src/FeaturesPlugin/Test/TestBooleanFuse_CompSolidCompound_CompSolidCompound.py

   1 # Copyright (C) 2014-2021  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(-81.42367066895368, 33.08919382504288, -49.89365351629502, 58.72898799313894)
  28 SketchLine_2 = Sketch_1.addLine(-49.89365351629502, 58.72898799313894, -14.89879931389364, 32.04974271012008)
  29 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  30 SketchLine_3 = Sketch_1.addLine(-14.89879931389364, 32.04974271012008, -45.04288164665522, 2.598627787307022)
  31 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  32 SketchLine_4 = Sketch_1.addLine(-45.04288164665522, 2.598627787307022, -81.42367066895368, 33.08919382504288)
  33 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  34 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
  35 SketchLine_5 = Sketch_1.addLine(-49.89365351629502, 58.72898799313894, -45.04288164665522, 2.598627787307022)
  36 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_5.startPoint())
  37 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_5.endPoint())
  38 SketchLine_6 = Sketch_1.addLine(40.88507718696397, 37.93996569468268, 70.33619210977699, 65.31217838765009)
  39 SketchLine_7 = Sketch_1.addLine(70.33619210977699, 65.31217838765009, 91.81818181818181, 33.43567753001717)
  40 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  41 SketchLine_8 = Sketch_1.addLine(91.81818181818181, 33.43567753001717, 59.24871355060034, 6.756432246998279)
  42 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  43 SketchLine_9 = Sketch_1.addLine(59.24871355060034, 6.756432246998279, 40.88507718696397, 37.93996569468268)
  44 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  45 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_9.endPoint())
  46 SketchLine_10 = Sketch_1.addLine(70.33619210977699, 65.31217838765009, 59.24871355060034, 6.756432246998279)
  47 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_10.startPoint())
  48 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_10.endPoint())
  49 model.do()
  50 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  51 SketchLine_11 = Sketch_2.addLine(-24.25385934819896, -5.370497427101204, -36.03430531732418, 28.93138936535163)
  52 SketchLine_12 = Sketch_2.addLine(-36.03430531732418, 28.93138936535163, -6.23670668953688, 16.80445969125213)
  53 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  54 SketchLine_13 = Sketch_2.addLine(-6.23670668953688, 16.80445969125213, -4.850771869639785, -14.37907375643225)
  55 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  56 SketchLine_14 = Sketch_2.addLine(-4.850771869639785, -14.37907375643225, -24.25385934819896, -5.370497427101204)
  57 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  58 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_14.endPoint())
  59 SketchLine_15 = Sketch_2.addLine(-24.25385934819896, -5.370497427101204, -6.23670668953688, 16.80445969125213)
  60 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_15.startPoint())
  61 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_15.endPoint())
  62 SketchLine_16 = Sketch_2.addLine(32.22298456260721, 12.30017152658662, 55.78387650085761, 33.78216123499142)
  63 SketchLine_17 = Sketch_2.addLine(55.78387650085761, 33.78216123499142, 51.27958833619211, 2.252144082332767)
  64 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
  65 SketchLine_18 = Sketch_2.addLine(51.27958833619211, 2.252144082332767, 27.71869639794167, -15.41852487135506)
  66 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
  67 SketchLine_19 = Sketch_2.addLine(27.71869639794167, -15.41852487135506, 32.22298456260721, 12.30017152658662)
  68 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
  69 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_19.endPoint())
  70 SketchLine_20 = Sketch_2.addLine(32.22298456260721, 12.30017152658662, 51.27958833619211, 2.252144082332767)
  71 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_20.startPoint())
  72 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_20.endPoint())
  73 model.do()
  74 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 100, 0)
  75 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 50, -20)
  76 Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_2"), model.selection("COMPSOLID", "Extrusion_1_1")])
  77 Compound_2 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_2_2"), model.selection("COMPSOLID", "Extrusion_2_1")])
  78 Fuse_1 = model.addFuse(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")], True)
  79 model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
  80 model.do()
  81 model.end()
  82
  83 from GeomAPI import  GeomAPI_Shape
  84
  85 model.testNbResults(Fuse_1, 1)
  86 model.testNbSubResults(Fuse_1, [2])
  87 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [2])
  88 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [24])
  89 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [108])
  90 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [216])
  91
  92 assert(model.checkPythonDump())