src/FeaturesPlugin/Test/TestBooleanCut_CompSolidCompound_CompSolidCompound.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchCircle_1 = Sketch_1.addCircle(-65.75962883650391, 1.812165175943577, 20.84344758927215)
  29 SketchCircle_1.result().setColor(225, 0, 0)
  30 SketchCircle_1.results()[1].setColor(225, 0, 0)
  31 SketchLine_1 = Sketch_1.addLine(-64.98081644495703, 22.64105757725738, -64.58019600110421, -18.99788637597517)
  32 SketchLine_1.result().setColor(225, 0, 0)
  33 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchCircle_1.results()[1])
  34 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchCircle_1.results()[1])
  35 SketchCircle_2 = Sketch_1.addCircle(62.53870966583226, 1.604010602289747, 23.75523331537361)
  36 SketchCircle_2.result().setColor(225, 0, 0)
  37 SketchCircle_2.results()[1].setColor(225, 0, 0)
  38 SketchLine_2 = Sketch_1.addLine(63.75890236666707, 25.3278854890081, 63.76050419996562, -22.11978184293701)
  39 SketchLine_2.result().setColor(225, 0, 0)
  40 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchCircle_2.results()[1])
  41 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchCircle_2.results()[1])
  42 model.do()
  43 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  44 SketchCircle_3 = Sketch_2.addCircle(-32.47294132465983, 2.220594155120791, 24.592292084386)
  45 SketchCircle_3.result().setColor(225, 0, 0)
  46 SketchCircle_3.results()[1].setColor(225, 0, 0)
  47 SketchLine_3 = Sketch_2.addLine(-57.05151402373072, 3.041930894979393, -7.893787575150295, 1.41683366733466)
  48 SketchLine_3.result().setColor(225, 0, 0)
  49 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_3.startPoint(), SketchCircle_3.results()[1])
  50 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchCircle_3.results()[1])
  51 SketchCircle_4 = Sketch_2.addCircle(107.0005131452338, 2.231606536656211, 32.56614591098422)
  52 SketchCircle_4.result().setColor(225, 0, 0)
  53 SketchCircle_4.results()[1].setColor(225, 0, 0)
  54 SketchLine_4 = Sketch_2.addLine(74.45658844157124, 3.434446666454839, 139.5031967571015, 0.1995097076777023)
  55 SketchLine_4.result().setColor(225, 0, 0)
  56 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchCircle_4.results()[1])
  57 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchCircle_4.results()[1])
  58 model.do()
  59 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 0)
  60 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 20, 20)
  61 Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("COMPSOLID", "Extrusion_1_2")])
  62 Compound_2 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_2_1"), model.selection("COMPSOLID", "Extrusion_2_2")])
  63 Cut_1 = model.addCut(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1")], [model.selection("COMPOUND", "Compound_2_1")])
  64 model.testHaveNamingSubshapes(Cut_1, model, Part_1_doc)
  65 model.do()
  66 model.end()
  67
  68 from GeomAPI import  GeomAPI_Shape
  69
  70 model.testNbResults(Cut_1, 1)
  71 model.testNbSubResults(Cut_1, [2])
  72 model.testNbSubShapes(Cut_1, GeomAPI_Shape.SOLID, [4])
  73 model.testNbSubShapes(Cut_1, GeomAPI_Shape.FACE, [22])
  74 model.testNbSubShapes(Cut_1, GeomAPI_Shape.EDGE, [84])
  75 model.testNbSubShapes(Cut_1, GeomAPI_Shape.VERTEX, [168])
  76
  77 assert(model.checkPythonDump())