1 # Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
2 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
4 # This library is free software; you can redistribute it and/or
5 # modify it under the terms of the GNU Lesser General Public
6 # License as published by the Free Software Foundation; either
7 # version 2.1 of the License.
9 # This library is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 # Lesser General Public License for more details.
14 # You should have received a copy of the GNU Lesser General Public
15 # License along with this library; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 # This is a Qt message file in .po format. Each msgid starts with
21 # a scope. This scope should *NOT* be translated - eg. translating
22 # from French to English, "Foo::Bar" would be translated to "Pub",
26 "Project-Id-Version: PROJECT VERSION\n"
27 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
28 "PO-Revision-Date: YYYY-MM-DD\n"
29 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
30 "Content-Type: text/plain; charset=iso-8859-1\n"
33 #==============================================================================
37 msgid "GEOM_BUT_APPLY"
41 msgid "GEOM_BUT_CLOSE"
45 msgid "GEOM_BUT_CANCEL"
66 msgid "GEOM_BUT_EXPLODE"
70 #==============================================================================
73 #: GeometryGUI.cxx:563
74 msgid "GEOM_INF_LOADED"
75 msgstr "Le fichier %1 est chargé."
78 #==============================================================================
81 #: GeometryGUI.cxx:3069
82 msgid "GEOM_PRP_COMMAND"
83 msgstr "Pas de commande associée à l'id = %1."
85 #: GeometryGUI.cxx:4977
86 msgid "GEOM_PRP_ABORT"
87 msgstr "L'opération a echoué"
89 #: GeometryGUI.cxx:5058
91 msgstr "Opération effectuée"
93 #: GeometryGUI.cxx:3717
94 msgid "GEOM_PRP_LOADING"
95 msgstr "Chargement de %1 ..."
97 #: GeometryGUI.cxx:1412
98 msgid "GEOM_PRP_NULLSHAPE"
99 msgstr "Erreur, objet inconsistant ou inapproprié !"
101 #: GeometryGUI.cxx:5072
102 msgid "GEOM_PRP_READY"
105 #: GeometryGUI.cxx:1690
106 msgid "GEOM_PRP_SELECT_SUBSHAPES"
107 msgstr "Selection de sous objets"
110 msgstr "Confirmer cette operation"
112 msgid "GEOM_CONFIRM_INFO"
113 msgstr "L'objet contient %1 sous objets"
116 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
117 msgstr "Non permis dans viewer VTK"
119 #: GeometryGUI.cxx:1690
120 msgid "GEOM_PRP_SHAPE_IN_STUDY"
121 msgstr "La shape principale doit etre avant dans l'etude"
123 #: GeometryGUI.cxx:1690
124 msgid "GEOM_PRP_SELECT_EDGE"
125 msgstr "Selectionner les edges et clicker sur Apply"
127 #: GeometryGUI.cxx:1690
128 msgid "GEOM_PRP_SELECT_FACE"
129 msgstr "Select les faces a supprimer et clicker sur Ok/Apply"
131 #: GeometryGUI.cxx:1690
