src/FeaturesPlugin/Test/TestBooleanCommon_CompSolidCompound_CompSolidCompound.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(-20.89528643446688, 23.53376279136156, -12.17630887873155, 30.26420160631515)
  29 SketchLine_1.result().setColor(225, 0, 0)
  30 SketchLine_2 = Sketch_1.addLine(-12.17630887873155, 30.26420160631515, -3.763260360039565, 22.15708212466651)
  31 SketchLine_2.result().setColor(225, 0, 0)
  32 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  33 SketchLine_3 = Sketch_1.addLine(-3.763260360039565, 22.15708212466651, -11.56445080464485, 13.8969981244962)
  34 SketchLine_3.result().setColor(225, 0, 0)
  35 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  36 SketchLine_4 = Sketch_1.addLine(-11.56445080464485, 13.8969981244962, -20.89528643446688, 23.53376279136156)
  37 SketchLine_4.result().setColor(225, 0, 0)
  38 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  39 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
  40 SketchLine_5 = Sketch_1.addLine(-20.89528643446688, 23.53376279136156, -3.763260360039565, 22.15708212466651)
  41 SketchLine_5.result().setColor(225, 0, 0)
  42 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.startPoint())
  43 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_5.endPoint())
  44 SketchLine_6 = Sketch_1.addLine(7.862043047607545, 23.07486923579655, 15.35730445516949, 31.02902419892351)
  45 SketchLine_6.result().setColor(225, 0, 0)
  46 SketchLine_7 = Sketch_1.addLine(15.35730445516949, 31.02902419892351, 24.53517556646984, 20.93336597649314)
  47 SketchLine_7.result().setColor(225, 0, 0)
  48 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  49 SketchLine_8 = Sketch_1.addLine(24.53517556646984, 20.93336597649314, 17.03991415890789, 12.67328197632283)
  50 SketchLine_8.result().setColor(225, 0, 0)
  51 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  52 SketchLine_9 = Sketch_1.addLine(17.03991415890789, 12.67328197632283, 7.862043047607545, 23.07486923579655)
  53 SketchLine_9.result().setColor(225, 0, 0)
  54 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  55 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_9.endPoint())
  56 SketchLine_10 = Sketch_1.addLine(7.862043047607545, 23.07486923579655, 24.53517556646984, 20.93336597649314)
  57 SketchLine_10.result().setColor(225, 0, 0)
  58 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_10.startPoint())
  59 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_10.endPoint())
  60 model.do()
  61 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  62 SketchLine_11 = Sketch_2.addLine(-6.516621693429666, 11.60253034667112, -9.88184110090646, 19.09779175423307)
  63 SketchLine_11.result().setColor(225, 0, 0)
  64 SketchLine_12 = Sketch_2.addLine(-9.88184110090646, 19.09779175423307, -1.162863545171131, 18.94482723571139)
  65 SketchLine_12.result().setColor(225, 0, 0)
  66 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  67 SketchLine_13 = Sketch_2.addLine(-1.162863545171131, 18.94482723571139, 0.8256751956106094, 13.43810456893119)
  68 SketchLine_13.result().setColor(225, 0, 0)
  69 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  70 SketchLine_14 = Sketch_2.addLine(0.8256751956106094, 13.43810456893119, -6.516621693429666, 11.60253034667112)
  71 SketchLine_14.result().setColor(225, 0, 0)
  72 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  73 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_14.endPoint())
  74 SketchLine_15 = Sketch_2.addLine(-1.162863545171131, 18.94482723571139, -6.516621693429666, 11.60253034667112)
  75 SketchLine_15.result().setColor(225, 0, 0)
  76 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_15.startPoint())
  77 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_15.endPoint())
  78 SketchLine_16 = Sketch_2.addLine(6.332397862390824, 16.34443042084296, 15.35730445516949, 18.79186271718972)
  79 SketchLine_16.result().setColor(225, 0, 0)
  80 SketchLine_17 = Sketch_2.addLine(15.35730445516949, 18.79186271718972, 12.75690764030107, 10.22584967997607)
  81 SketchLine_17.result().setColor(225, 0, 0)
  82 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
  83 SketchLine_18 = Sketch_2.addLine(12.75690764030107, 10.22584967997607, 6.179433343869151, 7.778417383629304)
  84 SketchLine_18.result().setColor(225, 0, 0)
  85 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
  86 SketchLine_19 = Sketch_2.addLine(6.179433343869151, 7.778417383629304, 6.332397862390824, 16.34443042084296)
  87 SketchLine_19.result().setColor(225, 0, 0)
  88 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
  89 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_19.endPoint())
  90 SketchLine_20 = Sketch_2.addLine(6.332397862390824, 16.34443042084296, 12.75690764030107, 10.22584967997607)
  91 SketchLine_20.result().setColor(225, 0, 0)
  92 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_20.startPoint())
  93 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_20.endPoint())
  94 model.do()
  95 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
  96 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 5, 5)
  97 Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("COMPSOLID", "Extrusion_1_2")])
  98 Compound_2 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_2_1"), model.selection("COMPSOLID", "Extrusion_2_2")])
  99 Common_1 = model.addCommon(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
 100 model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
 101 model.do()
 102 model.end()
 103
 104 from GeomAPI import  GeomAPI_Shape
 105
 106 model.testNbResults(Common_1, 1)
 107 model.testNbSubResults(Common_1, [2])
 108 model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [2])
 109 model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [10])
 110 model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [36])
 111 model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [72])
 112
 113 assert(model.checkPythonDump())