src/FeaturesPlugin/Test/TestPartition2Solids.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 # -*- coding: utf-8 -*-
  22
  23 from salome.shaper import model
  24
  25 model.begin()
  26 partSet = model.moduleDocument()
  27 Part_1 = model.addPart(partSet)
  28 Part_1_doc = Part_1.document()
  29 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  30 SketchLine_1 = Sketch_1.addLine(-43.90694444444443, 28.05555555555554, 19.21805555555554, 72.66388888888889)
  31 SketchLine_2 = Sketch_1.addLine(19.21805555555554, 72.66388888888889, 82.06249999999999, -36.19166666666666)
  32 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  33 SketchLine_3 = Sketch_1.addLine(82.06249999999999, -36.19166666666666, 19.4986111111111, -81.3611111111111)
  34 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  35 SketchLine_4 = Sketch_1.addLine(19.4986111111111, -81.3611111111111, -45.87083333333333, -45.44999999999999)
  36 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  37 SketchLine_5 = Sketch_1.addLine(-45.87083333333333, -45.44999999999999, -43.90694444444443, 28.05555555555554)
  38 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  39 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
  40 model.do()
  41 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_5r-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 100, 0)
  42 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3"))
  43 SketchLine_6 = Sketch_2.addLine(74.07000206783135, -18.10965884648514, 62.37497281453477, -31.70853007124862)
  44 SketchLine_7 = Sketch_2.addLine(62.37497281453477, -31.70853007124862, 37.35304976096997, -31.43655264675337)
  45 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  46 SketchLine_8 = Sketch_2.addLine(37.35304976096997, -31.43655264675337, 25.65802050767337, -1.791013376768974)
  47 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  48 SketchLine_9 = Sketch_2.addLine(25.65802050767337, -1.791013376768974, 69.44638585141178, 6.640286782584385)
  49 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  50 SketchLine_10 = Sketch_2.addLine(69.44638585141178, 6.640286782584385, 74.07000206783135, -18.10965884648514)
  51 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  52 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_6.startPoint(), SketchLine_10.endPoint())
  53 model.do()
  54 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_10r-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r")], model.selection(), 10, 160)
  55 Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1")])
  56 model.do()
  57
  58 model.checkResult(Partition_1,model,1,[4],[4],[33],[150],[300])
  59 model.testHaveNamingSubshapes(Partition_1,model,Part_1_doc)
  60
  61 model.end()
  62
  63 assert(model.checkPythonDump())