src/FeaturesPlugin/Test/TestBooleanFuse_CompSolid_CompSolid.py

   1 # Copyright (C) 2014-2022  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(-87.19866468842729, 38.44668397626113, -52.3191988130564, 59.05727744807122)
  28 SketchLine_2 = Sketch_1.addLine(-52.3191988130564, 59.05727744807122, -10.30529673590503, 36.86125370919882)
  29 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  30 SketchLine_3 = Sketch_1.addLine(-10.30529673590503, 36.86125370919882, -59.45363501483681, 10.70165430267062)
  31 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  32 SketchLine_4 = Sketch_1.addLine(-59.45363501483681, 10.70165430267062, -87.19866468842729, 38.44668397626113)
  33 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  34 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
  35 SketchLine_5 = Sketch_1.addLine(-52.3191988130564, 59.05727744807122, -59.45363501483681, 10.70165430267062)
  36 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_5.startPoint())
  37 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_5.endPoint())
  38 model.do()
  39 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  40 SketchLine_6 = Sketch_2.addLine(-44.00943641618498, -5.404667630057807, -42.4652456647399, 37.06057803468208)
  41 SketchLine_7 = Sketch_2.addLine(-42.4652456647399, 37.06057803468208, -11.58143063583817, 13.12562138728323)
  42 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  43 SketchLine_8 = Sketch_2.addLine(-11.58143063583817, 13.12562138728323, -16.2140028901734, -17.75819364161849)
  44 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  45 SketchLine_9 = Sketch_2.addLine(-16.2140028901734, -17.75819364161849, -44.00943641618498, -5.404667630057807)
  46 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  47 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_6.startPoint(), SketchLine_9.endPoint())
  48 SketchLine_10 = Sketch_2.addLine(-44.00943641618498, -5.404667630057807, -11.58143063583817, 13.12562138728323)
  49 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_6.startPoint(), SketchLine_10.startPoint())
  50 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_10.endPoint())
  51 model.do()
  52 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1"), model.selection("COMPOUND", "Sketch_2")], model.selection(), 10, 0)
  53 Fuse_1 = model.addFuse(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("COMPSOLID", "Extrusion_1_2")], True)
  54 model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
  55 model.do()
  56 model.end()
  57
  58 from GeomAPI import  GeomAPI_Shape
  59
  60 model.testNbResults(Fuse_1, 1)
  61 model.testNbSubResults(Fuse_1, [1])
  62 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [1])
  63 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [11])
  64 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [54])
  65 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [108])
  66
  67 assert(model.checkPythonDump())