1 # Copyright (C) 2014-2019 CEA/DEN, EDF R&D
3 # This library is free software; you can redistribute it and/or
4 # modify it under the terms of the GNU Lesser General Public
5 # License as published by the Free Software Foundation; either
6 # version 2.1 of the License, or (at your option) any later version.
8 # This library is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 # Lesser General Public License for more details.
13 # You should have received a copy of the GNU Lesser General Public
14 # License along with this library; if not, write to the Free Software
15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 # -*- coding: utf-8 -*-
23 from SketchAPI import *
25 from salome.shaper import model
28 partSet = model.moduleDocument()
29 Part_1 = model.addPart(partSet)
30 Part_1_doc = Part_1.document()
31 model.addParameter(Part_1_doc, "R", "58")
32 model.addParameter(Part_1_doc, "cote_cube", "R/2")
33 model.addParameter(Part_1_doc, "theta", "54")
34 model.addParameter(Part_1_doc, "phi", "36")
35 model.addParameter(Part_1_doc, "pi", "3.141592653589793")
36 model.addParameter(Part_1_doc, "x", "R*sin(phi/180*pi)*cos(theta/180*pi)")
37 model.addParameter(Part_1_doc, "y", "R*sin(phi/180*pi)*sin(theta/180*pi)")
38 model.addParameter(Part_1_doc, "z", "R*cos(phi/180*pi)")
39 model.addParameter(Part_1_doc, "haut_ext_tuyau", "5")
40 model.addParameter(Part_1_doc, "haut_int_tuyau", "14")
41 Param_Diam = model.addParameter(Part_1_doc, "diam_tuyau", "10")
42 Revolution_1 = model.addRevolution(Part_1_doc, [], model.selection("EDGE", "PartSet/OZ"), 90, 0)
43 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
44 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
45 SketchPoint_1 = SketchProjection_1.createdFeature()
46 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
47 SketchLine_1 = SketchProjection_2.createdFeature()
48 SketchArc_1 = Sketch_1.addArc(0, 0, 58, 0, 0, -58, True)
49 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
50 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.startPoint())
51 SketchLine_2 = Sketch_1.addLine(0, -58, 0, 0)
52 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_2.startPoint())
53 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_2.endPoint())
54 SketchLine_3 = Sketch_1.addLine(0, 0, 58, 0)
55 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
56 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.endPoint())
57 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
58 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), "R")
59 Revolution_1.setNestedSketch(Sketch_1)
60 Extrusion_1 = model.addExtrusion(Part_1_doc, [], model.selection(), 0, "cote_cube")
61 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_3"))
62 SketchLine_4 = Sketch_2.addLine(29, 0, 0, 0)
63 SketchLine_5 = Sketch_2.addLine(0, 0, 0, 29)
64 SketchLine_6 = Sketch_2.addLine(0, 29, 29, 29)
65 SketchLine_7 = Sketch_2.addLine(29, 29, 29, 0)
66 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_4.startPoint())
67 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
68 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
69 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
70 SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_4.result())
71 SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_5.result())
72 SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_6.result())
73 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_7.result())
74 SketchConstraintLength_2 = Sketch_2.setLength(SketchLine_6.result(), "cote_cube")
75 SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_6.result(), SketchLine_7.result())
76 SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "[Revolution_1_1/Generated_Face&Sketch_1/SketchLine_3][Revolution_1_1/To_Face]"), False)
77 SketchLine_8 = SketchProjection_3.createdFeature()
78 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_8.result())
