src/FeaturesPlugin/Test/TestBooleanCommon_SolidCompound_Face.py

   1 # Copyright (C) 2014-2019  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(-8.142167372244474, 30.79863310370742, -42.12686596943888, 30.79863310370742)
  28 SketchLine_2 = Sketch_1.addLine(-42.12686596943888, 30.79863310370742, -42.12686596943888, -6.018123709919844)
  29 SketchLine_3 = Sketch_1.addLine(-42.12686596943888, -6.018123709919844, -8.142167372244474, -6.018123709919844)
  30 SketchLine_4 = Sketch_1.addLine(-8.142167372244474, -6.018123709919844, -8.142167372244474, 30.79863310370742)
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  33 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  34 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  35 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  36 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  37 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  38 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  39 SketchLine_5 = Sketch_1.addLine(49.91502606462924, 30.79863310370742, 15.22231291332662, 30.79863310370742)
  40 SketchLine_6 = Sketch_1.addLine(15.22231291332662, 30.79863310370742, 15.22231291332662, -5.310109155811627)
  41 SketchLine_7 = Sketch_1.addLine(15.22231291332662, -5.310109155811627, 49.91502606462924, -5.310109155811627)
  42 SketchLine_8 = Sketch_1.addLine(49.91502606462924, -5.310109155811627, 49.91502606462924, 30.79863310370742)
  43 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  44 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  45 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  46 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  47 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
  48 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
  49 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
  50 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
  51 model.do()
  52 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
  53 Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
  54 SketchLine_9 = Sketch_2.addLine(32.99903071986655, 54.47604223124301, -21.74338409862735, 54.47604223124301)
  55 SketchLine_10 = Sketch_2.addLine(-21.74338409862735, 54.47604223124301, -21.74338409862735, -10.16156298864041)
  56 SketchLine_11 = Sketch_2.addLine(-21.74338409862735, -10.16156298864041, 32.99903071986655, -10.16156298864041)
  57 SketchLine_12 = Sketch_2.addLine(32.99903071986655, -10.16156298864041, 32.99903071986655, 54.47604223124301)
  58 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
  59 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  60 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  61 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  62 SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_9.result())
  63 SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_10.result())
  64 SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_11.result())
  65 SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_12.result())
  66 model.do()
  67 Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_9r-SketchLine_10f-SketchLine_11f-SketchLine_12f")])
  68 Compound_1 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_1")])
  69 Common_1 = model.addCommon(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("COMPOUND", "Compound_1_1")])
  70 model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
  71 model.do()
  72 model.end()
  73
  74 from GeomAPI import  GeomAPI_Shape
  75
  76 model.testNbResults(Common_1, 1)
  77 model.testNbSubResults(Common_1, [2])
  78 model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
  79 model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [2])
  80 model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [8])
  81 model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [16])
  82
  83 assert(model.checkPythonDump())