132 msgid "GEOM_PRP_SELECT_FIRST"
133 msgstr "Selectionner la shape principale en premier"
135 #: GeometryGUI.cxx:1690
136 msgid "GEOM_PRP_MIN_DIST"
137 msgstr "Min Distance non calculer"
140 #==============================================================================
143 #: GeometryGUI.cxx:3698
144 msgid "GEOM_MEN_ALL_FILES"
145 msgstr "Tous fichiers ( * )"
147 #: GeometryGUI.cxx:4389
148 msgid "GEOM_MEN_ANGLE"
151 #: GeometryGUI.cxx:3941
152 msgid "GEOM_MEN_COMPONENT"
155 #: GeometryGUI.cxx:4389
156 msgid "GEOM_MEN_ENTER_ANGLE"
157 msgstr "Saisir un angle en degrés"
159 #: GeometryGUI.cxx:3758
160 msgid "GEOM_MEN_EXPORT"
163 #: GeometryGUI.cxx:3648
164 msgid "GEOM_MEN_IMPORT"
167 #: GeometryGUI.cxx:3761
168 msgid "GEOM_MEN_IMPORT_BREP"
169 msgstr "Fichiers BREP ( *.brep )"
171 #: GeometryGUI.cxx:3762
172 msgid "GEOM_MEN_IMPORT_IGES"
173 msgstr "Fichiers IGES ( *.iges *.igs )"
175 #: GeometryGUI.cxx:3763
176 msgid "GEOM_MEN_IMPORT_STEP"
177 msgstr "Fichiers STEP ( *.step *.stp )"
179 #: GeometryGUI.cxx:3763
180 msgid "GEOM_MEN_LOAD_SCRIPT"
181 msgstr "Fichiers PYTHON ( *.py )"
183 #: GeometryGUI.cxx:2931
184 msgid "GEOM_MEN_ISOS"
185 msgstr "Choisir un nombre d'isos"
187 #: GeometryGUI.cxx:4278
188 msgid "GEOM_MEN_POPUP_NAME"
191 #: GeometryGUI.cxx:4414
192 msgid "GEOM_MEN_SKETCHER_X"
193 msgstr "Saisir une longueur pour fixer X"
195 #: GeometryGUI.cxx:4438
196 msgid "GEOM_MEN_SKETCHER_Y"
197 msgstr "Saisir une longueur pour fixer Y"
199 #: GeometryGUI.cxx:2898
200 msgid "GEOM_MEN_TRANSPARENCY"
201 msgstr "Transparence"
203 #: GeometryGUI.cxx:4413
207 #: GeometryGUI.cxx:4437
211 #: GeometryGUI_NbIsosDlg.cxx:36
212 msgid "GEOM_MEN_ISOU"
215 #: GeometryGUI_NbIsosDlg.cxx:53
216 msgid "GEOM_MEN_ISOV"
219 #: GeometryGUI_TransparencyDlg.cxx:31
220 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
221 msgstr "Transparence :"
223 msgid "GEOM_MEN_STEP_LABEL"
226 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
227 msgstr "Noms identiques : selectionner avec la souris !"
229 msgid "GEOM_NAME_INCORRECT"
230 msgstr "Le nom saisi n'existe pas"
235 #==============================================================================
238 #: GeometryGUI.cxx:892
239 msgid "GEOM_WRN_RADIUS_NULL"
240 msgstr "Le rayon est nul"
242 #: GeometryGUI.cxx:3854
243 msgid "GEOM_WRN_WARNING"
244 msgstr "Avertissement"
246 #: GeometryGUI.cxx:3854
247 msgid "GEOM_REALLY_DELETE"
248 msgstr "Voulez-vous supprimer l'object(s) ?"
251 #==============================================================================
259 msgid "GEOM_MAIN_OBJECT"
260 msgstr "Objet Principal"
263 msgid "GEOM_TOOL_OBJECT"
267 msgid "GEOM_BASE_OBJECT"
268 msgstr "Objet De Base"
271 msgid "GEOM_PATH_OBJECT"
272 msgstr "Objet Chemin"
