src/FeaturesPlugin/Test/TestExtrusionCut_ByFaces.py

   1 # Copyright (C) 2014-2022  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(25, 0, 0, 0)
  28 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
  29 SketchPoint_1 = SketchProjection_1.createdFeature()
  30 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchPoint_1.result())
  31 SketchLine_2 = Sketch_1.addLine(0, 0, 0, 200)
  32 SketchLine_3 = Sketch_1.addLine(0, 200, 25, 200)
  33 SketchLine_3.setAuxiliary(True)
  34 SketchLine_4 = Sketch_1.addLine(25, 200, 25, 0)
  35 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  36 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  37 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  38 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  39 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  40 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  41 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  42 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  43 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), 200)
  44 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_1.result(), 25)
  45 SketchLine_5 = Sketch_1.addLine(125, 243.301270189222, -25, 243.3012701892219)
  46 SketchLine_5.setAuxiliary(True)
  47 SketchLine_6 = Sketch_1.addLine(-25, 243.3012701892219, 0, 200)
  48 SketchLine_6.setAuxiliary(True)
  49 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  50 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_6.endPoint())
  51 SketchLine_7 = Sketch_1.addLine(0, 200, 0, 350)
  52 SketchLine_7.setAuxiliary(True)
  53 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_7.startPoint())
  54 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
  55 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_5.result(), SketchLine_7.result())
  56 SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_7.result(), SketchLine_6.result(), 30)
  57 SketchLine_8 = Sketch_1.addLine(-25, 243.3012701892219, 29.37846722219903, 268.6583658936639)
  58 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_8.startPoint())
  59 SketchLine_9 = Sketch_1.addLine(29.37846722219903, 268.6583658936639, 14.58682806127452, 300.3791384399466)
  60 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  61 SketchConstraintPerpendicular_2 = Sketch_1.setPerpendicular(SketchLine_8.result(), SketchLine_9.result())
  62 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_6.result(), 50)
  63 SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 60)
  64 SketchConstraintAngle_2 = Sketch_1.setAngle(SketchLine_5.result(), SketchLine_8.result(), 25)
  65 SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_9.result(), 35)
  66 SketchLine_10 = Sketch_1.addLine(23.03919329608853, 282.2529826992136, 36.18065620811996, 288.3809474944538)
  67 SketchLine_10.setAuxiliary(True)
  68 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_9.result())
  69 SketchLine_11 = Sketch_1.addLine(36.18065620811996, 288.3809474944538, 48.85920406034094, 261.1917138833543)
  70 SketchLine_11.setAuxiliary(True)
  71 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  72 SketchConstraintPerpendicular_3 = Sketch_1.setPerpendicular(SketchLine_10.result(), SketchLine_11.result())
  73 SketchConstraintPerpendicular_4 = Sketch_1.setPerpendicular(SketchLine_9.result(), SketchLine_10.result())
  74 SketchConstraintLength_6 = Sketch_1.setLength(SketchLine_11.result(), 30)
  75 SketchConstraintLength_7 = Sketch_1.setLength(SketchLine_10.result(), 14.5)
  76 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_9.endPoint(), SketchLine_10.startPoint(), 20, True)
  77 SketchArc_1 = Sketch_1.addArc(4.697206021778518, 257.149304782984, 14.58682806127452, 300.3791384399466, 48.85920406034094, 261.1917138833543, True)
  78 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchArc_1.startPoint())
  79 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchArc_1.endPoint())
  80 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchArc_1.results()[1])
  81 SketchArc_2 = Sketch_1.addArc(0.1512256873309691, 256.7331845326764, 48.85920406034094, 261.1917138833543, 34.14802119649147, 221.5683791690064, True)
  82 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchArc_2.startPoint())
  83 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchArc_1.results()[1])
  84 SketchArc_3 = Sketch_1.addArc(-71.98457930083825, 187.3071972226404, 0, 200, -25, 243.3012701892219, False)
  85 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchArc_3.startPoint())
  86 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchArc_3.endPoint())
  87 SketchLine_12 = Sketch_1.addLine(-25, 243.301270189222, 0, 222.3237794097899)
  88 SketchLine_12.setAuxiliary(True)
  89 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_12.startPoint())
