src/FeaturesPlugin/Test/Test3139.py

   1 # Copyright (C) 2020-2022  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(52.9121725731895, 8.799859429739596, 7.781201848998454, 8.799859429739596)
  28 SketchLine_2 = Sketch_1.addLine(7.781201848998454, 8.799859429739596, 7.781201848998454, 36.33111129445148)
  29 SketchLine_3 = Sketch_1.addLine(7.781201848998454, 36.33111129445148, 52.9121725731895, 36.33111129445148)
  30 SketchLine_4 = Sketch_1.addLine(52.9121725731895, 36.33111129445148, 52.9121725731895, 8.799859429739596)
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  33 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  34 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  35 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  36 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  37 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  38 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  39 SketchLine_5 = Sketch_1.addLine(29.87981510015411, 36.33111129445148, 29.87981510015411, 8.799859429739596)
  40 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_3.result())
  41 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_1.result())
  42 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_5.result())
  43 SketchCircle_1 = Sketch_1.addCircle(88.70570107858241, 30.96918335901386, 15.95582825781952)
  44 model.do()
  45 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 20, 0)
  46 Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
  47 Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
  48 SketchLine_6 = Sketch_2.addLine(91.78842679005474, 52.44197384283513, 18.42664179347724, 52.44197384283513)
  49 SketchLine_7 = Sketch_2.addLine(18.42664179347724, 52.44197384283513, 18.42664179347724, 23.73518840939176)
  50 SketchLine_8 = Sketch_2.addLine(18.42664179347724, 23.73518840939176, 91.78842679005474, 23.73518840939176)
  51 SketchLine_9 = Sketch_2.addLine(91.78842679005474, 23.73518840939176, 91.78842679005474, 52.44197384283513)
  52 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
  53 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  54 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  55 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  56 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_6.result())
  57 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_7.result())
  58 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
  59 SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_9.result())
  60 model.do()
  61 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_6r-SketchLine_7f-SketchLine_8f-SketchLine_9f")], model.selection(), 10, 0)
  62 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Compound_1_1_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
  63 model.do()
  64
  65 Part_2 = model.addPart(partSet)
  66 Part_2_doc = Part_2.document()
  67 Sketch_3 = model.addSketch(Part_2_doc, model.defaultPlane("XOY"))
  68 SketchLine_10 = Sketch_3.addLine(52.9121725731895, 8.799859429739596, 7.781201848998454, 8.799859429739596)
  69 SketchLine_11 = Sketch_3.addLine(7.781201848998454, 8.799859429739596, 7.781201848998454, 36.33111129445148)
  70 SketchLine_12 = Sketch_3.addLine(7.781201848998454, 36.33111129445148, 52.9121725731895, 36.33111129445148)
  71 SketchLine_13 = Sketch_3.addLine(52.9121725731895, 36.33111129445148, 52.9121725731895, 8.799859429739596)
  72 SketchConstraintCoincidence_11 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_10.startPoint())
  73 SketchConstraintCoincidence_12 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  74 SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  75 SketchConstraintCoincidence_14 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  76 SketchConstraintHorizontal_5 = Sketch_3.setHorizontal(SketchLine_10.result())
  77 SketchConstraintVertical_6 = Sketch_3.setVertical(SketchLine_11.result())
  78 SketchConstraintHorizontal_6 = Sketch_3.setHorizontal(SketchLine_12.result())
  79 SketchConstraintVertical_7 = Sketch_3.setVertical(SketchLine_13.result())
  80 SketchLine_14 = Sketch_3.addLine(29.87981510015411, 36.33111129445148, 29.87981510015411, 8.799859429739596)
  81 SketchConstraintCoincidence_15 = Sketch_3.setCoincident(SketchLine_14.startPoint(), SketchLine_12.result())
  82 SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchLine_14.endPoint(), SketchLine_10.result())
  83 SketchConstraintVertical_8 = Sketch_3.setVertical(SketchLine_14.result())
  84 SketchCircle_2 = Sketch_3.addCircle(88.70570107858241, 30.96918335901386, 15.95582825781952)
  85 model.do()
  86 Extrusion_3 = model.addExtrusion(Part_2_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 20, 0)
  87 Compound_2 = model.addCompound(Part_2_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
  88 Sketch_4 = model.addSketch(Part_2_doc, model.standardPlane("XOY"))
  89 SketchLine_15 = Sketch_4.addLine(91.78842679005474, 52.44197384283513, 18.42664179347724, 52.44197384283513)
  90 SketchLine_16 = Sketch_4.addLine(18.42664179347724, 52.44197384283513, 18.42664179347724, 23.73518840939176)
  91 SketchLine_17 = Sketch_4.addLine(18.42664179347724, 23.73518840939176, 91.78842679005474, 23.73518840939176)
  92 SketchLine_18 = Sketch_4.addLine(91.78842679005474, 23.73518840939176, 91.78842679005474, 52.44197384283513)
  93 SketchConstraintCoincidence_17 = Sketch_4.setCoincident(SketchLine_18.endPoint(), SketchLine_15.startPoint())
  94 SketchConstraintCoincidence_18 = Sketch_4.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
  95 SketchConstraintCoincidence_19 = Sketch_4.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
  96 SketchConstraintCoincidence_20 = Sketch_4.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
  97 SketchConstraintHorizontal_7 = Sketch_4.setHorizontal(SketchLine_15.result())
  98 SketchConstraintVertical_9 = Sketch_4.setVertical(SketchLine_16.result())
  99 SketchConstraintHorizontal_8 = Sketch_4.setHorizontal(SketchLine_17.result())
 100 SketchConstraintVertical_10 = Sketch_4.setVertical(SketchLine_18.result())
 101 model.do()
 102 Extrusion_4 = model.addExtrusion(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_6r-SketchLine_7f-SketchLine_8f-SketchLine_9f")], model.selection(), 10, 0)
 103 Cut_2 = model.addCut(Part_2_doc, [model.selection("SOLID", "Compound_1_1_1_1")], [model.selection("SOLID", "Extrusion_2_1")], keepSubResults = True)
 104 model.do()
 105
 106 model.end()
 107
 108 from GeomAPI import *
 109
 110 model.testNbResults(Part_1, 1)
 111 model.testNbSubResults(Part_1, [0])
 112 model.testNbSubShapes(Part_1, GeomAPI_Shape.SOLID, [2])
 113 model.testNbSubShapes(Part_1, GeomAPI_Shape.FACE, [16])
 114 model.testNbSubShapes(Part_1, GeomAPI_Shape.EDGE, [74])
 115 model.testNbSubShapes(Part_1, GeomAPI_Shape.VERTEX, [148])
 116 model.testResultsVolumes(Part_1, [23407.60956])
 117
 118 model.testNbResults(Part_2, 1)
 119 model.testNbSubResults(Part_2, [0])
 120 model.testNbSubShapes(Part_2, GeomAPI_Shape.SOLID, [3])
 121 model.testNbSubShapes(Part_2, GeomAPI_Shape.FACE, [19])
 122 model.testNbSubShapes(Part_2, GeomAPI_Shape.EDGE, [80])
 123 model.testNbSubShapes(Part_2, GeomAPI_Shape.VERTEX, [160])
 124 model.testResultsVolumes(Part_2, [39403.873983562])