279 msgid "GEOM_OBJECT_I"
283 msgid "GEOM_OBJECT_RESULT"
284 msgstr "Objet Et Résultat"
291 msgid "GEOM_BASE_POINT"
292 msgstr "Point De Base"
295 msgid "GEOM_CENTER_POINT"
296 msgstr "Point Centre"
299 msgid "GEOM_DIAGONAL_POINTS"
300 msgstr "Points Diagonaux"
303 msgid "GEOM_CENTRAL_POINT"
304 msgstr "Point Central"
315 msgid "GEOM_ARGUMENTS"
327 msgid "GEOM_RADIUS_I"
343 msgid "GEOM_COORDINATES"
355 msgid "GEOM_REVERSE_U"
359 msgid "GEOM_REVERSE_V"
375 msgid "GEOM_VECTOR_LENGTH"
376 msgstr "Longueur Du Vecteur :"
379 msgid "GEOM_REVERSE_VECTOR"
380 msgstr "Renverser Le Vecteur"
383 msgid "GEOM_PLANE_MIRROR"
387 msgid "GEOM_FACE_SELECTION"
388 msgstr "Selection de Face"
395 msgid "GEOM_WATER_DENSITY"
396 msgstr "Densité de l'eau :"
399 msgid "GEOM_MESHING_DEFLECTION"
400 msgstr "Déflection Du Maillage :"
403 msgid "GEOM_DIMENSIONS"
407 msgid "GEOM_PRECISION"
411 msgid "GEOM_SELECTION"
415 msgid "GEOM_NB_TIMES"
419 msgid "GEOM_NB_TIMES_U"
420 msgstr "Nb. Fois U :"
423 msgid "GEOM_NB_TIMES_V"
424 msgstr "Nb. Fois V :"
439 #==============================================================================
443 msgid "GEOM_PARTITION"
447 msgid "GEOM_TOLERANCE"
451 msgid "GEOM_ORIENTATION"
459 msgid "GEOM_REVOLUTION"
463 msgid "GEOM_ROTATION"
467 msgid "GEOM_ARCHIMEDE"
479 msgid "GEOM_DISTANCE"
484 msgstr "Surface Par Courbes"
503 msgid "GEOM_TRANSLATION"
508 msgstr "Plan de Travail"
519 msgid "GEOM_SUB_SHAPE"
523 msgid "GEOM_SUPRESSFACE"
524 msgstr "Supression de Face"
535 msgid "GEOM_CHECK_SHAPE"
544 msgstr "Boite Anglobante"
548 msgstr "Centre de Masse"
551 msgid "GEOM_PROPERTIES"
552 msgstr "Basiques Proprietes"
555 msgid "GEOM_MULTITRANSLATION"
556 msgstr "Multi-Translation"
559 msgid "GEOM_MULTIROTATION"
560 msgstr "Multi-Rotation"
563 #==============================================================================
582 msgid "GEOM_ELLIPSE_TITLE"
583 msgstr "Construction d'Ellipses"
586 msgid "GEOM_RADIUS_MAJOR"
587 msgstr "Rayon max. :"
590 msgid "GEOM_RADIUS_MINOR"
591 msgstr "Rayon min. :"
594 msgid "GEOM_COMPOUND"
598 msgid "GEOM_COMPOUNDSOLID"
606 msgid "GEOM_CYLINDER"
646 msgid "GEOM_SURFCONE"
647 msgstr "Face Conique"
650 msgid "GEOM_SURFCYLINDER"
651 msgstr "Face Cylindrique"
654 msgid "GEOM_SURFSPHERE"
655 msgstr "Face Sphèrique"
658 msgid "GEOM_SURFTORUS"
659 msgstr "Face Toroique"
670 msgid "GEOM_VECTOR_U"
674 msgid "GEOM_VECTOR_V"
690 msgid "GEOM_PARAMETER"
695 #==============================================================================
739 #==============================================================================
743 msgid "GEOM_STEP_TITLE"
744 msgstr "Increment par défaut lors des constructions"
746 #: GeometryGUI_ArcDlg.cxx:45
747 msgid "GEOM_ARC_TITLE"
