src/FeaturesPlugin/Test/Test2854.py

   1 # Copyright (C) 2014-2023  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 # Test for the order of extrusion results: even compsolids or solids, they depend on the order
  21 # of created sketch entities
  22
  23 from salome.shaper import model
  24 from GeomAPI import *
  25
  26 model.begin()
  27 partSet = model.moduleDocument()
  28 Part_1 = model.addPart(partSet)
  29 Part_1_doc = Part_1.document()
  30 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  31 SketchLine_1 = Sketch_1.addLine(20.52339901477833, 44.52955665024631, -23.88177339901478, 44.52955665024631)
  32 SketchLine_2 = Sketch_1.addLine(-23.88177339901478, 44.52955665024631, -23.88177339901478, 15.29926108374386)
  33 SketchLine_3 = Sketch_1.addLine(-23.88177339901478, 15.29926108374386, 20.52339901477833, 15.29926108374386)
  34 SketchLine_4 = Sketch_1.addLine(20.52339901477833, 15.29926108374386, 20.52339901477833, 44.52955665024631)
  35 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  36 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  37 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  38 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  39 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  40 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  41 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  42 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  43 SketchLine_5 = Sketch_1.addLine(29.23029556650247, 27.36453201970445, -5.970443349753695, 27.36453201970445)
  44 SketchLine_6 = Sketch_1.addLine(-5.970443349753695, 27.36453201970445, -5.970443349753695, -13.80665024630542)
  45 SketchLine_7 = Sketch_1.addLine(-5.970443349753695, -13.80665024630542, 29.23029556650247, -13.80665024630542)
  46 SketchLine_8 = Sketch_1.addLine(29.23029556650247, -13.80665024630542, 29.23029556650247, 27.36453201970445)
  47 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  48 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  49 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  50 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  51 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
  52 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
  53 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
  54 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
  55 model.do()
  56 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "all-in-Sketch_1")], model.selection(), 10, 0)
  57 Group_1_objects = [model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchLine_8"), model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchLine_3"), model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Extrusion_1_1_3/From_Face"), model.selection("FACE", "Extrusion_1_1_3/To_Face"), model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchLine_4"), model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_3"), model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_2"), model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Extrusion_1_1_1/To_Face"), model.selection("FACE", "Extrusion_1_1_1/From_Face"), model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_1"), model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4"), model.selection("FACE", "Extrusion_1_1_2/Generated_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Extrusion_1_1_2/From_Face"), model.selection("FACE", "Extrusion_1_1_2/To_Face"), model.selection("FACE", "Extrusion_1_1_2/Generated_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Extrusion_1_1_2/Generated_Face&Sketch_1/SketchLine_3"), model.selection("FACE", "Extrusion_1_1_2/Generated_Face&Sketch_1/SketchLine_4")]
  58 Group_1 = model.addGroup(Part_1_doc, Group_1_objects)
  59 model.do()
  60 # add a circle to the sketch
  61 SketchCircle_1 = Sketch_1.addCircle(-26.84625185927467, -13.07763963304469, 9.031583682868897)
  62 model.end()
  63
  64 # check group is valid
  65 from ModelAPI import *
  66 aFactory = ModelAPI_Session.get().validators()
  67 assert(aFactory.validate(Group_1.feature()))
  68
  69 selectionList = Group_1.feature().selectionList("group_list")
  70 assert(selectionList.size() == 22)
  71 for i in range(22):
  72   assert(Group_1.groupList().value(i).value().shapeType() == GeomAPI_Shape.FACE)