79 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "[Revolution_1_1/Generated_Face&Sketch_1/SketchLine_3][Revolution_1_1/From_Face]"), False)
80 SketchLine_9 = SketchProjection_4.createdFeature()
81 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_9.result())
82 Extrusion_1.setNestedSketch(Sketch_2)
83 Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1")])
84 Point_2 = model.addPoint(Part_1_doc, "x", "y", "-z")
85 Axis_4 = model.addAxis(Part_1_doc, model.selection("VERTEX", "Point_1"), model.selection("VERTEX", "[Split_1_1_2/Modified_Face&Sketch_2/SketchLine_5&Revolution_1_1/To_Face][Split_1_1_2/Modified_Face&Sketch_2/SketchLine_4&Revolution_1_1/From_Face][Split_1_1_2/Modified_Face&Extrusion_1_1/To_Face&Sketch_1/SketchLine_3]"))
86 Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Point_1"), True)
87 Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), "haut_ext_tuyau", True)
88 Plane_5.result().setName("Plane_2 arrivee tuyau")
89 Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_6"), model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_6][Extrusion_1_1/From_Face]"), 45)
90 Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_7"), model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_7][Extrusion_1_1/From_Face]"), 45)
91 Plane_8 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_7"), model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_6][Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_7]"), "90+45")
92 Split_2 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Split_1_1_1")], [model.selection("FACE", "Plane_5")])
93 Split_3 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Split_2_1_2")], [model.selection("FACE", "Plane_3")])
94 Split_4 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Split_3_1_2")], [model.selection("FACE", "Plane_4")])
95 Split_4.result().setColor(102, 51, 51)
96 Split_4.result().subResult(0).setColor(153, 153, 76)
97 Split_4.result().subResult(1).setColor(0, 204, 204)
98 Split_4.result().subResult(2).setColor(51, 51, 102)
99 Split_4.result().subResult(3).setColor(102, 204, 102)
100 Split_4.result().subResult(4).setColor(204, 204, 0)
101 Union_1 = model.addUnion(Part_1_doc, [model.selection("SOLID", "Split_4_1_4"), model.selection("SOLID", "Split_4_1_2")])
102 Point_3 = model.addPoint(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("FACE", "Plane_2 arrivee tuyau"))
103 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2 arrivee tuyau"))
104 SketchProjection_5 = Sketch_3.addProjection(model.selection("VERTEX", "Point_2"), False)
105 SketchPoint_2 = SketchProjection_5.createdFeature()
106 SketchCircle_1 = Sketch_3.addCircle(0, 0, 10)
107 SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchPoint_2.result(), SketchCircle_1.center())
108 SketchConstraintRadius_1 = Sketch_3.setRadius(SketchCircle_1.results()[1], "diam_tuyau")
109 SketchLine_10 = Sketch_3.addLine(-5, 5, 5, 5)
110 SketchLine_11 = Sketch_3.addLine(5, 5, 5, -5)
111 SketchLine_12 = Sketch_3.addLine(5, -5, -5, -5)
112 SketchLine_13 = Sketch_3.addLine(-5, -5, -5, 5)
113 SketchConstraintCoincidence_14 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_10.startPoint())
114 SketchConstraintCoincidence_15 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
115 SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
116 SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
117 SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_10.result())
118 SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_11.result())
119 SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_12.result())
120 SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_13.result())
121 SketchConstraintEqual_2 = Sketch_3.setEqual(SketchLine_10.result(), SketchLine_13.result())
122 SketchLine_14 = Sketch_3.addLine(5, 5, 7.071067811865479, 7.071067811865475)
