src/FeaturesPlugin/Test/TestBooleanCommon_CompSolid_Face.py

   1 # Copyright (C) 2014-2023  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(21.16527496861552, 26.63979884904572, -22.80735826270614, 26.63979884904572)
  28 SketchLine_2 = Sketch_1.addLine(-22.80735826270614, 26.63979884904572, -22.80735826270614, -13.87637783487681)
  29 SketchLine_3 = Sketch_1.addLine(-22.80735826270614, -13.87637783487681, 21.16527496861552, -13.87637783487681)
  30 SketchLine_4 = Sketch_1.addLine(21.16527496861552, -13.87637783487681, 21.16527496861552, 26.63979884904572)
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  33 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  34 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  35 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  36 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  37 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  38 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  39 SketchLine_5 = Sketch_1.addLine(-2.257333687264361, 26.63979884904572, -2.257333687264361, -13.87637783487681)
  40 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
  41 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
  42 model.do()
  43 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  44 SketchLine_6 = Sketch_2.addLine(29.6987556208597, 11.4175813298688, 13.10955704685832, 11.4175813298688)
  45 SketchLine_7 = Sketch_2.addLine(13.10955704685832, 11.4175813298688, 13.10955704685832, -4.852594194632538)
  46 SketchLine_8 = Sketch_2.addLine(13.10955704685832, -4.852594194632538, 29.6987556208597, -4.852594194632538)
  47 SketchLine_9 = Sketch_2.addLine(29.6987556208597, -4.852594194632538, 29.6987556208597, 11.4175813298688)
  48 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
  49 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  50 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  51 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  52 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_6.result())
  53 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_7.result())
  54 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
  55 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
  56 model.do()
  57 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
  58 Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_6r-SketchLine_7f-SketchLine_8f-SketchLine_9f")])
  59 Common_1 = model.addCommon(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("COMPSOLID", "Extrusion_1_1")])
  60 model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
  61 model.do()
  62 model.end()
  63
  64 from GeomAPI import  GeomAPI_Shape
  65
  66 model.testNbResults(Common_1, 1)
  67 model.testNbSubResults(Common_1, [0])
  68 model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
  69 model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [1])
  70 model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [4])
  71 model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [8])
  72
  73 assert(model.checkPythonDump())