src/FeaturesPlugin/Test/TestBooleanCommon_SolidCompound_SolidCompound.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(-10.72745490981964, 42.70741482965933, -40.27855711422846, 42.70741482965933)
  29 SketchLine_2 = Sketch_1.addLine(-40.27855711422846, 42.70741482965933, -40.27855711422846, 9.513026052104207)
  30 SketchLine_3 = Sketch_1.addLine(-40.27855711422846, 9.513026052104207, -10.72745490981964, 9.513026052104207)
  31 SketchLine_4 = Sketch_1.addLine(-10.72745490981964, 9.513026052104207, -10.72745490981964, 42.70741482965933)
  32 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  34 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  35 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  36 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  37 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  38 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  39 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  40 SketchLine_5 = Sketch_1.addLine(51.61322645290581, 42.70741482965933, 15.98997995991983, 42.70741482965933)
  41 SketchLine_6 = Sketch_1.addLine(15.98997995991983, 42.70741482965933, 15.98997995991983, 8.298597194388774)
  42 SketchLine_7 = Sketch_1.addLine(15.98997995991983, 8.298597194388774, 51.61322645290581, 8.298597194388774)
  43 SketchLine_8 = Sketch_1.addLine(51.61322645290581, 8.298597194388774, 51.61322645290581, 42.70741482965933)
  44 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  45 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  46 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  47 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  48 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
  49 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
  50 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
  51 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
  52 model.do()
  53 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  54 SketchLine_9 = Sketch_2.addLine(-17.20440881763527, 19.22845691382766, -33.80160320641282, 19.22845691382766)
  55 SketchLine_10 = Sketch_2.addLine(-33.80160320641282, 19.22845691382766, -33.80160320641282, -6.679358717434865)
  56 SketchLine_11 = Sketch_2.addLine(-33.80160320641282, -6.679358717434865, -17.20440881763527, -6.679358717434865)
  57 SketchLine_12 = Sketch_2.addLine(-17.20440881763527, -6.679358717434865, -17.20440881763527, 19.22845691382766)
  58 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
  59 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  60 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  61 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  62 SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_9.result())
  63 SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_10.result())
  64 SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_11.result())
  65 SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_12.result())
  66 SketchLine_13 = Sketch_2.addLine(41.4929859719439, 21.25250501002005, 26.51503006012023, 21.25250501002005)
  67 SketchLine_14 = Sketch_2.addLine(26.51503006012023, 21.25250501002005, 26.51503006012023, -9.917835671342685)
  68 SketchLine_15 = Sketch_2.addLine(26.51503006012023, -9.917835671342685, 41.4929859719439, -9.917835671342685)
  69 SketchLine_16 = Sketch_2.addLine(41.4929859719439, -9.917835671342685, 41.4929859719439, 21.25250501002005)
  70 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_13.startPoint())
  71 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  72 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
  73 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
  74 SketchConstraintHorizontal_7 = Sketch_2.setHorizontal(SketchLine_13.result())
  75 SketchConstraintVertical_7 = Sketch_2.setVertical(SketchLine_14.result())
  76 SketchConstraintHorizontal_8 = Sketch_2.setHorizontal(SketchLine_15.result())
  77 SketchConstraintVertical_8 = Sketch_2.setVertical(SketchLine_16.result())
  78 model.do()
  79 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
  80 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 5, 5)
  81 Compound_1 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
  82 Compound_2 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")])
  83 Common_1 = model.addCommon(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
  84 model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
  85 model.do()
  86 model.end()
  87
  88 from GeomAPI import  GeomAPI_Shape
  89
  90 model.testNbResults(Common_1, 1)
  91 model.testNbSubResults(Common_1, [2])
  92 model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [2])
  93 model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [12])
  94 model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [48])
  95 model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [96])
  96
  97 assert(model.checkPythonDump())