748 msgstr "Construction d'un Arc"
750 #: GeometryGUI_ArchimedeDlg.cxx:55
751 msgid "GEOM_ARCHIMEDE_TITLE"
752 msgstr "Construction d'Archimède"
754 #: GeometryGUI_BndBoxDlg.cxx:59
755 msgid "GEOM_BNDBOX_TITLE"
756 msgstr "Boite Englobante"
758 #: GeometryGUI_BndBoxDlg.cxx:82
759 msgid "GEOM_BNDBOX_OBJDIM"
760 msgstr "Objet and ses dimensions"
762 #: GeometryGUI_BoxDlg.cxx:50
763 msgid "GEOM_BOX_TITLE"
764 msgstr "Construction d'une Boite"
766 #: GeometryGUI_BoxDlg.cxx:50
768 msgstr "Dimensions A l'Origine"
770 #: GeometryGUI_ChamferDlg.cxx:58
771 msgid "GEOM_CHAMFER_TITLE"
772 msgstr "Construction d'un Chanfrein"
774 #: GeometryGUI_ChamferDlg.cxx:58
775 msgid "GEOM_CHAMFER_ALL"
776 msgstr "Chanfrein sur toute la Shape"
778 #: GeometryGUI_ChamferDlg.cxx:58
779 msgid "GEOM_CHAMFER_EDGES"
780 msgstr "Chanfrein sur Edges de la Shape"
782 #: GeometryGUI_ChamferDlg.cxx:58
783 msgid "GEOM_CHAMFER_FACES"
784 msgstr "Chanfrein sur Faces de la Shape"
786 #: GeometryGUI_CircleDlg.cxx:48
787 msgid "GEOM_CIRCLE_TITLE"
788 msgstr "Construction d'un Cercle"
790 #: GeometryGUI_CenterMassDlg.cxx:77
791 msgid "GEOM_CMASS_TITLE"
792 msgstr "Centre De Gravité"
794 msgid "GEOM_PLANE_SIZE"
795 msgstr "Taille du plan :"
797 #: GeometryGUI_CommonDlg.cxx:47
798 msgid "GEOM_COMMON_TITLE"
799 msgstr "BOOLEEN : Jonction De Deux Objets"
801 #: GeometryGUI_CompoundDlg.cxx:44
802 msgid "GEOM_COMPOUND_TITLE"
803 msgstr "Création d'un Compound"
805 #: GeometryGUI_ConeDlg.cxx:49
806 msgid "GEOM_CONE_TITLE"
807 msgstr "Construction d'un Cone"
809 #: GeometryGUI_CutDlg.cxx:48
810 msgid "GEOM_CUT_TITLE"
811 msgstr "BOOLEEN : Couper Deux Objets"
813 #: GeometryGUI_CylinderDlg.cxx:47
814 msgid "GEOM_CYLINDER_TITLE"
815 msgstr "Construction d'un Cylindre"
817 #: GeometryGUI_CheckShape.cxx:60
818 msgid "GEOM_CHECK_TITLE"
821 #: GeometryGUI_CheckShape.cxx:83
822 msgid "GEOM_CHECK_INFOS"
823 msgstr "Objet et ses Informations Topologiques"
825 #: GeometryGUI_DistanceDlg.cxx:57
826 msgid "GEOM_MINDIST_TITLE"
827 msgstr "Distance Minimale entre Deux Objets"
829 #: GeometryGUI_DistanceDlg.cxx:57
830 msgid "GEOM_MINDIST_OBJ"
831 msgstr "Objets Et Resultats"
833 #: GeometryGUI_EdgeDlg.cxx:47
834 msgid "GEOM_EDGE_TITLE"
835 msgstr "Création d'un Edge"
837 #: GeometryGUI_FilletDlg.cxx:58
838 msgid "GEOM_FILLET_TITLE"
839 msgstr "Construction d'un Congé"
841 #: GeometryGUI_FilletDlg.cxx:58
842 msgid "GEOM_FILLET_ALL"
843 msgstr "Congé sur toute la Shape"
845 #: GeometryGUI_FilletDlg.cxx:58
846 msgid "GEOM_FILLET_EDGES"
847 msgstr "Congé sur Edges de la Shape"
849 #: GeometryGUI_FilletDlg.cxx:58
850 msgid "GEOM_FILLET_FACES"
851 msgstr "Congé sur Faces de la Shape"
853 #: GeometryGUI_FaceDlg.cxx:49
854 msgid "GEOM_FACE_TITLE"
