src/FeaturesPlugin/Test/TestBooleanCommon_Face_Face.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(24.08617234468939, 57.68537074148297, -74.28256513026052, 57.68537074148297)
  29 SketchLine_2 = Sketch_1.addLine(-74.28256513026052, 57.68537074148297, -74.28256513026052, 13.96593186372746)
  30 SketchLine_3 = Sketch_1.addLine(-74.28256513026052, 13.96593186372746, 24.08617234468939, 13.96593186372746)
  31 SketchLine_4 = Sketch_1.addLine(24.08617234468939, 13.96593186372746, 24.08617234468939, 57.68537074148297)
  32 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  34 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  35 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  36 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  37 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  38 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  39 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  40 model.do()
  41 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  42 SketchLine_5 = Sketch_2.addLine(-6.679358717434877, 28.9438877755511, -34.20641282565131, 28.9438877755511)
  43 SketchLine_6 = Sketch_2.addLine(-34.20641282565131, 28.9438877755511, -34.20641282565131, -14.37074148296594)
  44 SketchLine_7 = Sketch_2.addLine(-34.20641282565131, -14.37074148296594, -6.679358717434877, -14.37074148296594)
  45 SketchLine_8 = Sketch_2.addLine(-6.679358717434877, -14.37074148296594, -6.679358717434877, 28.9438877755511)
  46 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  47 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  48 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  49 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  50 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_5.result())
  51 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_6.result())
  52 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_7.result())
  53 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
  54 model.do()
  55 Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f"), model.selection("FACE", "Sketch_2/Face-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f")])
  56 Common_1 = model.addCommon(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_1_2")])
  57 model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
  58 model.do()
  59 model.end()
  60
  61 from GeomAPI import  GeomAPI_Shape
  62
  63 model.testNbResults(Common_1, 1)
  64 model.testNbSubResults(Common_1, [0])
  65 model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
  66 model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [1])
  67 model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [4])
  68 model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [8])
  69
  70 assert(model.checkPythonDump())