src/FeaturesPlugin/Test/TestBooleanCommon_SolidCompound_Shell.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(-29.34869739478959, 31.37274549098196, -65.37675350701403, 31.37274549098196)
  29 SketchLine_1.result().setColor(225, 0, 0)
  30 SketchLine_2 = Sketch_1.addLine(-65.37675350701403, 31.37274549098196, -65.37675350701403, -6.274549098196388)
  31 SketchLine_2.result().setColor(225, 0, 0)
  32 SketchLine_3 = Sketch_1.addLine(-65.37675350701403, -6.274549098196388, -29.34869739478959, -6.274549098196388)
  33 SketchLine_3.result().setColor(225, 0, 0)
  34 SketchLine_4 = Sketch_1.addLine(-29.34869739478959, -6.274549098196388, -29.34869739478959, 31.37274549098196)
  35 SketchLine_4.result().setColor(225, 0, 0)
  36 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  37 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  38 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  39 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  40 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  41 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  42 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  43 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  44 SketchLine_5 = Sketch_1.addLine(41.08817635270542, 32.5871743486974, 11.5370741482966, 32.5871743486974)
  45 SketchLine_5.result().setColor(225, 0, 0)
  46 SketchLine_6 = Sketch_1.addLine(11.5370741482966, 32.5871743486974, 11.5370741482966, -8.703406813627252)
  47 SketchLine_6.result().setColor(225, 0, 0)
  48 SketchLine_7 = Sketch_1.addLine(11.5370741482966, -8.703406813627252, 41.08817635270542, -8.703406813627252)
  49 SketchLine_7.result().setColor(225, 0, 0)
  50 SketchLine_8 = Sketch_1.addLine(41.08817635270542, -8.703406813627252, 41.08817635270542, 32.5871743486974)
  51 SketchLine_8.result().setColor(225, 0, 0)
  52 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  53 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  54 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  55 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  56 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
  57 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
  58 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
  59 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
  60 model.do()
  61 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  62 SketchLine_9 = Sketch_2.addLine(-36.83851213815001, 4.871192068212162, -37.23534778672252, 23.01200273357838)
  63 SketchLine_9.result().setColor(225, 0, 0)
  64 SketchLine_10 = Sketch_2.addLine(-37.23534778672252, 23.01200273357838, -8.095368404429529, 22.8820142517576)
  65 SketchLine_10.result().setColor(225, 0, 0)
  66 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  67 SketchLine_11 = Sketch_2.addLine(-8.095368404429529, 22.8820142517576, 20.86605178109317, 22.08563377543123)
  68 SketchLine_11.result().setColor(225, 0, 0)
  69 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  70 SketchLine_12 = Sketch_2.addLine(20.86605178109317, 22.08563377543123, 22.14286343998464, -2.004860047909258)
  71 SketchLine_12.result().setColor(225, 0, 0)
  72 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  73 SketchLine_13 = Sketch_2.addLine(22.14286343998464, -2.004860047909258, -4.857114760245733, -1.198368777231491)
  74 SketchLine_13.result().setColor(225, 0, 0)
  75 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  76 SketchLine_14 = Sketch_2.addLine(-4.857114760245733, -1.198368777231491, -36.83851213815001, 4.871192068212162)
  77 SketchLine_14.result().setColor(225, 0, 0)
  78 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  79 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_9.startPoint(), SketchLine_14.endPoint())
  80 SketchLine_15 = Sketch_2.addLine(-4.857114760245733, -1.198368777231491, -8.095368404429529, 22.8820142517576)
  81 SketchLine_15.result().setColor(225, 0, 0)
  82 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_15.startPoint())
  83 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_15.endPoint())
  84 model.do()
  85 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
  86 Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_9r-SketchLine_10r-SketchLine_14r-SketchLine_15f"), model.selection("FACE", "Sketch_2/Face-SketchLine_11r-SketchLine_12r-SketchLine_13r-SketchLine_15r")])
  87 Compound_1 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
  88 Common_1 = model.addCommon(Part_1_doc, [model.selection("SHELL", "Shell_1_1"), model.selection("COMPOUND", "Compound_1_1")])
  89 model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
  90 model.do()
  91 model.end()
  92
  93 from GeomAPI import  GeomAPI_Shape
  94
  95 model.testNbResults(Common_1, 1)
  96 model.testNbSubResults(Common_1, [2])
  97 model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
  98 model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [2])
  99 model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [8])
 100 model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [16])
 101
 102 assert(model.checkPythonDump())