src/FiltersPlugin/Test/Test2951.py

   1 # Copyright (C) 2014-2024  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  29 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
  30 SketchPoint_1 = SketchProjection_1.createdFeature()
  31 SketchCircle_1 = Sketch_1.addCircle(0, 0, 25)
  32 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
  33 SketchLine_1 = Sketch_1.addLine(-35, 23, -35, -23)
  34 SketchLine_2 = Sketch_1.addLine(-35, -23, -28, -23)
  35 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  36 SketchLine_3 = Sketch_1.addLine(-28, -23, -23, -28)
  37 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  38 SketchLine_4 = Sketch_1.addLine(-23, -28, -23, -35)
  39 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  40 SketchLine_5 = Sketch_1.addLine(-23, -35, 23, -35)
  41 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  42 SketchLine_6 = Sketch_1.addLine(23, -35, 23, -28)
  43 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  44 SketchLine_7 = Sketch_1.addLine(23, -28, 28, -23)
  45 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  46 SketchLine_8 = Sketch_1.addLine(28, -23, 35, -23)
  47 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  48 SketchLine_9 = Sketch_1.addLine(35, -23, 35, 23)
  49 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  50 SketchLine_10 = Sketch_1.addLine(35, 23, 28, 23)
  51 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  52 SketchLine_11 = Sketch_1.addLine(28, 23, 23, 28)
  53 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  54 SketchLine_12 = Sketch_1.addLine(23, 28, 23, 35)
  55 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  56 SketchLine_13 = Sketch_1.addLine(23, 35, -23, 35)
  57 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  58 SketchLine_14 = Sketch_1.addLine(-23, 35, -23, 28)
  59 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  60 SketchLine_15 = Sketch_1.addLine(-23, 28, -28, 23)
  61 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
  62 SketchLine_16 = Sketch_1.addLine(-28, 23, -35, 23)
  63 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
  64 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_16.endPoint())
  65 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
  66 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_9.result())
  67 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_13.result())
  68 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_5.result())
  69 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_2.result())
  70 SketchConstraintCollinear_1 = Sketch_1.setCollinear(SketchLine_2.result(), SketchLine_8.result())
  71 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_16.result())
  72 SketchConstraintCollinear_2 = Sketch_1.setCollinear(SketchLine_16.result(), SketchLine_10.result())
  73 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_4.result())
  74 SketchConstraintCollinear_3 = Sketch_1.setCollinear(SketchLine_4.result(), SketchLine_14.result())
  75 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_6.result())
  76 SketchConstraintCollinear_4 = Sketch_1.setCollinear(SketchLine_6.result(), SketchLine_12.result())
  77 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_2.result(), SketchLine_4.result())
  78 SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_16.result(), SketchLine_14.result())
  79 SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_2.result(), SketchLine_16.result())
  80 SketchConstraintEqual_4 = Sketch_1.setEqual(SketchLine_14.result(), SketchLine_12.result())
  81 SketchConstraintEqual_5 = Sketch_1.setEqual(SketchLine_12.result(), SketchLine_10.result())
  82 SketchConstraintEqual_6 = Sketch_1.setEqual(SketchLine_10.result(), SketchLine_8.result())
  83 SketchConstraintEqual_7 = Sketch_1.setEqual(SketchLine_6.result(), SketchLine_4.result())
  84 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_9.result(), 35, True)
  85 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchCircle_1.center(), SketchLine_1.result(), 35, True)
  86 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_5.result(), 35, True)
  87 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_13.result(), 35, True)
  88 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 25)
  89 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), 7)
  90 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_4.result(), 23, True)
  91 SketchConstraintDistance_6 = Sketch_1.setDistance(SketchCircle_1.center(), SketchLine_2.result(), 23, True)
  92 SketchConstraintDistance_7 = Sketch_1.setDistance(SketchCircle_1.center(), SketchLine_12.result(), 23, True)
  93 SketchConstraintDistance_8 = Sketch_1.setDistance(SketchCircle_1.center(), SketchLine_16.result(), 23, True)
  94 model.do()
  95 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f-SketchLine_9f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_14f-SketchLine_15f-SketchLine_16f-SketchCircle_1_2r")], model.selection(), 10, 0)
  96 Filters = model.filters(Part_1_doc, [model.addFilter(name = "OppositeToEdge", args = [model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_9][Extrusion_1_1/To_Face]")])])
  97 model.end()
  98
  99 from GeomAPI import *
 100
 101 Reference = {}
 102 ExtrusionResult = Extrusion_1.result().resultSubShapePair()[0]
 103 exp = GeomAPI_ShapeExplorer(ExtrusionResult.shape(), GeomAPI_Shape.EDGE)
 104 # edges on face 1
 105 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 106 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 107 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 108 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 109 # edges on face 2
 110 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 111 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 112 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 113 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 114 # edges on face 3
 115 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 116 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 117 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 118 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 119 # edges on face 4
 120 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 121 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 122 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 123 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 124 # edges on face 5
 125 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 126 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 127 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 128 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 129 # edges on face 6
 130 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 131 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 132 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 133 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 134 # edges on face 7
 135 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 136 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 137 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 138 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 139 # edges on face 8
 140 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 141 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 142 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 143 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 144 # edges on face 9
 145 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 146 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 147 Reference[model.selection(ExtrusionResult, exp.current())] = True;  exp.next()
 148 Reference[model.selection(ExtrusionResult, exp.current())] = True;  exp.next()
 149 # edges on face 10
 150 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 151 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 152 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 153 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 154 # edges on face 11
 155 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 156 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 157 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 158 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 159 # edges on face 12
 160 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 161 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 162 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 163 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 164 # edges on face 13
 165 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 166 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 167 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 168 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 169 # edges on face 14
 170 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 171 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 172 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 173 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 174 # edges on face 15
 175 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 176 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 177 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 178 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 179 # edges on face 16
 180 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 181 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 182 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 183 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 184 # edges on face 17
 185 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 186 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 187 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 188 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 189 # edges on face 18
 190 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 191 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 192 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 193 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 194 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 195 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 196 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 197 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 198 Reference[model.selection(ExtrusionResult, exp.current())] = True;  exp.next()
 199 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 200 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 201 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 202 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 203 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 204 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 205 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 206 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 207 # edges on face 19
 208 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 209 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 210 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 211 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 212 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 213 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 214 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 215 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 216 Reference[model.selection(ExtrusionResult, exp.current())] = True;  exp.next()
 217 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 218 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 219 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 220 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 221 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 222 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 223 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 224 Reference[model.selection(ExtrusionResult, exp.current())] = False; exp.next()
 225 assert(not exp.more())
 226
 227 model.checkFilter(Part_1_doc, model, Filters, Reference)