123 SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_14.startPoint())
124 SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_14.endPoint(), SketchCircle_1.results()[1])
125 SketchLine_15 = Sketch_3.addLine(-5, -5, -7.071067811865472, -7.071067811865476)
126 SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_15.startPoint())
127 SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchLine_15.endPoint(), SketchCircle_1.results()[1])
128 SketchConstraintCollinear_1 = Sketch_3.setCollinear(SketchLine_14.result(), SketchLine_15.result())
129 SketchLine_16 = Sketch_3.addLine(7.071067811865478, -7.071067811865476, 5, -5)
130 SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchLine_16.startPoint(), SketchCircle_1.results()[1])
131 SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_16.endPoint())
132 SketchLine_17 = Sketch_3.addLine(-5, 5, -7.071067811865472, 7.071067811865476)
133 SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_10.startPoint(), SketchLine_17.startPoint())
134 SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_17.endPoint(), SketchCircle_1.results()[1])
135 SketchConstraintCollinear_2 = Sketch_3.setCollinear(SketchLine_17.result(), SketchLine_16.result())
136 SketchConstraintEqual_3 = Sketch_3.setEqual(SketchLine_14.result(), SketchLine_15.result())
137 SketchConstraintEqual_4 = Sketch_3.setEqual(SketchLine_17.result(), SketchLine_16.result())
138 SketchConstraintLength_3 = Sketch_3.setLength(SketchLine_10.result(), "diam_tuyau")
140 Extrusion_2_objects = [model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_14r-SketchLine_11f-SketchLine_16r"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchCircle_1_2f-SketchLine_17r-SketchLine_10f-SketchLine_14f"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_15r-SketchLine_13f-SketchLine_17f"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_16f-SketchLine_12f-SketchLine_15f")]
141 Extrusion_2 = model.addExtrusion(Part_1_doc, Extrusion_2_objects, model.selection(), 10, 0)
142 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_13r-SketchLine_12r-SketchLine_11r-SketchLine_10r")], model.selection(), "haut_int_tuyau", 0)
143 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1_3/To_Face"))
144 SketchProjection_6 = Sketch_4.addProjection(model.selection("VERTEX", "[Extrusion_2_1_3/Generated_Face&Sketch_3/SketchCircle_1_2][Extrusion_2_1_3/Generated_Face&Sketch_3/SketchLine_15][Extrusion_2_1_3/To_Face]"), False)
145 SketchPoint_3 = SketchProjection_6.createdFeature()
146 SketchProjection_7 = Sketch_4.addProjection(model.selection("VERTEX", "[Extrusion_2_1_2/Generated_Face&Sketch_3/SketchCircle_1_2&weak_name_1][Extrusion_2_1_2/Generated_Face&Sketch_3/SketchLine_17][Extrusion_2_1_2/To_Face]"), False)
147 SketchPoint_4 = SketchProjection_7.createdFeature()
148 SketchArc_2 = Sketch_4.addArc(0, 0, -7.071067811865476, -7.071067811865472, 7.071067811865476, 7.071067811865472, True)
149 SketchConstraintCoincidence_26 = Sketch_4.setCoincident(SketchPoint_3.result(), SketchArc_2.startPoint())
150 SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchPoint_4.result(), SketchArc_2.results()[1])
151 SketchLine_18 = Sketch_4.addLine(7.071067811865476, 7.071067811865472, -7.071067811865476, -7.071067811865472)
152 SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchArc_2.endPoint(), SketchLine_18.startPoint())
153 SketchConstraintCoincidence_29 = Sketch_4.setCoincident(SketchAPI_Point(SketchPoint_3).coordinates(), SketchLine_18.endPoint())
154 SketchProjection_8 = Sketch_4.addProjection(model.selection("VERTEX", "[Extrusion_2_1_1/Generated_Face&Sketch_3/SketchCircle_1_2][Extrusion_2_1_1/Generated_Face&Sketch_3/SketchLine_14][Extrusion_2_1_1/To_Face]"), False)
155 SketchPoint_5 = SketchProjection_8.createdFeature()
