src/FeaturesPlugin/Test/TestPartitionFaceSolid.py

   1 ## Copyright (C) 2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  29 SketchLine_1 = Sketch_1.addLine(29.00299588076832, 85.46917598420691, 38.5336063380206, 85.46917598420691)
  30 SketchLine_2 = Sketch_1.addLine(38.5336063380206, 85.46917598420691, 51.24108694769031, 59.52473640613128)
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  32 SketchLine_3 = Sketch_1.addLine(51.24108694769031, 59.52473640613128, 51.24108694769031, 20.87281621838598)
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  34 SketchLine_4 = Sketch_1.addLine(51.24108694769031, 20.87281621838598, 74.53813473208469, 20.87281621838598)
  35 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  36 SketchLine_5 = Sketch_1.addLine(74.53813473208469, 20.87281621838598, 74.53813473208469, 7.635857249980032)
  37 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  38 SketchLine_6 = Sketch_1.addLine(74.53813473208469, 7.635857249980032, 29.00299588076832, 7.635857249980032)
  39 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  40 SketchLine_7 = Sketch_1.addLine(29.00299588076832, 7.635857249980032, 29.00299588076832, 85.46917598420691)
  41 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  42 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_7.endPoint())
  43 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_7.result())
  44 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_3.result())
  45 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_5.result())
  46 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_6.result())
  47 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
  48 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_1.result())
  49 model.do()
  50 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_3r-SketchLine_4r-SketchLine_5r-SketchLine_6r-SketchLine_7r")], model.selection("EDGE", "PartSet/OZ"), 180, 0)
  51 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/To_Face_1"))
  52 SketchLine_8 = Sketch_2.addLine(61.72045613220821, 51.92790864086226, -64.56856594464165, 51.92790864086226)
  53 SketchLine_9 = Sketch_2.addLine(-64.56856594464165, 51.92790864086226, -64.56856594464165, -5.323114700643004)
  54 SketchLine_10 = Sketch_2.addLine(-64.56856594464165, -5.323114700643004, 61.72045613220821, -5.323114700643004)
  55 SketchLine_11 = Sketch_2.addLine(61.72045613220821, -5.323114700643004, 61.72045613220821, 51.92790864086226)
  56 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_8.startPoint())
  57 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  58 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  59 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  60 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
  61 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
  62 SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_10.result())
  63 SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_11.result())
  64 model.do()
  65 Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_8"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_11"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_10"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_9")])
  66 Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Revolution_1_1"), model.selection("FACE", "Face_1_1")])
  67 model.do()
  68
  69 model.checkResult(Partition_1,model,1,[4],[1],[16],[82],[164])
  70 model.testHaveNamingSubshapes(Partition_1,model,Part_1_doc)
  71
  72 model.end()
  73
  74 assert(model.checkPythonDump())