src/FeaturesPlugin/Test/TestFillWireFace.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 # -*- coding: utf-8 -*-
  22
  23 from salome.shaper import model
  24
  25 model.begin()
  26 partSet = model.moduleDocument()
  27 Part_1 = model.addPart(partSet)
  28 Part_1_doc = Part_1.document()
  29 model.addParameter(Part_1_doc, "R", "50")
  30 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  31 SketchLine_1 = Sketch_1.addLine(-49.81325699578132, 35.39936274902501, 0, 8.200436015051352)
  32 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
  33 SketchLine_2 = SketchProjection_1.createdFeature()
  34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
  35 SketchLine_3 = Sketch_1.addLine(0, 8.200436015051352, 49.94978427678259, 33.32234621934526)
  36 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
  37 SketchArc_1 = Sketch_1.addArc(0, 31.08202242513997, 49.94978427678259, 33.32234621934526, -49.81325699578132, 35.39936274902501, False)
  38 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
  39 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.endPoint())
  40 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_2.result())
  41 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R")
  42 model.do()
  43 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  44 SketchLine_4 = Sketch_2.addLine(29.74624907439609, 30.07487215963349, 31.08202242513997, 0)
  45 SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchArc_1"), False)
  46 SketchPoint_1 = SketchProjection_2.createdFeature()
  47 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchPoint_1.result())
  48 SketchLine_5 = Sketch_2.addLine(31.08202242513997, 0, 45.45797599933665, 0)
  49 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  50 SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
  51 SketchLine_6 = SketchProjection_3.createdFeature()
  52 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
  53 SketchLine_7 = Sketch_2.addLine(45.45797599933665, 0, 45.83553599350717, -22.747645239555)
  54 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
  55 SketchLine_8 = Sketch_2.addLine(45.83553599350717, -22.747645239555, 70.40999925541598, 30.039147749218)
  56 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  57 SketchLine_9 = Sketch_2.addLine(70.40999925541598, 30.039147749218, 29.74624907439609, 30.07487215963349)
  58 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  59 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_9.endPoint())
  60 model.do()
  61 Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "[Sketch_1/SubEdge&Sketch_1/SketchLine_1][Sketch_1/SubEdge&Sketch_1/SketchLine_3][Sketch_1/SubEdge&Sketch_1/SketchArc_1_2]")])
  62 Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "[Sketch_2/SubEdge&Sketch_2/SketchLine_4][Sketch_2/SubEdge&Sketch_2/SketchLine_5][Sketch_2/SubEdge&Sketch_2/SketchLine_7][Sketch_2/SubEdge&Sketch_2/SketchLine_8][Sketch_2/SubEdge&Sketch_2/SketchLine_9]")])
  63 Fill_1 = model.addFill(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("FACE", "Face_1_1")])
  64 model.do()
  65
  66 model.checkResult(Fill_1, model, 1, [0], [0], [0], [6], [12])
  67 model.testHaveNamingSubshapes(Fill_1, model, Part_1_doc)
  68
  69 model.end()
  70
  71 assert(model.checkPythonDump())