  90 SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_7.result())
  91 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_12.result())
  92 SketchConstraintAngle_3 = Sketch_1.setAngle(SketchLine_6.result(), SketchLine_12.result(), 20)
  93 SketchArc_4 = Sketch_1.addArc(55, 200, 34.14802119649147, 221.5683791690064, 25, 200, False)
  94 SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchArc_4.startPoint())
  95 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchArc_4.results()[1])
  96 SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_4.startPoint())
  97 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchLine_4.result(), SketchArc_4.results()[1])
  98 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_4.results()[1], 30)
  99 SketchLine_13 = Sketch_1.addLine(-7.179200577043265, 240.5774662449659, 15.47849409887298, 251.1429227884834)
 100 SketchLine_14 = Sketch_1.addLine(15.47849409887298, 251.1429227884834, 26.04395064239047, 228.4852281125672)
 101 SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
 102 SketchLine_15 = Sketch_1.addLine(26.04395064239047, 228.4852281125672, 3.386255966474217, 217.9197715690497)
 103 SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
 104 SketchLine_16 = Sketch_1.addLine(3.386255966474217, 217.9197715690497, -7.179200577043265, 240.5774662449659)
 105 SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
 106 SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchLine_13.startPoint(), SketchLine_16.endPoint())
 107 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_13.result(), SketchLine_15.result())
 108 SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_16.result(), SketchLine_14.result())
 109 SketchConstraintPerpendicular_5 = Sketch_1.setPerpendicular(SketchLine_13.result(), SketchLine_14.result())
 110 SketchConstraintParallel_3 = Sketch_1.setParallel(SketchLine_13.result(), SketchLine_8.result())
 111 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_15.result(), SketchLine_14.result())
 112 SketchConstraintLength_8 = Sketch_1.setLength(SketchLine_13.result(), 25)
 113 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_8.result(), SketchLine_16.endPoint(), 10, True)
 114 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchArc_3.endPoint(), SketchLine_16.result(), 15, True)
 115 SketchConstraintLength_9 = Sketch_1.setLength(SketchLine_5.result(), 150)
 116 SketchConstraintLength_10 = Sketch_1.setLength(SketchLine_7.result(), 150)
 117 model.do()
 118 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchArc_4_2r-SketchArc_2_2f-SketchArc_1_2f-SketchLine_9r-SketchLine_8r-SketchArc_3_2r-SketchLine_2r-SketchLine_1r-SketchLine_13f-SketchLine_14f-SketchLine_15f-SketchLine_16f")], model.selection(), 10, 0)
 119 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_14"))
 120 SketchLine_17 = Sketch_2.addLine(-221.0712923119171, 10, -196.0712923119172, 0)
 121 SketchLine_17.setAuxiliary(True)
 122 SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_13][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_14][Extrusion_1_1/To_Face]"), False)
 123 SketchPoint_2 = SketchProjection_2.createdFeature()
 124 SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchLine_17.startPoint(), SketchPoint_2.result())
 125 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_14][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_15][Extrusion_1_1/From_Face]"), False)
 126 SketchPoint_3 = SketchProjection_3.createdFeature()
 127 SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchPoint_3.result())
 128 SketchCircle_1 = Sketch_2.addCircle(-208.5712923119172, 5, 4)
 129 SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchLine_17.result(), SketchCircle_1.center())
 130 SketchConstraintMiddle_1 = Sketch_2.setMiddlePoint(SketchCircle_1.center(), SketchLine_17.result())
 131 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_1.results()[1], 4)
 132 model.do()
 133 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2f_wire")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2"), 0, model.selection(), 5, [model.selection("SOLID", "Extrusion_1_1")])
 134 model.do()
 135
 136 from GeomAPI import GeomAPI_Shape
 137
 138 model.testNbResults(ExtrusionCut_1, 1)
 139 model.testNbSubResults(ExtrusionCut_1, [0])
 140 model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.SOLID, [1])
 141 model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.FACE, [18])
 142 model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.EDGE, [90])
 143 model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.VERTEX, [180])
 144 model.testResultsVolumes(ExtrusionCut_1, [78707.15553129233])
 145
 146 model.testHaveNamingSubshapes(ExtrusionCut_1, model, Part_1_doc)
 147
 148 model.end()
 149
 150 assert(model.checkPythonDump())