1 ## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
3 ## This library is free software; you can redistribute it and/or
4 ## modify it under the terms of the GNU Lesser General Public
5 ## License as published by the Free Software Foundation; either
6 ## version 2.1 of the License, or (at your option) any later version.
8 ## This library is distributed in the hope that it will be useful,
9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 ## Lesser General Public License for more details.
13 ## You should have received a copy of the GNU Lesser General Public
14 ## License along with this library; if not, write to the Free Software
15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 ## See http:##www.salome-platform.org/ or
18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
21 # -*- coding: utf-8 -*-
23 from GeomAPI import GeomAPI_Pnt
24 from SketchAPI import *
26 from salome.shaper import model
29 partSet = model.moduleDocument()
30 Part_1 = model.addPart(partSet)
31 Part_1_doc = Part_1.document()
32 model.addParameter(Part_1_doc, "angle", "27.5")
33 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
34 SketchLine_1 = Sketch_1.addLine(0, 4, 6.2, 4)
35 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
36 SketchLine_2 = SketchProjection_1.createdFeature()
37 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
38 SketchLine_3 = Sketch_1.addLine(6.2, 4, 6.2, 2.5)
39 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
40 SketchLine_4 = Sketch_1.addLine(6.2, 2.5, 3.5, 2)
41 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
42 SketchLine_5 = Sketch_1.addLine(3.5, 2, 3.5, 0)
43 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
44 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
45 SketchLine_6 = SketchProjection_2.createdFeature()
46 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
47 SketchLine_7 = Sketch_1.addLine(3.5, 0, 0, 0)
48 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
49 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_7.endPoint())
50 SketchLine_8 = Sketch_1.addLine(0, 4, 0, 0)
51 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_8.startPoint())
52 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_8.endPoint())
53 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_5.result())
54 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_3.result())
55 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
56 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), 3.5)
57 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_1.result(), 6.2)
58 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_3.result(), 1.5)
59 SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 4)
60 SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_5.result(), 2)
62 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", GeomAPI_Pnt(3.1, 0, 2))], model.selection("EDGE", "PartSet/OZ"), 360, 0)
63 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", GeomAPI_Pnt(0, 0, 4)))
64 SketchCircle_1 = Sketch_2.addCircle(4.027018127601872, 2.325000000002457, 1.1)
65 SketchCircle_2 = Sketch_2.addCircle(-4.027018127597639, 2.325000000000002, 1.1)
66 SketchCircle_3 = Sketch_2.addCircle(7.188370358619843e-12, -4.650000000090492, 1.1)
67 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", GeomAPI_Pnt(0, 0, 4)), False)
68 SketchPoint_1 = SketchProjection_3.createdFeature()
69 SketchCircle_4 = Sketch_2.addCircle(0, 0, 4.65)
70 SketchCircle_4.setAuxiliary(True)
71 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchPoint_1.result(), SketchCircle_4.center())
72 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OX"), False)
73 SketchLine_9 = SketchProjection_4.createdFeature()
74 SketchLine_10 = Sketch_2.addLine(0, 0, 4.027018127601872, 2.325000000002457)
75 SketchLine_10.setAuxiliary(True)
76 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_10.startPoint())
77 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchCircle_1.center(), SketchLine_10.endPoint())
78 SketchLine_11 = Sketch_2.addLine(0, 0, -4.027018127597639, 2.325000000000002)
79 SketchLine_11.setAuxiliary(True)
80 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_11.startPoint())
81 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchCircle_2.center(), SketchLine_11.endPoint())