855 msgstr "Création d'une Face"
857 #: GeometryGUI_FaceDlg.cxx:78
858 msgid "GEOM_FACE_FFW"
859 msgstr "Face a partir d'un wire"
861 #: GeometryGUI_FaceDlg.cxx:103
862 msgid "GEOM_FACE_OPT"
863 msgstr "Création d'une Face plane"
865 #: GeometryGUI_FillingDlg.cxx:53
866 msgid "GEOM_FILLING_TITLE"
867 msgstr "Surface Par Courbes"
869 #: GeometryGUI_FillingDlg.cxx:112
870 msgid "GEOM_FILLING_ARG"
871 msgstr "Argument Et Parametres"
873 #: GeometryGUI_FillingDlg.cxx:128
874 msgid "GEOM_FILLING_MIN_DEG"
877 #: GeometryGUI_FillingDlg.cxx:142
878 msgid "GEOM_FILLING_MAX_DEG"
881 #: GeometryGUI_FillingDlg.cxx:150
882 msgid "GEOM_FILLING_TOL_2D"
885 #: GeometryGUI_FillingDlg.cxx:170
886 msgid "GEOM_FILLING_COMPOUND"
887 msgstr "Compound de Courbes"
889 #: GeometryGUI_FillingDlg.cxx:184
890 msgid "GEOM_FILLING_TOL_3D"
893 #: GeometryGUI_FillingDlg.cxx:192
894 msgid "GEOM_FILLING_NB_ITER"
897 #: GeometryGUI_FuseDlg.cxx:48
898 msgid "GEOM_FUSE_TITLE"
899 msgstr "BOOLEEN : Fusionner deux Objets"
901 #: GeometryGUI_InertiaDlg.cxx:42
902 msgid "GEOM_INERTIA_TITLE"
903 msgstr "Calculs d'Inertie"
905 #: GeometryGUI_InertiaDlg.cxx:50
906 msgid "GEOM_INERTIA_CONSTR"
907 msgstr "Matrice Et Moments d'Inertie"
909 #: GeometryGUI_InertiaDlg.cxx:100
910 msgid "GEOM_INERTIA_I"
913 #: GeometryGUI_InertiaDlg.cxx:182
914 msgid "GEOM_INERTIA_IXYZ"
915 msgstr "IX & IY & IZ"
917 #: GeometryGUI_LineDlg.cxx:50
918 msgid "GEOM_LINE_TITLE"
919 msgstr "Construction d'une Ligne"
921 #: GeometryGUI_MaxToleranceDlg.cxx:53
922 msgid "GEOM_TOLERANCE_TITLE"
923 msgstr "Tolerance Maximale"
925 #: GeometryGUI_MaxToleranceDlg.cxx:84
926 msgid "GEOM_TOLERANCE_CONSTR"
927 msgstr "Object et ses Tolerances"
929 #: GeometryGUI_MaxToleranceDlg.cxx:121
930 msgid "GEOM_TOLERANCE_FACE"
933 #: GeometryGUI_MaxToleranceDlg.cxx:138
934 msgid "GEOM_TOLERANCE_EDGE"
937 #: GeometryGUI_MaxToleranceDlg.cxx:155
938 msgid "GEOM_TOLERANCE_VERTEX"
941 #: GeometryGUI_MirrorDlg.cxx:52
942 msgid "GEOM_MIRROR_TITLE"
943 msgstr "Methode Miroir"
945 #: GeometryGUI_OrientationDlg.cxx:46
946 msgid "GEOM_ORIENTATION_TITLE"
947 msgstr "Changer l'Orientation"
949 #: GeometryGUI_OrientationDlg.cxx:134
950 msgid "GEOM_ORIENTATION_OPT"
951 msgstr "Renverser l'orientation avec une simulation de vecteur normal"
953 #: GeometryGUI_PartitionDlg.cxx:45
954 msgid "GEOM_PARTITION_TITLE"
955 msgstr "Partition d'Objects Avec Outils"
957 #: GeometryGUI_PartitionDlg.cxx:45
958 msgid "GEOM_KEEP_OBJECT"
961 #: GeometryGUI_PartitionDlg.cxx:45
962 msgid "GEOM_PARTITION_ORIENTATION"
963 msgstr "Change l'orientation"
965 #: GeometryGUI_PartitionDlg.cxx:45
966 msgid "SUPPRESS_RESULT"
967 msgstr "Suppress Result"
969 #: GeometryGUI_PipeDlg.cxx:47
970 msgid "GEOM_PIPE_TITLE"