156 SketchConstraintCoincidence_30 = Sketch_4.setCoincident(SketchArc_2.endPoint(), SketchAPI_Point(SketchPoint_5).coordinates())
158 Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchArc_2_2f-SketchLine_18r")], model.selection("EDGE", "Sketch_4/SketchLine_18"), 0, 180)
159 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_2_1")], [model.selection("SOLID", "Extrusion_3_1")])
160 Cut_1.result().setName("demi-sphere")
161 Plane_9 = model.addPlane(Part_1_doc, model.selection("VERTEX", "[Extrusion_2_1_1/Generated_Face&Sketch_3/SketchLine_11][Extrusion_2_1_1/Generated_Face&Sketch_3/SketchLine_16][Extrusion_2_1_1/From_Face]"), model.selection("VERTEX", "[Extrusion_2_1_1/Generated_Face&Sketch_3/SketchLine_11][Extrusion_2_1_1/Generated_Face&Sketch_3/SketchLine_16][Extrusion_2_1_1/To_Face]"), model.selection("VERTEX", "[Extrusion_2_1_1/Generated_Face&Sketch_3/SketchCircle_1_2][Extrusion_2_1_1/Generated_Face&Sketch_3/SketchLine_16][Extrusion_2_1_1/To_Face]"))
162 Plane_10 = model.addPlane(Part_1_doc, model.selection("VERTEX", "[Extrusion_2_1_1/Generated_Face&Sketch_3/SketchLine_14][Extrusion_2_1_1/Generated_Face&Sketch_3/SketchLine_11][Extrusion_2_1_1/To_Face]"), model.selection("VERTEX", "[Extrusion_2_1_1/Generated_Face&Sketch_3/SketchCircle_1_2][Extrusion_2_1_1/Generated_Face&Sketch_3/SketchLine_14][Extrusion_2_1_1/To_Face]"), model.selection("VERTEX", "[Extrusion_2_1_1/Generated_Face&Sketch_3/SketchCircle_1_2][Extrusion_2_1_1/Generated_Face&Sketch_3/SketchLine_14][Extrusion_2_1_1/From_Face]"))
163 Plane_11 = model.addPlane(Part_1_doc, model.selection("VERTEX", "[Extrusion_2_1_2/Generated_Face&Sketch_3/SketchCircle_1_2&weak_name_1][Extrusion_2_1_2/Generated_Face&Sketch_3/SketchLine_17][Extrusion_2_1_2/To_Face]"), model.selection("VERTEX", "[Extrusion_2_1_2/Generated_Face&Sketch_3/SketchLine_17][Extrusion_2_1_2/Generated_Face&Sketch_3/SketchLine_10][Extrusion_2_1_2/To_Face]"), model.selection("VERTEX", "[Extrusion_2_1_2/Generated_Face&Sketch_3/SketchCircle_1_2&weak_name_1][Extrusion_2_1_2/Generated_Face&Sketch_3/SketchLine_17][Extrusion_2_1_2/From_Face]"))
164 Plane_12 = model.addPlane(Part_1_doc, model.selection("VERTEX", "[Extrusion_2_1_3/Generated_Face&Sketch_3/SketchLine_15][Extrusion_2_1_3/Generated_Face&Sketch_3/SketchLine_13][Extrusion_2_1_3/To_Face]"), model.selection("VERTEX", "[Extrusion_2_1_3/Generated_Face&Sketch_3/SketchCircle_1_2][Extrusion_2_1_3/Generated_Face&Sketch_3/SketchLine_15][Extrusion_2_1_3/To_Face]"), model.selection("VERTEX", "[Extrusion_2_1_3/Generated_Face&Sketch_3/SketchCircle_1_2][Extrusion_2_1_3/Generated_Face&Sketch_3/SketchLine_15][Extrusion_2_1_3/From_Face]"))
165 Recover_1 = model.addRecover(Part_1_doc, Cut_1, [Extrusion_3.result()])
166 Plane_13 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Modified_Face&Sketch_3/SketchLine_10"), model.selection("EDGE", "[Recover_1_1/Modified_Face&Sketch_3/SketchLine_10][Recover_1_1/Modified_Face&Extrusion_3_1/To_Face]"), "90+45")
167 Plane_14 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Modified_Face&Sketch_3/SketchLine_13"), model.selection("EDGE", "[Recover_1_1/Modified_Face&Sketch_3/SketchLine_13][Recover_1_1/Modified_Face&Extrusion_3_1/To_Face]"), "90+45")
168 Plane_15 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Modified_Face&Sketch_3/SketchLine_12"), model.selection("EDGE", "[Recover_1_1/Modified_Face&Sketch_3/SketchLine_12][Recover_1_1/Modified_Face&Extrusion_3_1/To_Face]"), "90+45")
169 Plane_16 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Modified_Face&Extrusion_3_1/To_Face"), model.selection("EDGE", "[Recover_1_1/Modified_Face&Sketch_3/SketchLine_11][Recover_1_1/Modified_Face&Extrusion_3_1/To_Face]"), 45)
170 Split_5_objects_2 = [model.selection("FACE", "Plane_6"), model.selection("FACE", "Plane_7"), model.selection("FACE", "Plane_8"), model.selection("FACE", "Plane_9"), model.selection("FACE", "Plane_10"), model.selection("FACE", "Plane_11"), model.selection("FACE", "Plane_12"), model.selection("FACE", "Plane_13")]