82 SketchLine_12 = Sketch_2.addLine(0, 0, 7.188370358619843e-12, -4.650000000090492)
83 SketchLine_12.setAuxiliary(True)
84 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_12.startPoint())
85 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchCircle_3.center(), SketchLine_12.endPoint())
86 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchCircle_2.center(), SketchCircle_4.results()[1])
87 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchCircle_1.center(), SketchCircle_4.results()[1])
88 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchCircle_4.results()[1])
89 SketchConstraintRadius_1 = Sketch_2.setRadius(SketchCircle_4.results()[1], 4.65)
90 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_1.results()[1], 1.1)
91 SketchConstraintEqual_1 = Sketch_2.setEqual(SketchCircle_1.results()[1], SketchCircle_2.results()[1])
92 SketchConstraintEqual_2 = Sketch_2.setEqual(SketchCircle_2.results()[1], SketchCircle_3.results()[1])
93 SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", GeomAPI_Pnt(3.1, 0, 4)), False)
94 SketchLine_13 = SketchProjection_5.createdFeature()
95 SketchConstraintAngle_1 = Sketch_2.setAngle(SketchLine_13.result(), SketchLine_10.result(), 30)
96 SketchConstraintAngle_2 = Sketch_2.setAngle(SketchLine_10.result(), SketchLine_11.result(), 120)
97 SketchConstraintAngle_3 = Sketch_2.setAngle(SketchLine_11.result(), SketchLine_12.result(), 120)
98 SketchCircle_5 = Sketch_2.addCircle(4.645574230355638, 0.2028301512488116, 0.8)
99 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchCircle_4.results()[1], SketchCircle_5.center())
100 SketchCircle_6 = Sketch_2.addCircle(4.645574230355638, 0.2028301512488116, 0.65)
101 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchCircle_5.center(), SketchCircle_6.center())
102 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_6.results()[1], 0.65)
103 SketchConstraintRadius_4 = Sketch_2.setRadius(SketchCircle_5.results()[1], 0.8)
104 SketchLine_14 = Sketch_2.addLine(0, 0, 4.645574230355638, 0.2028301512488116)
105 SketchLine_14.setAuxiliary(True)
106 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_14.startPoint())
107 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchCircle_5.center(), SketchLine_14.endPoint())
108 SketchConstraintAngle_4 = Sketch_2.setAngle(SketchLine_14.result(), SketchLine_10.result(), "angle")
109 SketchCircle_7 = Sketch_2.addCircle(2.498443178812738, 3.921770223029927, 0.65)
110 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchCircle_4.results()[1], SketchCircle_7.center())
111 SketchCircle_8 = Sketch_2.addCircle(2.498443178812738, 3.921770223029927, 0.8)
112 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchCircle_4.results()[1], SketchCircle_8.center())
113 SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchCircle_7.center(), SketchCircle_8.center())
114 SketchConstraintEqual_3 = Sketch_2.setEqual(SketchCircle_6.results()[1], SketchCircle_7.results()[1])
115 SketchConstraintEqual_4 = Sketch_2.setEqual(SketchCircle_8.results()[1], SketchCircle_5.results()[1])
116 SketchLine_15 = Sketch_2.addLine(0, 0, 2.498443178812738, 3.921770223029927)
117 SketchLine_15.setAuxiliary(True)
118 SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_15.startPoint())
119 SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchCircle_7.center(), SketchLine_15.endPoint())
120 SketchConstraintAngle_5 = Sketch_2.setAngle(SketchLine_10.result(), SketchLine_15.result(), "angle")
121 SketchMultiRotation_1 = Sketch_2.addRotation([SketchCircle_8.results()[1], SketchCircle_5.results()[1]], SketchCircle_4.center(), 360, 3, True)
122 [SketchCircle_9, SketchCircle_10, SketchCircle_11, SketchCircle_12] = SketchMultiRotation_1.rotated()
123 SketchCircle_12.setName("SketchCircle_13")
124 SketchCircle_12.result().setName("SketchCircle_13")
125 SketchCircle_12.results()[1].setName("SketchCircle_13_2")
126 SketchCircle_11.setName("SketchCircle_12")
127 SketchCircle_11.result().setName("SketchCircle_12")
128 SketchCircle_11.results()[1].setName("SketchCircle_12_2")
129 SketchMultiRotation_2 = Sketch_2.addRotation([SketchCircle_6.results()[1], SketchCircle_7.results()[1]], SketchAPI_Line(SketchLine_9).startPoint(), 120, 2)
