src/FeaturesPlugin/Test/TestSplitShellFace.py

   1 # Copyright (C) 2014-2019  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 model.addParameter(Part_1_doc, "D", "50")
  29 model.addParameter(Part_1_doc, "L", "30")
  30 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  31 SketchLine_1 = Sketch_1.addLine(-6, 29.93619865618197, 18, 47.93619865618197)
  32 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
  33 SketchLine_2 = SketchProjection_1.createdFeature()
  34 SketchLine_3 = Sketch_1.addLine(18, 47.93619865618197, 0, 71.93619865618197)
  35 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
  36 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
  37 SketchLine_4 = Sketch_1.addLine(0, 71.93619865618197, -24, 53.93619865618197)
  38 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  39 SketchLine_5 = Sketch_1.addLine(-24, 53.93619865618197, -6, 29.93619865618197)
  40 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  41 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
  42 SketchLine_6 = Sketch_1.addLine(-24, 53.93619865618197, 18, 47.93619865618197)
  43 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
  44 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
  45 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
  46 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
  47 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
  48 SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
  49 SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
  50 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
  51 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_5.endPoint(), SketchLine_2.result(), "L/5", True)
  52 model.do()
  53 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  54 SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
  55 SketchPoint_1 = SketchProjection_2.createdFeature()
  56 SketchLine_7 = Sketch_2.addLine(50, -39.61510263929618, 50, 43.87280058651025)
  57 SketchLine_7.setName("SketchLine_8")
  58 SketchLine_7.result().setName("SketchLine_8")
  59 SketchLine_7.setAuxiliary(True)
  60 SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_7.result())
  61 SketchConstraintDistance_3 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_7.result(), "D", True)
  62 SketchLine_8 = Sketch_2.addLine(50, -3.170182618622045, 80, -14.17077918941143)
  63 SketchLine_8.setName("SketchLine_9")
  64 SketchLine_8.result().setName("SketchLine_9")
  65 SketchLine_9 = Sketch_2.addLine(80, -14.17077918941143, 64.99999999999999, 12.18920647716607)
  66 SketchLine_9.setName("SketchLine_11")
  67 SketchLine_9.result().setName("SketchLine_11")
  68 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  69 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_9")
  70 SketchLine_10 = Sketch_2.addLine(64.99999999999999, 12.18920647716607, 50, 12.18920647716607)
  71 SketchLine_10.setName("SketchLine_12")
  72 SketchLine_10.result().setName("SketchLine_12")
  73 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  74 SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10")
  75 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_7.result())
  76 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11")
  77 SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_8.endPoint(), SketchLine_7.result(), "L", True)
  78 SketchConstraintDistance_5 = Sketch_2.setDistance(SketchLine_9.endPoint(), SketchLine_7.result(), "L/2", True)
  79 SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_10.result())
  80 SketchConstraintMirror_1_objects = [SketchLine_8.result(), SketchLine_9.result(), SketchLine_10.result()]
  81 SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_7.result(), SketchConstraintMirror_1_objects)
  82 [SketchLine_11, SketchLine_12, SketchLine_13] = SketchConstraintMirror_1.mirrored()
  83 SketchLine_13.setName("SketchLine_15")
  84 SketchLine_13.result().setName("SketchLine_15")
  85 SketchLine_12.setName("SketchLine_14")
  86 SketchLine_12.result().setName("SketchLine_14")
  87 SketchLine_11.setName("SketchLine_13")
  88 SketchLine_11.result().setName("SketchLine_13")
  89 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchLine_3_EndVertex"), False)
  90 SketchPoint_2 = SketchProjection_3.createdFeature()
  91 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_9.result())
  92 SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_12")
  93 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_7.result())
  94 SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_13")
  95 model.do()
  96 Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_6r-SketchLine_5f_wire")])
  97 Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_3f-SketchLine_4f-SketchLine_6f_wire")])
  98 Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
  99 Face_3 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_15r-SketchLine_14r-SketchLine_13r_wire")])
 100 Split_1 = model.addSplit(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("FACE", "Face_3_1")])
 101 model.do()
 102
 103 model.checkResult(Split_1, model, 1, [0], [0], [4], [13], [26])
 104 model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
 105
 106 model.end()
 107
 108 assert(model.checkPythonDump())