src/FeaturesPlugin/Test/TestFillShellShell.py

   1 ## Copyright (C) 2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21
  22 from SketchAPI import *
  23
  24 from salome.shaper import model
  25
  26 model.begin()
  27 partSet = model.moduleDocument()
  28 Part_1 = model.addPart(partSet)
  29 Part_1_doc = Part_1.document()
  30 model.addParameter(Part_1_doc, "D", "50")
  31 model.addParameter(Part_1_doc, "L", "30")
  32 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  33 SketchLine_1 = Sketch_1.addLine(-10, 32.04672553984553, 15.61552812808831, 47.66225366793383)
  34 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
  35 SketchLine_2 = SketchProjection_1.createdFeature()
  36 SketchLine_3 = Sketch_1.addLine(15.61552812808831, 47.66225366793383, -4.988916520257207e-021, 73.27778179602213)
  37 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
  38 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
  39 SketchLine_4 = Sketch_1.addLine(-4.988916520257207e-021, 73.27778179602213, -25.61552812810082, 57.66225366792627)
  40 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  41 SketchLine_5 = Sketch_1.addLine(-25.61552812810082, 57.66225366792627, -10, 32.04672553984553)
  42 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  43 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
  44 SketchLine_6 = Sketch_1.addLine(-25.61552812810082, 57.66225366792627, 15.61552812808831, 47.66225366793383)
  45 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
  46 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
  47 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
  48 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
  49 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
  50 SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
  51 SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
  52 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
  53 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_5.endPoint(), SketchLine_2.result(), "L/3", True)
  54 model.do()
  55 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  56 SketchLine_7 = Sketch_2.addLine(50, 15.56025031353752, 50, -15.54016280334104)
  57 SketchLine_8 = Sketch_2.addLine(50, -15.54016280334104, 36.52981427174974, 0)
  58 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  59 SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
  60 SketchLine_9 = SketchProjection_2.createdFeature()
  61 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.result())
  62 SketchLine_10 = Sketch_2.addLine(36.52981427174974, 0, 50, 15.56025031353752)
  63 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint())
  64 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_7.startPoint(), SketchLine_10.endPoint())
  65 SketchLine_11 = Sketch_2.addLine(50, 15.56025031353752, 73.27778179602213, 0)
  66 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_7.startPoint(), SketchLine_11.startPoint())
  67 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_4s-SketchLine_3e"), False)
  68 SketchPoint_1 = SketchProjection_3.createdFeature()
  69 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchPoint_1.result())
  70 SketchLine_12 = Sketch_2.addLine(73.27778179602213, 0, 50, -15.54016280334104)
  71 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  72 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_12.endPoint())
  73 SketchConstraintDistance_3 = Sketch_2.setDistance(SketchAPI_Line(SketchLine_9).startPoint(), SketchLine_7.result(), "D", True)
  74 SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_7.result())
  75 model.do()
  76 Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_5f-SketchLine_6r")])
  77 Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_3f-SketchLine_4f-SketchLine_6f")])
  78 Face_3 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_7r-SketchLine_8r-SketchLine_10r")])
  79 Face_4 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_7f-SketchLine_11r-SketchLine_12r")])
  80 Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
  81 Shell_2 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_4_1")])
  82 Boolean_1 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("SHELL", "Shell_2_1")])
  83 model.do()
  84
  85 model.checkResult(Boolean_1, model, 1, [0], [0], [4], [15], [30])
  86 model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
  87
  88 model.end()
  89
  90 assert(model.checkPythonDump())