130 [SketchCircle_13, SketchCircle_14] = SketchMultiRotation_2.rotated()
131 SketchCircle_14.setName("SketchCircle_17")
132 SketchCircle_14.result().setName("SketchCircle_17")
133 SketchCircle_14.results()[1].setName("SketchCircle_17_2")
134 SketchCircle_13.setName("SketchCircle_14")
135 SketchCircle_13.result().setName("SketchCircle_14")
136 SketchCircle_13.results()[1].setName("SketchCircle_14_2")
137 SketchCircle_15 = Sketch_2.addCircle(0, 5, 0.45)
138 SketchCircle_15.setName("SketchCircle_15")
139 SketchCircle_15.result().setName("SketchCircle_15")
140 SketchCircle_15.results()[1].setName("SketchCircle_15_2")
141 SketchLine_16 = Sketch_2.addLine(0, 0, 0, 5)
142 SketchLine_16.setAuxiliary(True)
143 SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_16.startPoint())
144 SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchCircle_15.center(), SketchLine_16.endPoint())
145 SketchConstraintLength_6 = Sketch_2.setLength(SketchLine_16.result(), 5)
146 SketchProjection_6 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
147 SketchLine_17 = SketchProjection_6.createdFeature()
148 SketchConstraintCoincidence_31 = Sketch_2.setCoincident(SketchCircle_15.center(), SketchLine_17.result())
149 SketchConstraintRadius_5 = Sketch_2.setRadius(SketchCircle_15.results()[1], 0.45)
150 SketchProjection_7 = Sketch_2.addProjection(model.selection("EDGE", GeomAPI_Pnt(-6.2, 7.59281015471359e-16, 4)), False)
151 SketchCircle_16 = SketchProjection_7.createdFeature()
152 SketchCircle_16.setName("SketchCircle_16")
153 SketchCircle_16.result().setName("SketchCircle_16")
154 SketchCircle_16.results()[1].setName("SketchCircle_16_2")
155 SketchCircle_17 = Sketch_2.addCircle(4.259590630302756, -2.982597469025441, 0.5)
156 SketchCircle_17.setName("SketchCircle_18")
157 SketchCircle_17.result().setName("SketchCircle_18")
158 SketchCircle_17.results()[1].setName("SketchCircle_18_2")
159 SketchCircle_18 = Sketch_2.addCircle(3.276608177155966, -2.294305745404186, 0.3)
160 SketchCircle_18.setName("SketchCircle_19")
161 SketchCircle_18.result().setName("SketchCircle_19")
162 SketchCircle_18.results()[1].setName("SketchCircle_19_2")
163 SketchLine_18 = Sketch_2.addLine(0, 0, 4.259590630302756, -2.982597469025441)
164 SketchLine_18.setAuxiliary(True)
165 SketchConstraintCoincidence_32 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_18.startPoint())
166 SketchConstraintCoincidence_33 = Sketch_2.setCoincident(SketchCircle_17.center(), SketchLine_18.endPoint())
167 SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchCircle_18.center(), SketchLine_18.result())
168 SketchProjection_8 = Sketch_2.addProjection(model.selection("EDGE", GeomAPI_Pnt(3.1, 0, 4)), False)
169 SketchLine_19 = SketchProjection_8.createdFeature()
170 SketchConstraintAngle_6 = Sketch_2.setAngleBackward(SketchLine_19.result(), SketchLine_18.result(), 35)
171 SketchConstraintRadius_6 = Sketch_2.setRadius(SketchCircle_17.results()[1], 0.5)
172 SketchConstraintRadius_7 = Sketch_2.setRadius(SketchCircle_18.results()[1], 0.3)
173 SketchConstraintDistance_1 = Sketch_2.setDistance(SketchCircle_4.center(), SketchCircle_18.center(), 4, True)
174 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchCircle_4.center(), SketchLine_18.endPoint(), 5.2, True)
176 ExtrusionCut_1_objects_1 = [model.selection("WIRE", GeomAPI_Pnt(2.927018127601872, 2.325000000002457, 4)), model.selection("WIRE", GeomAPI_Pnt(1.848443178812738, 3.921770223029927, 4)), model.selection("WIRE", GeomAPI_Pnt(3.995574230355639, 0.2028301512488117, 4)), model.selection("WIRE_2", GeomAPI_Pnt(-3.148443178812729, 3.921770223029919, 4)), model.selection("WIRE", GeomAPI_Pnt(-5.127018127597639, 2.325000000000002, 4)), model.selection("WIRE_2", GeomAPI_Pnt(-5.29557423035565, 0.2028301512488154, 4)), model.selection("FACE", GeomAPI_Pnt(7.188472039842964e-12, -4.650000000090492, 4)), model.selection("FACE", GeomAPI_Pnt(4.259590630302756, -2.982597469025441, 4)), model.selection("FACE", GeomAPI_Pnt(3.276608177155966, -2.294305745404186, 4))]
177 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_1_objects_1, model.selection(), model.selection("FACE", GeomAPI_Pnt(0, 0, 0)), 0, model.selection(), 0, [model.selection("SOLID", GeomAPI_Pnt(-7.561538823095622e-16, 6.008767139946657e-17, 2.62684985301323))])
