src/FeaturesPlugin/Test/TestPartitionFaceSolid.py

   1 # Copyright (C) 2017-2021  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  28 SketchLine_1 = Sketch_1.addLine(29.00299588076832, 85.46917598420691, 38.5336063380206, 85.46917598420691)
  29 SketchLine_2 = Sketch_1.addLine(38.5336063380206, 85.46917598420691, 51.24108694769031, 59.52473640613128)
  30 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  31 SketchLine_3 = Sketch_1.addLine(51.24108694769031, 59.52473640613128, 51.24108694769031, 20.87281621838598)
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  33 SketchLine_4 = Sketch_1.addLine(51.24108694769031, 20.87281621838598, 74.53813473208469, 20.87281621838598)
  34 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  35 SketchLine_5 = Sketch_1.addLine(74.53813473208469, 20.87281621838598, 74.53813473208469, 7.635857249980032)
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  37 SketchLine_6 = Sketch_1.addLine(74.53813473208469, 7.635857249980032, 29.00299588076832, 7.635857249980032)
  38 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  39 SketchLine_7 = Sketch_1.addLine(29.00299588076832, 7.635857249980032, 29.00299588076832, 85.46917598420691)
  40 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  41 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_7.endPoint())
  42 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_7.result())
  43 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_3.result())
  44 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_5.result())
  45 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_6.result())
  46 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
  47 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_1.result())
  48 model.do()
  49 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection("EDGE", "PartSet/OZ"), 180, 0)
  50 Sketch_2 = model.addSketch(Part_1_doc,  model.standardPlane("YOZ"))
  51 SketchLine_8 = Sketch_2.addLine(61.72045613220821, 51.92790864086226, -64.56856594464165, 51.92790864086226)
  52 SketchLine_9 = Sketch_2.addLine(-64.56856594464165, 51.92790864086226, -64.56856594464165, -5.323114700643004)
  53 SketchLine_10 = Sketch_2.addLine(-64.56856594464165, -5.323114700643004, 61.72045613220821, -5.323114700643004)
  54 SketchLine_11 = Sketch_2.addLine(61.72045613220821, -5.323114700643004, 61.72045613220821, 51.92790864086226)
  55 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_8.startPoint())
  56 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  57 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  58 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  59 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
  60 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
  61 SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_10.result())
  62 SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_11.result())
  63 model.do()
  64 Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_8r-SketchLine_9f-SketchLine_10f-SketchLine_11f")])
  65 Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Revolution_1_1"), model.selection("FACE", "Face_1_1")])
  66 model.do()
  67
  68 model.checkResult(Partition_1,model,1,[4],[1],[16],[82],[164])
  69 model.testHaveNamingSubshapes(Partition_1,model,Part_1_doc)
  70
  71 model.end()
  72
  73 assert(model.checkPythonDump())