971 msgstr "Construction d'une Pipe"
973 #: GeometryGUI_PointDlg.cxx:52
974 msgid "GEOM_POINT_TITLE"
975 msgstr "Construction d'un Point"
977 #: GeometryGUI_PlaneDlg.cxx:60
978 msgid "GEOM_PLANE_TITLE"
979 msgstr "Construction d'un Plan"
981 #: GeometryGUI_PlaneDlg.cxx:172
982 msgid "GEOM_PLANE_PVC"
983 msgstr "Point + Vecteur Coordonnes"
985 #: GeometryGUI_PlaneDlg.cxx:133
986 msgid "GEOM_PLANE_PV"
987 msgstr "Point + Vecteur"
989 #: GeometryGUI_PrismDlg.cxx:54
990 msgid "GEOM_PRISM_TITLE"
991 msgstr "Extruder une Shape de base"
993 #: GeometryGUI_PrismDlg.cxx:83
994 msgid "GEOM_PRISM_BSV"
995 msgstr "Shape de base + Vecteur"
997 #: GeometryGUI_PrismDlg.cxx:83
998 msgid "GEOM_PRISM_BSV_2P"
999 msgstr "Shape de base + 2 Points"
1001 #: GeometryGUI_PropertiesDlg.cxx:56
1002 msgid "GEOM_PROPERTIES_TITLE"
1003 msgstr "Proprietes Basiques"
1005 #: GeometryGUI_PropertiesDlg.cxx:78
1006 msgid "GEOM_PROPERTIES_CONSTR"
1007 msgstr "Objet et ses Proprietes"
1009 #: GeometryGUI_PropertiesDlg.cxx:114
1010 msgid "GEOM_PROPERTIES_SURFACE"
1013 #: GeometryGUI_PropertiesDlg.cxx:120
1014 msgid "GEOM_PROPERTIES_VOLUME"
1017 #: GeometryGUI_RevolDlg.cxx:49
1018 msgid "GEOM_REVOLUTION_TITLE"
1019 msgstr "Construction Par Revolution"
1021 #: GeometryGUI_RotationDlg.cxx:51
1022 msgid "GEOM_ROTATION_TITLE"
1023 msgstr "Rotation d'un Objet"
1025 #: GeometryGUI_ScaleDlg.cxx:52
1026 msgid "GEOM_SCALE_TITLE"
1027 msgstr "Echelle d'un Objet"
1029 #: GeometryGUI_ScaleDlg.cxx:117
1030 msgid "GEOM_SCALE_FACTOR"
1031 msgstr "Facteur d'echelle"
1033 #: GeometryGUI_SectionDlg.cxx:50
1034 msgid "GEOM_SECTION_TITLE"
1035 msgstr "BOOLEEN : Section De Deux Objets"
1037 #: GeometryGUI_SewingDlg.cxx:48
1038 msgid "GEOM_SEWING_TITLE"
1039 msgstr "Coudre des Topologies"
1041 #: GeometryGUI_ShellDlg.cxx:53
1042 msgid "GEOM_SHELL_TITLE"
1043 msgstr "Construction d'une Shell"
1045 #: GeometryGUI_SolidDlg.cxx:74
1046 msgid "GEOM_SOLID_TITLE"
1047 msgstr "Construction d'un Solid"
1049 #: GeometryGUI_SphereDlg.cxx:50
1050 msgid "GEOM_SPHERE_TITLE"
1051 msgstr "Construction d'une Sphere"
1053 #: GeometryGUI_SphereDlg.cxx:113
1054 msgid "GEOM_SPHERE_CR"
1055 msgstr "Centre + rayon"
1057 #: GeometryGUI_SphereDlg.cxx:146
1058 msgid "GEOM_SPHERE_RO"
1059 msgstr "Rayon a l'origine"
1061 #: GeometryGUI_SubShapeDlg.cxx:55
1062 msgid "GEOM_SUBSHAPE_TITLE"
1063 msgstr "Selection de Sous Shapes"
1065 #: GeometryGUI_SubShapeDlg.cxx:131
1066 msgid "GEOM_SUBSHAPE_TYPE"
1067 msgstr "Type de Sous Shapes"
1069 #: GeometryGUI_SubShapeDlg.cxx:137
1070 msgid "GEOM_SUBSHAPE_SELECT"
1071 msgstr "Selectionner de Sous Shapes"
1073 #: GeometryGUI_TorusDlg.cxx:51
1074 msgid "GEOM_TORUS_TITLE"
1075 msgstr "Constructiond'un Tore"
1077 #: GeometryGUI_SuppressFacesDlg.cxx:103