171 Split_5 = model.addSplit(Part_1_doc, [model.selection("SOLID", "demi-sphere")], Split_5_objects_2)
172 Split_5.result().subResult(0).setName("Split_5_1_1")
173 Split_5.result().subResult(1).setName("Split_5_1_2")
174 Split_5.result().subResult(2).setName("Split_5_1_3")
175 Split_5.result().subResult(3).setName("Split_5_1_4")
176 Split_5.result().subResult(4).setName("Split_5_1_5")
177 Split_5.result().subResult(5).setName("Split_5_1_6")
178 Split_5.result().subResult(6).setName("Split_5_1_7")
179 Split_5.result().subResult(7).setName("Split_5_1_8")
180 Split_5.result().subResult(8).setName("Split_5_1_9")
181 Split_5.result().subResult(9).setName("Split_5_1_10")
182 Split_5.result().subResult(10).setName("Split_5_1_11")
183 Split_5.result().subResult(11).setName("Split_5_1_12")
184 Split_5.result().subResult(12).setName("Split_5_1_13")
185 Split_5.result().subResult(13).setName("Split_5_1_14")
186 Split_5.result().subResult(14).setName("Split_5_1_15")
187 Split_5.result().subResult(15).setName("Split_5_1_16")
188 Union_2_objects = [model.selection("SOLID", "Split_5_1_14"), model.selection("SOLID", "Split_5_1_15"), model.selection("SOLID", "Split_5_1_16")]
189 Union_2 = model.addUnion(Part_1_doc, Union_2_objects)
190 Union_2.result().subResult(0).setName("Union_2_1_1")
191 Union_2.result().subResult(1).setName("Union_2_1_2")
192 Union_2.result().subResult(2).setName("Union_2_1_3")
193 Union_2.result().subResult(3).setName("Union_2_1_4")
194 Union_2.result().subResult(4).setName("Union_2_1_5")
195 Union_2.result().subResult(5).setName("Union_2_1_6")
196 Union_2.result().subResult(6).setName("Union_2_1_7")
197 Union_2.result().subResult(7).setName("Union_2_1_8")
198 Union_2.result().subResult(8).setName("Union_2_1_9")
199 Union_2.result().subResult(9).setName("Union_2_1_10")
200 Union_2.result().subResult(10).setName("Union_2_1_11")
201 Union_2.result().subResult(11).setName("Union_2_1_12")
202 Union_2.result().subResult(12).setName("Union_2_1_13")
203 Union_2.result().subResult(13).setName("Union_2_1_14")
204 Union_3_objects = [model.selection("SOLID", "Union_2_1_8"), model.selection("SOLID", "Union_2_1_4"), model.selection("SOLID", "Union_2_1_9"), model.selection("SOLID", "Union_2_1_11")]
205 Union_3 = model.addUnion(Part_1_doc, Union_3_objects)
206 Union_3.result().subResult(0).setName("Union_3_1_1")
207 Union_3.result().subResult(1).setName("Union_3_1_2")
208 Union_3.result().subResult(2).setName("Union_3_1_3")
209 Union_3.result().subResult(3).setName("Union_3_1_4")
210 Union_3.result().subResult(4).setName("Union_3_1_5")
211 Union_3.result().subResult(5).setName("Union_3_1_6")
212 Union_3.result().subResult(6).setName("Union_3_1_7")
213 Union_3.result().subResult(7).setName("Union_3_1_8")
214 Union_3.result().subResult(8).setName("Union_3_1_9")
215 Union_3.result().subResult(9).setName("Union_3_1_10")
216 Union_3.result().subResult(10).setName("Union_3_1_11")
217 Union_4_objects = [model.selection("SOLID", "Union_3_1_5"), model.selection("SOLID", "Union_3_1_7"), model.selection("SOLID", "Union_3_1_9")]
218 Union_4 = model.addUnion(Part_1_doc, Union_4_objects)
219 Union_4.result().subResult(0).setName("Union_4_1_1")
220 Union_4.result().subResult(1).setName("Union_4_1_2")
221 Union_4.result().subResult(2).setName("Union_4_1_3")
222 Union_4.result().subResult(3).setName("Union_4_1_4")
223 Union_4.result().subResult(4).setName("Union_4_1_5")
224 Union_4.result().subResult(5).setName("Union_4_1_6")
225 Union_4.result().subResult(6).setName("Union_4_1_7")
226 Union_4.result().subResult(7).setName("Union_4_1_8")
227 Union_4.result().subResult(8).setName("Union_4_1_9")
228 Union_5_objects = [model.selection("SOLID", "Union_4_1_2"), model.selection("SOLID", "Union_4_1_1"), model.selection("SOLID", "Union_4_1_3")]