178 ExtrusionCut_2_objects_1 = [model.selection("WIRE", GeomAPI_Pnt(-5.44557423035565, 0.2028301512488154, 4)), model.selection("WIRE", GeomAPI_Pnt(-3.298443178812729, 3.921770223029919, 4)), model.selection("WIRE", GeomAPI_Pnt(1.698443178812738, 3.921770223029927, 4)), model.selection("WIRE", GeomAPI_Pnt(3.845574230355639, 0.2028301512488117, 4))]
179 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_2_objects_1, model.selection(), 0, 0.75, [model.selection("SOLID", GeomAPI_Pnt(0.06663461012735418, 0.05143712897449785, 2.675990079155852))])
180 Axis_4 = model.addAxis(Part_1_doc, 0, -1, -10)
181 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", GeomAPI_Pnt(-0.45, 5, 4))], model.selection("EDGE", GeomAPI_Pnt(0, -0.5, -5)), 10, 10, [model.selection("SOLID", GeomAPI_Pnt(0.06614791498027658, 0.06612435067467369, 2.67762623401837))])
182 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", GeomAPI_Pnt(-2.14713105154291, -4.124600374278729, 4)), model.selection("FACE", GeomAPI_Pnt(2.14713105154291, -4.124600374278742, 4))], model.selection(), model.selection("FACE", GeomAPI_Pnt(0, 0, 0)), 0, model.selection(), 0)
183 Sketch_3 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
184 SketchLine_20 = Sketch_3.addLine(3.5, 2.508501119175777, 3.5, 4)
185 SketchLine_21 = Sketch_3.addLine(3.5, 4, 6.2, 4)
186 SketchConstraintCoincidence_35 = Sketch_3.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
187 SketchLine_22 = Sketch_3.addLine(6.2, 4, 6.2, 3.008501119175777)
188 SketchConstraintCoincidence_36 = Sketch_3.setCoincident(SketchLine_21.endPoint(), SketchLine_22.startPoint())
189 SketchLine_23 = Sketch_3.addLine(6.2, 3.008501119175777, 3.5, 2.508501119175777)
190 SketchConstraintCoincidence_37 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
191 SketchConstraintCoincidence_38 = Sketch_3.setCoincident(SketchLine_23.endPoint(), SketchLine_20.startPoint())
192 SketchConstraintVertical_3 = Sketch_3.setVertical(SketchLine_20.result())
193 SketchProjection_9 = Sketch_3.addProjection(model.selection("EDGE_9", GeomAPI_Pnt(3.5, 0, 1)), False)
194 SketchLine_24 = SketchProjection_9.createdFeature()
195 SketchConstraintCoincidence_39 = Sketch_3.setCoincident(SketchLine_20.startPoint(), SketchLine_24.result())
196 SketchProjection_10 = Sketch_3.addProjection(model.selection("EDGE_3", GeomAPI_Pnt(4.85, 0, 2.25)), False)
197 SketchLine_25 = SketchProjection_10.createdFeature()
198 SketchConstraintParallel_1 = Sketch_3.setParallel(SketchLine_23.result(), SketchLine_25.result())
199 SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_22.result())
200 SketchProjection_11 = Sketch_3.addProjection(model.selection("EDGE_9", GeomAPI_Pnt(6.2, 0, 3.25)), False)
201 SketchLine_26 = SketchProjection_11.createdFeature()
202 SketchConstraintCoincidence_40 = Sketch_3.setCoincident(SketchLine_23.startPoint(), SketchLine_26.result())
203 SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_21.result())
204 SketchConstraintDistance_3 = Sketch_3.setDistance(SketchLine_20.startPoint(), SketchLine_25.result(), 0.5, True)
205 SketchProjection_12 = Sketch_3.addProjection(model.selection("EDGE_5", GeomAPI_Pnt(3.1, 0, 4)), False)
206 SketchLine_27 = SketchProjection_12.createdFeature()
207 SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_20.endPoint(), SketchLine_27.result())
209 Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", GeomAPI_Pnt(4.850000000000001, 0, 3.254250559587889))], model.selection("EDGE", "PartSet/OZ"), 360, 0)
210 Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", GeomAPI_Pnt(-2.14713105154291, -4.124600374278729, 2)), model.selection("SOLID", GeomAPI_Pnt(2.14713105154291, -4.124600374278742, 2))], [model.selection("SOLID", GeomAPI_Pnt(-1.278142456973851e-15, 2.734224632526547e-16, 3.386836255166113))])
211 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", GeomAPI_Pnt(0.06552679693747457, 0.1115566065149892, 2.681859907222054))], [model.selection("SOLID", GeomAPI_Pnt(-2.134018078943279, -4.099410579753945, 3.358593616213623)), model.selection("SOLID", GeomAPI_Pnt(2.134018071503405, -4.099410583757958, 3.358593616233432))])
213 model.testHaveNamingSubshapes(Cut_1, model, Part_1_doc)
216 assert(model.checkPythonDump())
