src/FeaturesPlugin/Test/TestBooleanSmash_SolidsHistory.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 # Test that the history of Smash operation works correctly after movement of groups after this Smash feature
  22
  23 # -*- coding: utf-8 -*-
  24
  25 from salome.shaper import model
  26 from ModelAPI import *
  27 from GeomAPI import *
  28
  29 model.begin()
  30 partSet = model.moduleDocument()
  31 Part_1 = model.addPart(partSet)
  32 Part_1_doc = Part_1.document()
  33 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  34 SketchLine_1 = Sketch_1.addLine(26.49384236453203, 25.42805779478775, -23.25985221674878, 25.42805779478775)
  35 SketchLine_2 = Sketch_1.addLine(-23.25985221674878, 25.42805779478775, -23.25985221674878, -22.79086009461325)
  36 SketchLine_3 = Sketch_1.addLine(-23.25985221674878, -22.79086009461325, 26.49384236453203, -22.79086009461325)
  37 SketchLine_4 = Sketch_1.addLine(26.49384236453203, -22.79086009461325, 26.49384236453203, 25.42805779478775)
  38 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  39 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  40 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  41 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  42 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  43 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  44 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  45 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  46 SketchLine_5 = Sketch_1.addLine(-23.25985221674878, -22.79086009461325, -4.602216748768477, 25.42805779478775)
  47 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_5.startPoint())
  48 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_1.result())
  49 SketchLine_6 = Sketch_1.addLine(-4.602216748768477, 25.42805779478775, 8.458128078817737, -22.79086009461324)
  50 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  51 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_3.result())
  52 SketchLine_7 = Sketch_1.addLine(8.458128078817737, -22.79086009461324, 26.49384236453203, 25.42805779478775)
  53 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  54 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_7.endPoint())
  55 model.do()
  56 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  57 SketchLine_8 = Sketch_2.addLine(38.18596059113301, 15.79679802955666, -30.91800131851275, 15.79679802955666)
  58 SketchLine_9 = Sketch_2.addLine(-30.91800131851275, 15.79679802955666, -30.91800131851275, -10.07512315270936)
  59 SketchLine_10 = Sketch_2.addLine(-30.91800131851275, -10.07512315270936, 38.18596059113301, -10.07512315270936)
  60 SketchLine_11 = Sketch_2.addLine(38.18596059113301, -10.07512315270936, 38.18596059113301, 15.79679802955666)
  61 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_8.startPoint())
  62 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  63 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  64 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  65 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_8.result())
  66 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_9.result())
  67 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_10.result())
  68 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_11.result())
  69 SketchLine_12 = Sketch_2.addLine(38.18596059113301, 15.79679802955666, -30.91800131851275, 1.368226600985215)
  70 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_12.startPoint())
  71 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.result())
  72 SketchLine_13 = Sketch_2.addLine(-30.91800131851275, 1.368226600985215, 38.18596059113301, -10.07512315270936)
  73 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  74 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_13.endPoint())
  75 model.do()
  76 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "all-in-Sketch_1")], model.selection(), 10, 0)
  77 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "all-in-Sketch_2")], model.selection(), 5, 5)
  78 Group_1_objects = [model.selection("SOLID", "Extrusion_1_1_1"), model.selection("SOLID", "Extrusion_1_1_4"), model.selection("SOLID", "Extrusion_1_1_2"), model.selection("SOLID", "Extrusion_1_1_3")]
  79 Group_1 = model.addGroup(Part_1_doc, Group_1_objects)
  80 Group_2_objects = [model.selection("SOLID", "Extrusion_2_1_2"), model.selection("SOLID", "Extrusion_2_1_3"), model.selection("SOLID", "Extrusion_2_1_1")]
  81 Group_2 = model.addGroup(Part_1_doc, Group_2_objects)
  82 Group_3_objects = [model.selection("FACE", "Extrusion_1_1_4/From_Face"), model.selection("FACE", "Extrusion_1_1_2/From_Face"), model.selection("FACE", "Extrusion_1_1_4/Generated_Face&Sketch_1/SketchLine_3"), model.selection("FACE", "Extrusion_1_1_2/Generated_Face&Sketch_1/SketchLine_1"), model.selection("FACE", "Extrusion_1_1_4/To_Face"), model.selection("FACE", "Extrusion_1_1_2/To_Face")]
  83 Group_3 = model.addGroup(Part_1_doc, Group_3_objects)
  84 Group_4_objects = [model.selection("FACE", "Extrusion_2_1_2/To_Face"), model.selection("FACE", "Extrusion_2_1_3/To_Face"), model.selection("FACE", "Extrusion_2_1_1/To_Face")]
  85 Group_4 = model.addGroup(Part_1_doc, Group_4_objects)
  86 Smash_1_objects_1 = [model.selection("SOLID", "Extrusion_1_1_1"), model.selection("SOLID", "Extrusion_1_1_4"), model.selection("SOLID", "Extrusion_1_1_2")]
  87 Smash_1 = model.addSmash(Part_1_doc, Smash_1_objects_1, [model.selection("SOLID", "Extrusion_2_1_1"), model.selection("SOLID", "Extrusion_2_1_2")])
  88 model.do()
  89 # move groups after the Smash
  90 Part_1_doc.moveFeature(Group_1.feature(), Smash_1.feature())
  91 Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
  92 Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
  93 Part_1_doc.moveFeature(Group_4.feature(), Group_3.feature())
  94 model.end()
  95
  96 # check groups are correct
  97 aFactory = ModelAPI_Session.get().validators()
  98 selectionList = Group_1.feature().selectionList("group_list")
  99 assert(selectionList.size() == 4)
 100 assert(aFactory.validate(Group_1.feature()))
 101 for i in range(4):
 102   assert(Group_1.groupList().value(i).value().shapeType() == GeomAPI_Shape.SOLID)
 103
 104 selectionList = Group_2.feature().selectionList("group_list")
 105 assert(selectionList.size() == 2)
 106 assert(aFactory.validate(Group_2.feature()))
 107 for i in range(2):
 108   assert(Group_2.groupList().value(i).value().shapeType() == GeomAPI_Shape.SOLID)
 109
 110 selectionList = Group_3.feature().selectionList("group_list")
 111 assert(selectionList.size() == 10)
 112 assert(aFactory.validate(Group_3.feature()))
 113 for i in range(10):
 114   assert(Group_3.groupList().value(i).value().shapeType() == GeomAPI_Shape.FACE)
 115
 116 selectionList = Group_4.feature().selectionList("group_list")
 117 assert(selectionList.size() == 10)
 118 assert(aFactory.validate(Group_4.feature()))
 119 for i in range(10):
 120   assert(Group_4.groupList().value(i).value().shapeType() == GeomAPI_Shape.FACE)
 121
 122 assert(model.checkPythonDump())