src/FeaturesPlugin/Test/Test2854.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 # Test for the order of extrusion results: even compsolids or solids, they depend on the order
  22 # of created sketch entities
  23
  24 from salome.shaper import model
  25 from GeomAPI import *
  26
  27 model.begin()
  28 partSet = model.moduleDocument()
  29 Part_1 = model.addPart(partSet)
  30 Part_1_doc = Part_1.document()
  31 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  32 SketchLine_1 = Sketch_1.addLine(20.52339901477833, 44.52955665024631, -23.88177339901478, 44.52955665024631)
  33 SketchLine_2 = Sketch_1.addLine(-23.88177339901478, 44.52955665024631, -23.88177339901478, 15.29926108374386)
  34 SketchLine_3 = Sketch_1.addLine(-23.88177339901478, 15.29926108374386, 20.52339901477833, 15.29926108374386)
  35 SketchLine_4 = Sketch_1.addLine(20.52339901477833, 15.29926108374386, 20.52339901477833, 44.52955665024631)
  36 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  37 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  38 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  39 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  40 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  41 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  42 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  43 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  44 SketchLine_5 = Sketch_1.addLine(29.23029556650247, 27.36453201970445, -5.970443349753695, 27.36453201970445)
  45 SketchLine_6 = Sketch_1.addLine(-5.970443349753695, 27.36453201970445, -5.970443349753695, -13.80665024630542)
  46 SketchLine_7 = Sketch_1.addLine(-5.970443349753695, -13.80665024630542, 29.23029556650247, -13.80665024630542)
  47 SketchLine_8 = Sketch_1.addLine(29.23029556650247, -13.80665024630542, 29.23029556650247, 27.36453201970445)
  48 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  49 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  50 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  51 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  52 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
  53 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
  54 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
  55 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
  56 model.do()
  57 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "all-in-Sketch_1")], model.selection(), 10, 0)
  58 Group_1_objects = [model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchLine_3"), model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Extrusion_1_1_3/From_Face"), model.selection("FACE", "Extrusion_1_1_3/To_Face"), model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchLine_4"), model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_3"), model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_2"), model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Extrusion_1_1_1/To_Face"), model.selection("FACE", "Extrusion_1_1_1/From_Face"), model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_1"), model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4"), model.selection("FACE", "Extrusion_1_1_2/Generated_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Extrusion_1_1_2/From_Face"), model.selection("FACE", "Extrusion_1_1_2/To_Face"), model.selection("FACE", "Extrusion_1_1_2/Generated_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Extrusion_1_1_2/Generated_Face&Sketch_1/SketchLine_3"), model.selection("FACE", "Extrusion_1_1_2/Generated_Face&Sketch_1/SketchLine_4")]
  59 Group_1 = model.addGroup(Part_1_doc, Group_1_objects)
  60 model.do()
  61 # add a circle to the sketch
  62 SketchCircle_1 = Sketch_1.addCircle(-26.84625185927467, -13.07763963304469, 9.031583682868897)
  63 model.end()
  64
  65 # check group is valid
  66 from ModelAPI import *
  67 aFactory = ModelAPI_Session.get().validators()
  68 assert(aFactory.validate(Group_1.feature()))
  69
  70 selectionList = Group_1.feature().selectionList("group_list")
  71 assert(selectionList.size() == 22)
  72 for i in range(22):
  73   assert(Group_1.groupList().value(i).value().shapeType() == GeomAPI_Shape.FACE)