src/FeaturesPlugin/Test/Test2419_1.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 model.addParameter(Part_1_doc, "length_assemblage", "10")
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(0, 60, 10, 60)
  29 SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OY"))
  30 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
  31 SketchLine_3 = Sketch_1.addLine(10, 60, 10, 40)
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
  33 SketchLine_4 = Sketch_1.addLine(10, 40, 20, 40)
  34 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  35 SketchLine_5 = Sketch_1.addLine(20, 40, 20, 20)
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  37 SketchLine_6 = Sketch_1.addLine(20, 20, 30, 20)
  38 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  39 SketchLine_7 = Sketch_1.addLine(30, 20, 30, 0)
  40 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  41 SketchLine_8 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
  42 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.result())
  43 SketchLine_9 = Sketch_1.addLine(30, 0, 81.26217508737108, 0)
  44 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_9.startPoint())
  45 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_8.result())
  46 SketchLine_10 = Sketch_1.addLine(0, 60, 0, 81.26217508737108)
  47 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_10.startPoint())
  48 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_2.result())
  49 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  50 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
  51 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
  52 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
  53 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
  54 SketchArc_1 = Sketch_1.addArc(4.151438510550382e-34, -3.089278765476956e-34, 81.26217508737108, 0, 0, 81.26217508737108, False)
  55 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchArc_1.center())
  56 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchArc_1.startPoint())
  57 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_2.result(), SketchArc_1.endPoint())
  58 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchArc_1.endPoint())
  59 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result())
  60 SketchArc_2 = Sketch_1.addArc(4.151438510550382e-34, -3.089278765476956e-34, 76.26217508737108, 0, 0, 76.26217508737108, False)
  61 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchArc_2.center())
  62 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_23")
  63 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_9.result(), SketchArc_2.startPoint())
  64 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_24")
  65 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_10.result(), SketchArc_2.endPoint())
  66 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_25")
  67 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_1.endPoint(), SketchArc_2.endPoint(), 5, False)
  68 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), "2*length_assemblage")
  69 SketchConstraintLength_1.setName("SketchConstraintLength_2")
  70 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_6.result(), "length_assemblage")
  71 SketchConstraintLength_2.setName("SketchConstraintLength_3")
  72 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_7.result())
  73 SketchConstraintEqual_1.setName("SketchConstraintEqual_2")
  74 SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_6.result(), SketchLine_4.result())
  75 SketchConstraintEqual_2.setName("SketchConstraintEqual_3")
  76 SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_3.result())
  77 SketchConstraintEqual_3.setName("SketchConstraintEqual_4")
  78 SketchConstraintEqual_4 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_1.result())
  79 SketchConstraintEqual_4.setName("SketchConstraintEqual_5")
  80 model.do()
  81 Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_9f-SketchArc_2_2f-SketchLine_10r_wire")])
  82 Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
  83 SketchLine_11 = Sketch_2.addLine(40, 0, 30, 0)
  84 SketchLine_12 = Sketch_2.addLine(30, 0, 30, 10)
  85 SketchLine_13 = Sketch_2.addLine(30, 10, 40, 10)
  86 SketchLine_14 = Sketch_2.addLine(40, 10, 40, 0)
  87 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
  88 SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_19")
  89 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  90 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_20")
  91 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  92 SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_21")
  93 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  94 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_26")
  95 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_11.result())
  96 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_12.result())
  97 SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_13.result())
  98 SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_14.result())
  99 SketchConstraintLength_3 = Sketch_2.setLength(SketchLine_13.result(), "length_assemblage")
 100 SketchConstraintLength_3.setName("SketchConstraintLength_1")
 101 SketchConstraintEqual_5 = Sketch_2.setEqual(SketchLine_13.result(), SketchLine_14.result())
 102 SketchConstraintEqual_5.setName("SketchConstraintEqual_1")
 103 model.do()
 104 Sketch_2.setName("Sketch_3")
 105 Sketch_2.result().setName("Sketch_3")
 106 Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_3/Face-SketchLine_14r-SketchLine_13r-SketchLine_12r-SketchLine_11r_wire")])
 107 Face_2.setName("Face_5")
 108 Face_2.result().setName("Face_5_1")
 109 LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Face_5_1")], model.selection("EDGE", "Sketch_1/SketchLine_9"), 10, 2)
 110 LinearCopy_1.result().setName("LinearCopy")
 111 Split_1 = model.addSplit(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("COMPOUND", "LinearCopy")])
 112 model.do()
 113 model.end()
 114
 115 from GeomAPI import  GeomAPI_Shape
 116
 117 model.testNbResults(Split_1, 1)
 118 model.testNbSubResults(Split_1, [3])
 119 model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [0])
 120 model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [3])
 121 model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [20])
 122 model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [40])
 123
 124 assert(model.checkPythonDump())