src/FeaturesPlugin/Test/TestBooleanFuse_ShellCompound_ShellCompound.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(-83.2865672209026, 26.7937406175772, -53.58748123515441, 47.45397434679335)
  28 SketchLine_2 = Sketch_1.addLine(-53.58748123515441, 47.45397434679335, -26.47092446555818, 25.50247600950118)
  29 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  30 SketchLine_3 = Sketch_1.addLine(-26.47092446555818, 25.50247600950118, -53.58748123515441, 5.487874584323028)
  31 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  32 SketchLine_4 = Sketch_1.addLine(-53.58748123515441, 5.487874584323028, -83.2865672209026, 26.7937406175772)
  33 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  34 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
  35 SketchLine_5 = Sketch_1.addLine(-53.58748123515441, 47.45397434679335, -53.58748123515441, 5.487874584323028)
  36 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_5.startPoint())
  37 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_5.endPoint())
  38 SketchLine_6 = Sketch_1.addLine(24.53402755344418, 35.83259287410926, 55.52437814726837, 51.32776817102136)
  39 SketchLine_7 = Sketch_1.addLine(55.52437814726837, 51.32776817102136, 87.16036104513063, 32.60443135391922)
  40 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  41 SketchLine_8 = Sketch_1.addLine(87.16036104513063, 32.60443135391922, 53.58748123515437, 16.46362375296911)
  42 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  43 SketchLine_9 = Sketch_1.addLine(53.58748123515437, 16.46362375296911, 24.53402755344418, 35.83259287410926)
  44 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  45 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_9.endPoint())
  46 SketchLine_10 = Sketch_1.addLine(55.52437814726837, 51.32776817102136, 53.58748123515437, 16.46362375296911)
  47 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_10.startPoint())
  48 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_10.endPoint())
  49 model.do()
  50 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  51 SketchLine_11 = Sketch_2.addLine(-85.86909643705464, 4.842242280285022, -62.62633349168645, 26.7937406175772)
  52 SketchLine_12 = Sketch_2.addLine(-62.62633349168645, 26.7937406175772, -65.20886270783846, -2.259713064133024)
  53 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  54 SketchLine_13 = Sketch_2.addLine(-65.20886270783846, -2.259713064133024, -83.9321995249406, -14.52672684085511)
  55 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  56 SketchLine_14 = Sketch_2.addLine(-83.9321995249406, -14.52672684085511, -85.86909643705464, 4.842242280285022)
  57 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  58 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_14.endPoint())
  59 SketchLine_15 = Sketch_2.addLine(-85.86909643705464, 4.842242280285022, -65.20886270783846, -2.259713064133024)
  60 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_15.startPoint())
  61 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_15.endPoint())
  62 SketchLine_16 = Sketch_2.addLine(31.63598289786226, 11.9441976247031, 44.54862897862235, 33.25006365795723)
  63 SketchLine_17 = Sketch_2.addLine(44.54862897862235, 33.25006365795723, 52.29621662707837, 8.070403800475056)
  64 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
  65 SketchLine_18 = Sketch_2.addLine(52.29621662707837, 8.070403800475056, 32.28161520190027, -12.58982992874109)
  66 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
  67 SketchLine_19 = Sketch_2.addLine(32.28161520190027, -12.58982992874109, 31.63598289786226, 11.9441976247031)
  68 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
  69 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_19.endPoint())
  70 SketchLine_20 = Sketch_2.addLine(31.63598289786226, 11.9441976247031, 52.29621662707837, 8.070403800475056)
  71 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_20.startPoint())
  72 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_20.endPoint())
  73 model.do()
  74 Shell_1_objects = [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_5r-SketchLine_1r"), model.selection("FACE", "Sketch_1/Face-SketchLine_5f-SketchLine_3r-SketchLine_2r"), model.selection("FACE", "Sketch_1/Face-SketchLine_9r-SketchLine_10r-SketchLine_6r"), model.selection("FACE", "Sketch_1/Face-SketchLine_10f-SketchLine_8r-SketchLine_7r"), model.selection("FACE", "Sketch_2/Face-SketchLine_15f-SketchLine_12r-SketchLine_11r"), model.selection("FACE", "Sketch_2/Face-SketchLine_15r-SketchLine_14r-SketchLine_13r"), model.selection("FACE", "Sketch_2/Face-SketchLine_20f-SketchLine_17r-SketchLine_16r"), model.selection("FACE", "Sketch_2/Face-SketchLine_20r-SketchLine_19r-SketchLine_18r")]
  75 Shell_1 = model.addShell(Part_1_doc, Shell_1_objects)
  76 Compound_1 = model.addCompound(Part_1_doc, [model.selection("SHELL", "Shell_1_1"), model.selection("SHELL", "Shell_1_2")])
  77 Compound_2 = model.addCompound(Part_1_doc, [model.selection("SHELL", "Shell_1_3"), model.selection("SHELL", "Shell_1_4")])
  78 Fuse_1 = model.addFuse(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
  79 model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
  80 model.do()
  81 model.end()
  82
  83 from GeomAPI import  GeomAPI_Shape
  84
  85 model.testNbResults(Fuse_1, 1)
  86 model.testNbSubResults(Fuse_1, [4])
  87 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [0])
  88 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [12])
  89 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [44])
  90 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [88])
  91
  92 assert(model.checkPythonDump())