229 Union_5 = model.addUnion(Part_1_doc, Union_5_objects)
230 Union_5.result().subResult(0).setName("Union_5_1_1")
231 Union_5.result().subResult(1).setName("Union_5_1_2")
232 Union_5.result().subResult(2).setName("Union_5_1_3")
233 Union_5.result().subResult(3).setName("Union_5_1_4")
234 Union_5.result().subResult(4).setName("Union_5_1_5")
235 Union_5.result().subResult(5).setName("Union_5_1_6")
236 Union_5.result().subResult(6).setName("Union_5_1_7")
237 Union_6_objects = [model.selection("SOLID", "Union_5_1_1"), model.selection("SOLID", "Union_5_1_2"), model.selection("SOLID", "Union_5_1_3")]
238 Union_6 = model.addUnion(Part_1_doc, Union_6_objects)
239 Union_6.result().setColor(0, 0, 204)
240 Union_6.result().subResult(0).setName("Union_6_1_1")
241 Union_6.result().subResult(0).setColor(204, 102, 102)
242 Union_6.result().subResult(1).setName("Union_6_1_2")
243 Union_6.result().subResult(1).setColor(127, 254, 127)
244 Union_6.result().subResult(2).setName("Union_6_1_3")
245 Union_6.result().subResult(2).setColor(102, 51, 102)
246 Union_6.result().subResult(3).setName("Union_6_1_4")
247 Union_6.result().subResult(3).setColor(76, 76, 153)
248 Union_6.result().subResult(4).setName("Union_6_1_5")
249 Union_6.result().subResult(4).setColor(0, 0, 254)
250 Partition_1_objects = [model.selection("SOLID", "Recover_1_1"), model.selection("COMPSOLID", "Union_1_1"), model.selection("COMPSOLID", "Extrusion_2_1"), model.selection("COMPSOLID", "demi-sphere")]
251 Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects)
252 Partition_1.result().setColor(102, 0, 0)
253 Partition_1.result().subResult(0).setColor(255, 255, 0)
254 Partition_1.result().subResult(1).setColor(0, 254, 0)
255 Partition_1.result().subResult(2).setColor(0, 255, 255)
256 Partition_1.result().subResult(3).setColor(255, 85, 0)
257 Partition_1.result().subResult(4).setColor(153, 0, 0)
258 Partition_1.result().subResult(5).setColor(254, 0, 254)
259 Partition_1.result().subResult(6).setColor(127, 127, 254)
260 Partition_1.result().subResult(7).setColor(102, 204, 102)
261 Partition_1.result().subResult(8).setColor(127, 254, 127)
262 Partition_1.result().subResult(9).setColor(153, 153, 76)
263 Partition_1.result().subResult(10).setColor(204, 102, 102)
264 Partition_1.result().subResult(11).setColor(127, 254, 254)
265 Partition_1.result().subResult(12).setColor(255, 255, 0)
266 Partition_1.result().subResult(13).setColor(102, 51, 102)
267 Partition_1.result().subResult(14).setColor(102, 204, 204)
268 Partition_1.result().subResult(15).setColor(254, 127, 254)
269 Partition_1.result().subResult(16).setColor(153, 153, 0)
270 Partition_1.result().subResult(17).setColor(153, 153, 0)
271 Partition_1.result().subResult(18).setColor(204, 0, 204)
272 Folder_1 = model.addFolder(Part_1_doc, Revolution_1, Union_1)
273 Folder_2 = model.addFolder(Part_1_doc, Point_3, Union_6)
277 model.testNbResults(Partition_1, 1)
278 model.testNbSubResults(Partition_1, [19])
279 model.testNbSubShapes(Partition_1, GeomAPI_Shape.SOLID, [19])
280 model.testNbSubShapes(Partition_1, GeomAPI_Shape.FACE, [199])
281 model.testNbSubShapes(Partition_1, GeomAPI_Shape.EDGE, [814])
282 model.testNbSubShapes(Partition_1, GeomAPI_Shape.VERTEX, [1628])
283 model.testResultsVolumes(Partition_1, [103867.289635450288187712430953979])
285 # change parameter and check validity of the result
286 Param_Diam.setValue(8)
289 model.testNbResults(Partition_1, 1)
290 model.testNbSubResults(Partition_1, [19])
291 model.testNbSubShapes(Partition_1, GeomAPI_Shape.SOLID, [19])
292 model.testNbSubShapes(Partition_1, GeomAPI_Shape.FACE, [191])
293 model.testNbSubShapes(Partition_1, GeomAPI_Shape.EDGE, [744])
294 model.testNbSubShapes(Partition_1, GeomAPI_Shape.VERTEX, [1488])
295 model.testResultsVolumes(Partition_1, [103221.354557478349306620657444])
300 #assert(model.checkPythonDump())
