src/FeaturesPlugin/Test/Test2693.py

   1 # Copyright (C) 2014-2022  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 model.addParameter(partSet, "hh", "20")
  27 Part_1 = model.addPart(partSet)
  28 Part_1_doc = Part_1.document()
  29 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  30 SketchLine_1 = Sketch_1.addLine(-17.23654191510748, 16.36770059625795, -4.760492650097712, 19.4251823602345)
  31 SketchLine_2 = Sketch_1.addLine(20, 2.414080216212369e-15, 20, -31)
  32 SketchLine_3 = Sketch_1.addLine(2.928932188134523, -38.07106781186548, -8.677669529663685, -26.46446609406726)
  33 SketchLine_4 = Sketch_1.addLine(-12.21320343559642, -25, -20.00000000000047, -25)
  34 SketchArc_1 = Sketch_1.addArc(10, -31, 20, -31, 2.928932188134523, -38.07106781186548, True)
  35 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchArc_1.startPoint())
  36 SketchConstraintCoincidence_1.setName("SketchConstraintCoincidence_2")
  37 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchLine_2.result(), SketchArc_1.results()[1])
  38 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_3.startPoint())
  39 SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_3")
  40 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchLine_3.result(), SketchArc_1.results()[1])
  41 SketchArc_2 = Sketch_1.addArc(-12.21320343559642, -30, -8.677669529663685, -26.46446609406726, -12.21320343559642, -25, False)
  42 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_3.endPoint())
  43 SketchConstraintCoincidence_3.setName("SketchConstraintCoincidence_4")
  44 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_4.startPoint())
  45 SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_5")
  46 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_4.result())
  47 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_3.result())
  48 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_4.result())
  49 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  50 SketchArc_3 = Sketch_1.addArc(5.671735138196638e-24, 3.298692290329323e-23, -4.760492650097712, 19.4251823602345, 20, 2.414080216212369e-15, True)
  51 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchArc_3.startPoint())
  52 SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_6")
  53 SketchConstraintTangent_5 = Sketch_1.setTangent(SketchLine_1.result(), SketchArc_3.results()[1])
  54 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_2.startPoint())
  55 SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_7")
  56 SketchConstraintTangent_6 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_2.result())
  57 SketchArc_4 = Sketch_1.addArc(-12, -5, -22.35294117647118, -24.41176470588231, -17.23654191510748, 16.36770059625795, True)
  58 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_1.startPoint())
  59 SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_9")
  60 SketchConstraintTangent_7 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchLine_1.result())
  61 SketchConstraintTangent_7.setName("SketchConstraintTangent_8")
  62 SketchCircle_1 = Sketch_1.addCircle(-22, -5, 7.5)
  63 SketchCircle_2 = Sketch_1.addCircle(5.671735138196638e-24, 3.298692290329323e-23, 10)
  64 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_3.center(), SketchCircle_2.center())
  65 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_10")
  66 SketchCircle_3 = Sketch_1.addCircle(7, -25, 7.5)
  67 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 10)
  68 SketchConstraintRadius_1.setName("SketchConstraintRadius_2")
  69 SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_4.result(), SketchLine_3.result(), 134.9999999999999)
  70 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 5)
  71 SketchConstraintRadius_2.setName("SketchConstraintRadius_3")
  72 SketchConstraintRadius_3 = Sketch_1.setRadius(SketchArc_4.results()[1], 22)
  73 SketchConstraintRadius_3.setName("SketchConstraintRadius_4")
  74 SketchConstraintRadius_4 = Sketch_1.setRadius(SketchArc_3.results()[1], 20)
  75 SketchConstraintRadius_4.setName("SketchConstraintRadius_5")
  76 SketchPoint_1 = Sketch_1.addPoint(-20.00000000000047, -25)
  77 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_4.endPoint())
  78 SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_12")
  79 SketchArc_5 = Sketch_1.addArc(-20.00000000000047, -20, -20.00000000000047, -25, -22.35294117647118, -24.41176470588231, True)
  80 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchArc_5.startPoint())
  81 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11")
  82 SketchConstraintTangent_8 = Sketch_1.setTangent(SketchLine_4.result(), SketchArc_5.results()[1])
  83 SketchConstraintTangent_8.setName("SketchConstraintTangent_9")
  84 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_4.startPoint(), SketchArc_5.endPoint())
  85 SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_13")
  86 SketchConstraintDistanceHorizontal_1 = Sketch_1.setHorizontalDistance(SketchArc_4.center(), SketchCircle_2.center(), 12)
