src/FeaturesPlugin/Test/TestBooleanCut_Solid_Solid.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(15.58517034068135, 30.56312625250501, -33.39679358717434, 30.56312625250501)
  29 SketchLine_1.result().setColor(225, 0, 0)
  30 SketchLine_2 = Sketch_1.addLine(-33.39679358717434, 30.56312625250501, -33.39679358717434, -16.39478957915832)
  31 SketchLine_2.result().setColor(225, 0, 0)
  32 SketchLine_3 = Sketch_1.addLine(-33.39679358717434, -16.39478957915832, 15.58517034068135, -16.39478957915832)
  33 SketchLine_3.result().setColor(225, 0, 0)
  34 SketchLine_4 = Sketch_1.addLine(15.58517034068135, -16.39478957915832, 15.58517034068135, 30.56312625250501)
  35 SketchLine_4.result().setColor(225, 0, 0)
  36 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  37 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  38 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  39 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  40 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  41 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  42 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  43 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  44 model.do()
  45 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  46 SketchLine_5 = Sketch_2.addLine(35.01603206412826, 45.13627254509017, -8.298597194388776, 45.13627254509017)
  47 SketchLine_5.result().setColor(225, 0, 0)
  48 SketchLine_6 = Sketch_2.addLine(-8.298597194388776, 45.13627254509017, -8.298597194388776, 6.679358717434865)
  49 SketchLine_6.result().setColor(225, 0, 0)
  50 SketchLine_7 = Sketch_2.addLine(-8.298597194388776, 6.679358717434865, 35.01603206412826, 6.679358717434865)
  51 SketchLine_7.result().setColor(225, 0, 0)
  52 SketchLine_8 = Sketch_2.addLine(35.01603206412826, 6.679358717434865, 35.01603206412826, 45.13627254509017)
  53 SketchLine_8.result().setColor(225, 0, 0)
  54 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  55 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  56 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  57 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  58 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_5.result())
  59 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_6.result())
  60 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_7.result())
  61 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
  62 model.do()
  63 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1"), model.selection("COMPOUND", "Sketch_2")], model.selection(), 100, 0)
  64 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_1_2")])
  65 model.testHaveNamingSubshapes(Cut_1, model, Part_1_doc)
  66 model.do()
  67 model.end()
  68
  69 from GeomAPI import  GeomAPI_Shape
  70
  71 model.testNbResults(Cut_1, 1)
  72 model.testNbSubResults(Cut_1, [0])
  73 model.testNbSubShapes(Cut_1, GeomAPI_Shape.SOLID, [1])
  74 model.testNbSubShapes(Cut_1, GeomAPI_Shape.FACE, [8])
  75 model.testNbSubShapes(Cut_1, GeomAPI_Shape.EDGE, [36])
  76 model.testNbSubShapes(Cut_1, GeomAPI_Shape.VERTEX, [72])
  77
  78 assert(model.checkPythonDump())