src/FeaturesPlugin/Test/TestBooleanCommon_CompSolidCompound_CompSolidCompound.py

   1 # Copyright (C) 2014-2019  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 # -*- coding: utf-8 -*-
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  29 SketchLine_1 = Sketch_1.addLine(-20.89528643446688, 23.53376279136156, -12.17630887873155, 30.26420160631515)
  30 SketchLine_2 = Sketch_1.addLine(-12.17630887873155, 30.26420160631515, -3.763260360039565, 22.15708212466651)
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  32 SketchLine_3 = Sketch_1.addLine(-3.763260360039565, 22.15708212466651, -11.56445080464485, 13.8969981244962)
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  34 SketchLine_4 = Sketch_1.addLine(-11.56445080464485, 13.8969981244962, -20.89528643446688, 23.53376279136156)
  35 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
  37 SketchLine_5 = Sketch_1.addLine(-20.89528643446688, 23.53376279136156, -3.763260360039565, 22.15708212466651)
  38 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.startPoint())
  39 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_5.endPoint())
  40 SketchLine_6 = Sketch_1.addLine(7.862043047607545, 23.07486923579655, 15.35730445516949, 31.02902419892351)
  41 SketchLine_7 = Sketch_1.addLine(15.35730445516949, 31.02902419892351, 24.53517556646984, 20.93336597649314)
  42 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  43 SketchLine_8 = Sketch_1.addLine(24.53517556646984, 20.93336597649314, 17.03991415890789, 12.67328197632283)
  44 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  45 SketchLine_9 = Sketch_1.addLine(17.03991415890789, 12.67328197632283, 7.862043047607545, 23.07486923579655)
  46 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  47 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_9.endPoint())
  48 SketchLine_10 = Sketch_1.addLine(7.862043047607545, 23.07486923579655, 24.53517556646984, 20.93336597649314)
  49 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_10.startPoint())
  50 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_10.endPoint())
  51 model.do()
  52 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  53 SketchLine_11 = Sketch_2.addLine(-6.516621693429666, 11.60253034667112, -9.88184110090646, 19.09779175423307)
  54 SketchLine_12 = Sketch_2.addLine(-9.88184110090646, 19.09779175423307, -1.162863545171131, 18.94482723571139)
  55 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  56 SketchLine_13 = Sketch_2.addLine(-1.162863545171131, 18.94482723571139, 0.8256751956106094, 13.43810456893119)
  57 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  58 SketchLine_14 = Sketch_2.addLine(0.8256751956106094, 13.43810456893119, -6.516621693429666, 11.60253034667112)
  59 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  60 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_14.endPoint())
  61 SketchLine_15 = Sketch_2.addLine(-1.162863545171131, 18.94482723571139, -6.516621693429666, 11.60253034667112)
  62 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_15.startPoint())
  63 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_15.endPoint())
  64 SketchLine_16 = Sketch_2.addLine(6.332397862390824, 16.34443042084296, 15.35730445516949, 18.79186271718972)
  65 SketchLine_17 = Sketch_2.addLine(15.35730445516949, 18.79186271718972, 12.75690764030107, 10.22584967997607)
  66 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
  67 SketchLine_18 = Sketch_2.addLine(12.75690764030107, 10.22584967997607, 6.179433343869151, 7.778417383629304)
  68 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
  69 SketchLine_19 = Sketch_2.addLine(6.179433343869151, 7.778417383629304, 6.332397862390824, 16.34443042084296)
  70 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
  71 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_19.endPoint())
  72 SketchLine_20 = Sketch_2.addLine(6.332397862390824, 16.34443042084296, 12.75690764030107, 10.22584967997607)
  73 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_20.startPoint())
  74 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_20.endPoint())
  75 model.do()
  76 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
  77 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 5, 5)
  78 Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("COMPSOLID", "Extrusion_1_2")])
  79 Compound_2 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_2_1"), model.selection("COMPSOLID", "Extrusion_2_2")])
  80 Common_1 = model.addCommon(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
  81 model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
  82 model.do()
  83 model.end()
  84
  85 from GeomAPI import  GeomAPI_Shape
  86
  87 model.testNbResults(Common_1, 1)
  88 model.testNbSubResults(Common_1, [2])
  89 model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [2])
  90 model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [10])
  91 model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [36])
  92 model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [72])
  93
  94 assert(model.checkPythonDump())