  87 SketchConstraintDistanceHorizontal_2 = Sketch_1.setHorizontalDistance(SketchCircle_1.center(), SketchArc_3.center(), 22)
  88 SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchArc_3.center(), SketchArc_4.center(), 5)
  89 SketchLine_5 = Sketch_1.addLine(-22, -5, -12, -5)
  90 SketchLine_5.setAuxiliary(True)
  91 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchCircle_1.center(), SketchLine_5.startPoint())
  92 SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_14")
  93 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_5.endPoint())
  94 SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_15")
  95 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_5.result())
  96 SketchConstraintRadius_5 = Sketch_1.setRadius(SketchCircle_1.results()[1], 7.5)
  97 SketchConstraintRadius_5.setName("SketchConstraintRadius_6")
  98 SketchConstraintDistanceHorizontal_3 = Sketch_1.setHorizontalDistance(SketchCircle_2.center(), SketchCircle_3.center(), 7)
  99 SketchConstraintDistanceVertical_2 = Sketch_1.setVerticalDistance(SketchCircle_2.center(), SketchCircle_3.center(), 25)
 100 SketchConstraintDistanceVertical_3 = Sketch_1.setVerticalDistance(SketchArc_3.center(), SketchArc_1.center(), 31)
 101 SketchConstraintRadius_6 = Sketch_1.setRadius(SketchCircle_3.results()[1], 7.5)
 102 SketchConstraintRadius_6.setName("SketchConstraintRadius_7")
 103 SketchConstraintRadius_7 = Sketch_1.setRadius(SketchCircle_2.results()[1], 10)
 104 SketchConstraintRadius_7.setName("SketchConstraintRadius_8")
 105 SketchConstraintRadius_8 = Sketch_1.setRadius(SketchArc_5.results()[1], 5)
 106 SketchConstraintRadius_8.setName("SketchConstraintRadius_9")
 107 SketchConstraintTangent_9 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchArc_5.results()[1])
 108 SketchConstraintTangent_9.setName("SketchConstraintTangent_10")
 109 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
 110 SketchPoint_2 = SketchProjection_1.createdFeature()
 111 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_3.center(), SketchAPI_Point(SketchPoint_2).coordinates())
 112 SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_16")
 113 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_5.startPoint(), SketchLine_4.result(), 20, True)
 114 model.do()
 115 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_4_2f-SketchArc_5_2f-SketchLine_4r-SketchArc_2_2r-SketchLine_3r-SketchArc_1_2f-SketchLine_2r-SketchArc_3_2f-SketchLine_1r-SketchCircle_1_2r-SketchCircle_2_2r-SketchCircle_3_2r")], model.selection(), 6.5, 0)
 116 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [], model.selection(), 0, 100, [model.selection("SOLID", "Extrusion_1_1")])
 117 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2"))
 118 SketchLine_6 = Sketch_2.addLine(12.25, 6.5, -12.25, 6.5)
 119 SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/To_Face]"), False)
 120 SketchLine_7 = SketchProjection_2.createdFeature()
 121 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.result())
 122 SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_17")
 123 SketchLine_8 = Sketch_2.addLine(-12.25, 6.5, -12.25, 4.5)
 124 SketchLine_9 = Sketch_2.addLine(-12.25, 4.5, 12.25, 4.5)
 125 SketchLine_10 = Sketch_2.addLine(12.25, 4.5, 12.25, 6.5)
 126 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_6.startPoint())
 127 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_18")
 128 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_8.startPoint())
 129 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_19")
 130 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
 131 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_20")
 132 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
 133 SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_21")
 134 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_6.result())
 135 SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_8.result())
 136 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_9.result())
 137 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_10.result())
 138 SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_9.result(), 24.5)
 139 SketchConstraintLength_2 = Sketch_2.setLength(SketchLine_8.result(), 2)
 140 SketchPoint_3 = Sketch_2.addPoint(2.442490654175344e-15, 6.499999999999999)
 141 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchPoint_3.coordinates(), SketchLine_6.result())
 142 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_22")
 143 SketchConstraintMiddle_1 = Sketch_2.setMiddlePoint(SketchPoint_3.coordinates(), SketchLine_6.result())
 144 SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2]"), False)
 145 SketchLine_11 = SketchProjection_3.createdFeature()
 146 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchPoint_3.coordinates(), SketchLine_11.result())
 147 SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_23")
 148 ExtrusionCut_1.setNestedSketch(Sketch_2)
 149 model.do()
 150 model.testHaveNamingSubshapes(ExtrusionCut_1, model, Part_1_doc)
 151 model.end()
 152
 153 assert(model.checkPythonDump())