src/FeaturesPlugin/Test/TestSplitShellWire.py

   1 # Copyright (C) 2014-2022  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 model.addParameter(Part_1_doc, "D", "50")
  29 model.addParameter(Part_1_doc, "L", "30")
  30 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  31 SketchLine_1 = Sketch_1.addLine(0, 28.78679656440358, 21.21320343559643, 50)
  32 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
  33 SketchLine_2 = SketchProjection_1.createdFeature()
  34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
  35 SketchLine_3 = Sketch_1.addLine(21.21320343559643, 50, 0, 71.21320343559643)
  36 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
  37 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
  38 SketchLine_4 = Sketch_1.addLine(0, 71.21320343559643, -21.21320343559642, 50)
  39 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  40 SketchLine_5 = Sketch_1.addLine(-21.21320343559642, 50, 0, 28.78679656440358)
  41 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  42 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
  43 SketchLine_6 = Sketch_1.addLine(-21.21320343559642, 50, 21.21320343559643, 50)
  44 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
  45 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
  46 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
  47 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
  48 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
  49 SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
  50 SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
  51 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
  52 model.do()
  53 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  54 SketchLine_7 = Sketch_2.addLine(-14.33356820392057, 60, 15.66643179607943, 60)
  55 SketchLine_8 = Sketch_2.addLine(15.66643179607943, 60, 15.66643179607943, 30)
  56 SketchLine_9 = Sketch_2.addLine(15.66643179607943, 30, -14.33356820392057, 30)
  57 SketchLine_10 = Sketch_2.addLine(-14.33356820392057, 30, -14.33356820392057, 60)
  58 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_7.startPoint())
  59 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  60 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  61 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  62 SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_7.result())
  63 SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_8.result())
  64 SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_9.result())
  65 SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_10.result())
  66 SketchConstraintLength_2 = Sketch_2.setLength(SketchLine_9.result(), "L")
  67 SketchConstraintLength_3 = Sketch_2.setLength(SketchLine_8.result(), "L")
  68 SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
  69 SketchPoint_1 = SketchProjection_2.createdFeature()
  70 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_9.result(), "L", True)
  71 model.do()
  72 Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_6r-SketchLine_5f_wire")])
  73 Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_3f-SketchLine_4f-SketchLine_6f_wire")])
  74 Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
  75 Wire_1_objects = [model.selection("EDGE", "Sketch_2/SketchLine_7"), model.selection("EDGE", "Sketch_2/SketchLine_8"), model.selection("EDGE", "Sketch_2/SketchLine_9"), model.selection("EDGE", "Sketch_2/SketchLine_10")]
  76 Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
  77 Split_1 = model.addSplit(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("WIRE", "Wire_1_1")])
  78 model.do()
  79
  80 model.checkResult(Split_1, model, 1, [0], [0], [8], [30], [60])
  81 model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
  82
  83 model.end()
  84
  85 assert(model.checkPythonDump())