src/FeaturesPlugin/Test/Test2419_1.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 model.addParameter(Part_1_doc, "length_assemblage", "10")
  28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  29 SketchLine_1 = Sketch_1.addLine(0, 60, 10, 60)
  30 SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OY"))
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
  32 SketchLine_3 = Sketch_1.addLine(10, 60, 10, 40)
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
  34 SketchLine_4 = Sketch_1.addLine(10, 40, 20, 40)
  35 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  36 SketchLine_5 = Sketch_1.addLine(20, 40, 20, 20)
  37 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  38 SketchLine_6 = Sketch_1.addLine(20, 20, 30, 20)
  39 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  40 SketchLine_7 = Sketch_1.addLine(30, 20, 30, 0)
  41 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  42 SketchLine_8 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
  43 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.result())
  44 SketchLine_9 = Sketch_1.addLine(30, 0, 81.26217508737108, 0)
  45 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_9.startPoint())
  46 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_8.result())
  47 SketchLine_10 = Sketch_1.addLine(0, 60, 0, 81.26217508737108)
  48 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_10.startPoint())
  49 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_2.result())
  50 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  51 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
  52 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
  53 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
  54 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
  55 SketchArc_1 = Sketch_1.addArc(4.151438510550382e-034, -3.089278765476956e-034, 81.26217508737108, 0, 0, 81.26217508737108, False)
  56 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchArc_1.center())
  57 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchArc_1.startPoint())
  58 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_2.result(), SketchArc_1.endPoint())
  59 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchArc_1.endPoint())
  60 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result())
  61 SketchArc_2 = Sketch_1.addArc(4.151438510550382e-034, -3.089278765476956e-034, 76.26217508737108, 0, 0, 76.26217508737108, False)
  62 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchArc_2.center())
  63 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_23")
  64 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_9.result(), SketchArc_2.startPoint())
  65 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_24")
  66 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_10.result(), SketchArc_2.endPoint())
  67 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_25")
  68 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_1.endPoint(), SketchArc_2.endPoint(), 5, False)
  69 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), "2*length_assemblage")
  70 SketchConstraintLength_1.setName("SketchConstraintLength_2")
  71 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_6.result(), "length_assemblage")
  72 SketchConstraintLength_2.setName("SketchConstraintLength_3")
  73 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_7.result())
  74 SketchConstraintEqual_1.setName("SketchConstraintEqual_2")
  75 SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_6.result(), SketchLine_4.result())
  76 SketchConstraintEqual_2.setName("SketchConstraintEqual_3")
  77 SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_3.result())
  78 SketchConstraintEqual_3.setName("SketchConstraintEqual_4")
  79 SketchConstraintEqual_4 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_1.result())
  80 SketchConstraintEqual_4.setName("SketchConstraintEqual_5")
  81 model.do()
  82 Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_9f-SketchLine_10r-SketchArc_2_2f")])
  83 Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
  84 SketchLine_11 = Sketch_2.addLine(40, 0, 30, 0)
  85 SketchLine_12 = Sketch_2.addLine(30, 0, 30, 10)
  86 SketchLine_13 = Sketch_2.addLine(30, 10, 40, 10)
  87 SketchLine_14 = Sketch_2.addLine(40, 10, 40, 0)
  88 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
  89 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  90 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  91 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  92 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_26")
  93 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_11.result())
  94 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_12.result())
  95 SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_13.result())
  96 SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_14.result())
  97 SketchConstraintLength_3 = Sketch_2.setLength(SketchLine_13.result(), "length_assemblage")
  98 SketchConstraintLength_3.setName("SketchConstraintLength_1")
  99 SketchConstraintEqual_5 = Sketch_2.setEqual(SketchLine_13.result(), SketchLine_14.result())
 100 SketchConstraintEqual_5.setName("SketchConstraintEqual_1")
 101 model.do()
 102 Sketch_2.setName("Sketch_3")
 103 Sketch_2.result().setName("Sketch_3")
 104 Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_11r-SketchLine_12r-SketchLine_13r-SketchLine_14r")])
 105 Face_2.setName("Face_5")
 106 Face_2.result().setName("Face_5_1")
 107 LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Face_5_1")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_9"), 10, 2)
 108 LinearCopy_1.result().setName("LinearCopy")
 109 LinearCopy_1.result().subResult(0).setName("LinearCopy_1_1_1")
 110 LinearCopy_1.result().subResult(1).setName("LinearCopy_1_1_2")
 111 Boolean_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("COMPOUND", "LinearCopy")])
 112 model.end()
 113
 114 from GeomAPI import  GeomAPI_Shape
 115
 116 model.testNbResults(Boolean_1, 1)
 117 model.testNbSubResults(Boolean_1, [3])
 118 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.SOLID, [0])
 119 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.FACE, [3])
 120 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.EDGE, [20])
 121 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.VERTEX, [40])
 122
 123 assert(model.checkPythonDump())