src/FeaturesPlugin/Test/TestSplitWireFace.py

   1 # Copyright (C) 2014-2022  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 model.addParameter(Part_1_doc, "R", "50")
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(-49.81325699578132, 35.39936274902501, 0, 8.200436015051352)
  29 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
  30 SketchLine_2 = SketchProjection_1.createdFeature()
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
  32 SketchLine_3 = Sketch_1.addLine(0, 8.200436015051352, 49.94978427678259, 33.32234621934526)
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
  34 SketchArc_1 = Sketch_1.addArc(0, 31.08202242513997, 49.94978427678259, 33.32234621934526, -49.81325699578132, 35.39936274902501, False)
  35 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.endPoint())
  37 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_2.result())
  38 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R")
  39 model.do()
  40 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  41 SketchLine_4 = Sketch_2.addLine(29.74624907439609, 30.07487215963349, 31.08202242513997, 0)
  42 SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchArc_1"), False)
  43 SketchPoint_1 = SketchProjection_2.createdFeature()
  44 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchPoint_1.result())
  45 SketchLine_5 = Sketch_2.addLine(31.08202242513997, 0, 45.45797599933665, 0)
  46 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  47 SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
  48 SketchLine_6 = SketchProjection_3.createdFeature()
  49 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
  50 SketchLine_7 = Sketch_2.addLine(45.45797599933665, 0, 45.83553599350717, -22.747645239555)
  51 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
  52 SketchLine_8 = Sketch_2.addLine(45.83553599350717, -22.747645239555, 70.40999925541598, 30.039147749218)
  53 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  54 SketchLine_9 = Sketch_2.addLine(70.40999925541598, 30.039147749218, 29.74624907439609, 30.07487215963349)
  55 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  56 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_9.endPoint())
  57 model.do()
  58 Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchArc_1_2f_wire")])
  59 Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_4r-SketchLine_5f-SketchLine_7f-SketchLine_8f-SketchLine_9f_wire")])
  60 Split_1 = model.addSplit(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("FACE", "Face_1_1")])
  61 model.do()
  62
  63 model.checkResult(Split_1, model, 1, [0], [0], [0], [6], [12])
  64 model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
  65
  66 model.end()
  67
  68 assert(model.checkPythonDump())