src/FeaturesPlugin/Test/TestPartition_SolidsHistory.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 # Test that partition of solid works correctly after movement of groups after this partition
  21
  22 from salome.shaper import model
  23 from ModelAPI import *
  24 from GeomAPI import *
  25
  26 model.begin()
  27 partSet = model.moduleDocument()
  28 Part_1 = model.addPart(partSet)
  29 Part_1_doc = Part_1.document()
  30 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  31 SketchLine_1 = Sketch_1.addLine(-16.04556650246306, 45.15147783251232, -31.59359605911331, 45.15147783251232)
  32 SketchLine_2 = Sketch_1.addLine(-31.59359605911331, 45.15147783251232, -31.59359605911331, 29.10591133004927)
  33 SketchLine_3 = Sketch_1.addLine(-31.59359605911331, 29.10591133004927, -16.04556650246306, 29.10591133004927)
  34 SketchLine_4 = Sketch_1.addLine(-16.04556650246306, 29.10591133004927, -16.04556650246306, 45.15147783251232)
  35 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  36 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  37 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  38 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  39 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  40 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  41 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  42 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  43 SketchLine_5 = Sketch_1.addLine(12.4384236453202, 13.06034482758621, -5.846059113300496, 13.06034482758621)
  44 SketchLine_6 = Sketch_1.addLine(-5.846059113300496, 13.06034482758621, -5.846059113300496, -6.965517241379309)
  45 SketchLine_7 = Sketch_1.addLine(-5.846059113300496, -6.965517241379309, 12.4384236453202, -6.965517241379309)
  46 SketchLine_8 = Sketch_1.addLine(12.4384236453202, -6.965517241379309, 12.4384236453202, 13.06034482758621)
  47 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  48 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  49 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  50 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  51 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
  52 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
  53 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
  54 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
  55 model.do()
  56 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  57 SketchCircle_1 = Sketch_2.addCircle(-10.81448298196523, 20.3003568426161, 15.58088381891068)
  58 SketchLine_9 = Sketch_2.addLine(-19.86849367207068, 32.98061042849822, 0.2083042015703297, 9.288449501673265)
  59 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_9.startPoint(), SketchCircle_1.results()[1])
  60 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchCircle_1.results()[1])
  61 model.do()
  62 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1"), model.selection("COMPOUND", "Sketch_2")], model.selection(), 10, 0)
  63 Group_1 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_3_2")])
  64 Group_2_objects = [model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4"), model.selection("FACE", "Extrusion_1_3_2/Generated_Face&Sketch_2/SketchCircle_1_2"), model.selection("FACE", "Extrusion_1_3_1/Generated_Face&Sketch_2/SketchCircle_1_2&weak_name_1"), model.selection("FACE", "Extrusion_1_2/To_Face")]
  65 Group_2 = model.addGroup(Part_1_doc, Group_2_objects)
  66 Partition_1_objects = [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2"), model.selection("COMPSOLID", "Extrusion_1_3")]
  67 Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects)
  68 model.do()
  69 # move groups after the partitiion
  70 Part_1_doc.moveFeature(Group_1.feature(), Partition_1.feature())
  71 Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
  72 model.end()
  73
  74 # check groups are correct
  75 aFactory = ModelAPI_Session.get().validators()
  76 selectionList = Group_1.feature().selectionList("group_list")
  77 assert(selectionList.size() == 5)
  78 assert(aFactory.validate(Group_1.feature()))
  79 for i in range(5):
  80   assert(Group_1.groupList().value(i).value().shapeType() == GeomAPI_Shape.SOLID)
  81
  82 selectionList = Group_2.feature().selectionList("group_list")
  83 assert(selectionList.size() == 10)
  84 assert(aFactory.validate(Group_2.feature()))
  85 for i in range(10):
  86   assert(Group_2.groupList().value(i).value().shapeType() == GeomAPI_Shape.FACE)
  87
  88 assert(model.checkPythonDump())