1078 msgid "GEOM_SUPRESSFACE_TITLE"
1079 msgstr "Supprimer des Faces dans un Objet"
1081 #: GeometryGUI_SuppressFacesDlg.cxx:164
1082 msgid "GEOM_SUPRESSFACE_SELECT"
1083 msgstr "Selectionner les Faces a Supprimer"
1085 #: GeometryGUI_TranslationDlg.cxx:78
1086 msgid "GEOM_TRANSLATION_COOR"
1087 msgstr "Translation Avec Coordonnees"
1089 msgid "GEOM_TRANSPARENCY_TITLE"
1090 msgstr "Transparence"
1092 msgid "GEOM_TRANSPARENCY_OPAQUE"
1095 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1096 msgstr "Transparent"
1098 msgid "GEOM_SUPPRESSHOLE_TITLE"
1099 msgstr "Suppression de trous"
1101 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1102 msgstr "Selection de la face initiale"
1104 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1105 msgstr "Selection du contour/trou sur la face"
1107 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1108 msgstr "Selection de la face terminale (si trou traversant)"
1110 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1111 msgstr "Selection de contour final (si trou traversant)"
1113 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1114 msgstr "Face ou shell"
1116 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1117 msgstr "Selection de trou(s) sur la face"
1119 #: GeometryGUI_TranslationDlg.cxx:56
1120 msgid "GEOM_TRANSLATION_TITLE"
1121 msgstr "Translation d'un Objet"
1123 #: GeometryGUI_VectorDlg.cxx:54
1124 msgid "GEOM_VECTOR_TITLE"
1125 msgstr "Construction d'un Vecteur"
1127 #: GeometryGUI_WhatisDlg.cxx:63
1128 msgid "GEOM_WHATIS_TITLE"
1131 #: GeometryGUI_WhatisDlg.cxx:86
1132 msgid "GEOM_WHATIS_OBJECT"
1133 msgstr "Objet et ses Informations Topologiques"
1135 #: GeometryGUI_WireDlg.cxx:46
1136 msgid "GEOM_WIRE_TITLE"
1137 msgstr "Creer un Wire"
1139 #: GeometryGUI_WireDlg.cxx:103
1140 msgid "GEOM_WIRE_CONNECT"
1141 msgstr "Creation d'un Wire a partir de wires/edges connectes"
1143 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1144 msgid "GEOM_WPLANE_TITLE"
1145 msgstr "plan de travail"
1147 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1148 msgid "GEOM_WPLANE_FACE"
1149 msgstr "Plan Ou Face plane"
1151 #: GeometryGUI_multiTranslationDlg.cxx:107
1152 msgid "GEOM_MULTITRANSLATION_TITLE"
1153 msgstr "Multi-Translation"
1155 #: GeometryGUI_multiTranslationDlg.cxx:107
1156 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1157 msgstr "Multi Translation Simple"
1159 #: GeometryGUI_multiTranslationDlg.cxx:107
1160 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1161 msgstr "Multi Translation Double"
1163 #: GeometryGUI_multiRotationDlg.cxx:107
1164 msgid "GEOM_MULTIROTATION_TITLE"
1165 msgstr "Multi-Rotation"
1167 #: GeometryGUI_multiRotationDlg.cxx:107
1168 msgid "GEOM_MULTIROTATION_SIMPLE"
1169 msgstr "Multi Rotation Simple"
1171 #: GeometryGUI_multiRotationDlg.cxx:107
1172 msgid "GEOM_MULTIROTATION_DOUBLE"
1173 msgstr "Multi Rotation Double"
1175 msgid "GEOM_PARAM_POINT"
1176 msgstr "Point paramétrique"
1179 #==============================================================================
1182 #: GeometryGUI.cxx:4613
1183 msgid "GEOM_MEN_WIREFRAME"
1186 #: GeometryGUI.cxx:4613
1187 msgid "GEOM_MEN_SHADING"
1190 msgid "GEOM_RECONSTRUCTION_LIMIT"
1191 msgstr "Limite de Reconstruction"
1193 msgid "GEOM_KEEP_NONLIMIT_SHAPES"
1194 msgstr "Keep nonlimit shapes"
1196 msgid "GEOM_SUPPRESS_RESULT"
1197 msgstr "Supprimer le Resultat"
1199 msgid "GEOM_SUPPRESS_RESULT_INSIDE"
1202 msgid "GEOM_SUPPRESS_RESULT_OUTSIDE"
1205 msgid "GEOM_RECONSTRUCTION_LIMIT_SHAPE"
1207 msgid "GEOM_RECONSTRUCTION_LIMIT_SOLID"
1209 msgid "GEOM_RECONSTRUCTION_LIMIT_SHELL"
1211 msgid "GEOM_RECONSTRUCTION_LIMIT_FACE"
1213 msgid "GEOM_RECONSTRUCTION_LIMIT_WIRE"
1215 msgid "GEOM_RECONSTRUCTION_LIMIT_EDGE"
1217 msgid "GEOM_RECONSTRUCTION_LIMIT_VERTEX"
1220 msgid "GEOM_SPLINE_TITLE"
1221 msgstr "Construction de Splines"
1226 msgid "GEOM_INTERPOL"
1227 msgstr "Interpolation"
1230 #==============================================================================
1233 msgid "GEOM_SKETCHER_EL"
1234 msgstr "Type d'Element"
1236 msgid "GEOM_BUT_CLOSE_SKETCH"
1237 msgstr "Fermer Sketch"
1239 msgid "GEOM_BUT_END_SKETCH"
1240 msgstr "Terminer Sketch"
1242 msgid "GEOM_SKETCHER_TITLE"
1243 msgstr "Construction de Sketch"
1245 msgid "GEOM_SKETCHER_POINT"
1248 msgid "GEOM_SKETCHER_SEGMENT"
1251 msgid "GEOM_SKETCHER_ARC"
1254 msgid "GEOM_SKETCHER_DIR"
1257 msgid "GEOM_SKETCHER_POINT2"
1260 msgid "GEOM_SKETCHER_DEST"
1261 msgstr "Destination"
1263 msgid "GEOM_SKETCHER_ABS"
1266 msgid "GEOM_SKETCHER_REL"
1269 msgid "GEOM_SKETCHER_SEL"
1272 msgid "GEOM_SKETCHER_ANGLE"
1275 msgid "GEOM_SKETCHER_PER"
1276 msgstr "Perpendiculaire"
1278 msgid "GEOM_SKETCHER_TAN"
1281 msgid "GEOM_SKETCHER_VXVY"
1284 msgid "GEOM_SKETCHER_LENGTH"
1287 msgid "GEOM_SKETCHER_X"
1290 msgid "GEOM_SKETCHER_Y"
1293 msgid "GEOM_SKETCHER_X2"
1296 msgid "GEOM_SKETCHER_Y2"
1299 msgid "GEOM_SKETCHER_X3"
1302 msgid "GEOM_SKETCHER_Y3"
1305 msgid "GEOM_SKETCHER_DX2"
1308 msgid "GEOM_SKETCHER_DY2"
1311 msgid "GEOM_SKETCHER_VX2"
1314 msgid "GEOM_SKETCHER_VY2"
1317 msgid "GEOM_SKETCHER_LENGTH2"
1320 msgid "GEOM_SKETCHER_ANGLE2"
1323 msgid "GEOM_SKETCHER_RADIUS2"
1326 msgid "GEOM_SKETCHER_UNDO"
1329 msgid "GEOM_SKETCHER_APPLY"
1332 msgid "GEOM_SKETCHER_VALUES"
1335 msgid "GEOM_SKETCHER_TYPE"
1338 msgid "GEOM_FILLET_ABORT"
1339 msgstr "Le congé ne peut-être realisé avec un rayon de %1 "
1341 msgid "GEOM_CHAMFER_ABORT"
1342 msgstr "Le chanfrein ne peut-être realisé avec %1 et %2 "