1 ## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
3 ## This library is free software; you can redistribute it and/or
4 ## modify it under the terms of the GNU Lesser General Public
5 ## License as published by the Free Software Foundation; either
6 ## version 2.1 of the License, or (at your option) any later version.
8 ## This library is distributed in the hope that it will be useful,
9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 ## Lesser General Public License for more details.
13 ## You should have received a copy of the GNU Lesser General Public
14 ## License along with this library; if not, write to the Free Software
15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 ## See http:##www.salome-platform.org/ or
18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
21 from SketchAPI import *
23 from salome.shaper import model
26 partSet = model.moduleDocument()
27 Part_1 = model.addPart(partSet)
28 Part_1_doc = Part_1.document()
29 model.addParameter(Part_1_doc, "angle", "27.5")
30 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
31 SketchLine_1 = Sketch_1.addLine(0, 4, 6.2, 4)
32 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
33 SketchLine_2 = SketchProjection_1.createdFeature()
34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
35 SketchLine_3 = Sketch_1.addLine(6.2, 4, 6.2, 2.5)
36 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
37 SketchLine_4 = Sketch_1.addLine(6.2, 2.5, 3.5, 2)
38 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
39 SketchLine_5 = Sketch_1.addLine(3.5, 2, 3.5, 0)
40 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
41 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
42 SketchLine_6 = SketchProjection_2.createdFeature()
43 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
44 SketchLine_7 = Sketch_1.addLine(3.5, 0, 0, 0)
45 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
46 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_7.endPoint())
47 SketchLine_8 = Sketch_1.addLine(0, 4, 0, 0)
48 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_8.startPoint())
49 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_8.endPoint())
50 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_5.result())
51 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_3.result())
52 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
53 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 6.2)
54 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_7.result(), 3.5)
55 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_5.result(), 2)
56 SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_3.result(), 1.5)
57 SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_8.result(), 4)
59 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_3r-SketchLine_4r-SketchLine_5r-SketchLine_7r-SketchLine_8f")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
60 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_1"))
61 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Revolution_1_1/Generated_Face_2&Revolution_1_1/Generated_Face_1__cc"), False)
62 SketchPoint_1 = SketchProjection_3.createdFeature()
63 SketchCircle_1 = Sketch_2.addCircle(0, 0, 4.75)
64 SketchCircle_1.setAuxiliary(True)
65 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
66 SketchCircle_2 = Sketch_2.addCircle(4.113620667976081, 2.375000000000003, 1.1)
67 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_2.center())
68 SketchCircle_3 = Sketch_2.addCircle(-4.113620667974014, 2.375000000003604, 1.1)
69 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_3.center())
70 SketchCircle_4 = Sketch_2.addCircle(4.163806340121522e-012, -4.75000000000001, 1.1)
71 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_4.center())
72 SketchConstraintEqual_1 = Sketch_2.setEqual(SketchCircle_2.results()[1], SketchCircle_3.results()[1])
73 SketchConstraintEqual_2 = Sketch_2.setEqual(SketchCircle_3.results()[1], SketchCircle_4.results()[1])
74 SketchLine_9 = Sketch_2.addLine(0, 0, 4.113620667976081, 2.375000000000003)
75 SketchLine_9.setAuxiliary(True)
76 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_9.startPoint())
77 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchCircle_2.center(), SketchLine_9.endPoint())
78 SketchLine_10 = Sketch_2.addLine(-4.113620667974014, 2.375000000003604, 0, 0)
79 SketchLine_10.setAuxiliary(True)
80 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchCircle_3.center(), SketchLine_10.startPoint())
81 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_10.endPoint())
82 SketchLine_11 = Sketch_2.addLine(4.163806340121522e-012, -4.75000000000001, 0, 0)
83 SketchLine_11.setAuxiliary(True)
84 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchCircle_4.center(), SketchLine_11.startPoint())
85 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_11.endPoint())
86 SketchConstraintRadius_1 = Sketch_2.setRadius(SketchCircle_2.results()[1], 1.1)
87 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), False)
88 SketchLine_12 = SketchProjection_4.createdFeature()
89 SketchConstraintAngle_1 = Sketch_2.setAngleBackward(SketchLine_9.result(), SketchLine_12.result(), 30.00000000000006)
90 SketchConstraintAngle_2 = Sketch_2.setAngle(SketchLine_9.result(), SketchLine_10.result(), 119.9999999999498)
91 SketchConstraintAngle_3 = Sketch_2.setAngle(SketchLine_10.result(), SketchLine_11.result(), 120.0000000001004)
92 SketchConstraintLength_6 = Sketch_2.setLength(SketchLine_9.result(), 4.75)
93 SketchCircle_5 = Sketch_2.addCircle(2.552173139647412, 4.006109367611208, 0.65)
94 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_5.center())
95 SketchCircle_6 = Sketch_2.addCircle(2.552173139647412, 4.006109367611208, 0.8)
96 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_6.center())
97 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchCircle_5.center(), SketchCircle_6.center())
98 SketchCircle_7 = Sketch_2.addCircle(4.745479052513824, 0.20719208998535, 0.65)
99 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_7.center())
100 SketchCircle_8 = Sketch_2.addCircle(4.745479052513824, 0.20719208998535, 0.8)
101 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_8.center())
102 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchCircle_7.center(), SketchCircle_8.center())
103 SketchLine_13 = Sketch_2.addLine(0, 0, 2.552173139647412, 4.006109367611208)
104 SketchLine_13.setAuxiliary(True)
105 SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_13.startPoint())
106 SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchCircle_5.center(), SketchLine_13.endPoint())
107 SketchLine_14 = Sketch_2.addLine(0, 0, 4.745479052513824, 0.20719208998535)
108 SketchLine_14.setAuxiliary(True)
109 SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_14.startPoint())
110 SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchCircle_7.center(), SketchLine_14.endPoint())
111 SketchConstraintEqual_3 = Sketch_2.setEqual(SketchCircle_7.results()[1], SketchCircle_5.results()[1])
112 SketchConstraintEqual_4 = Sketch_2.setEqual(SketchCircle_8.results()[1], SketchCircle_6.results()[1])
113 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_7.results()[1], 0.65)
114 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_8.results()[1], 0.8)
115 SketchCircle_9 = Sketch_2.addCircle(-2.552173139482203, 4.006109367717388, 0.65)
116 SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_9.center())
117 SketchCircle_10 = Sketch_2.addCircle(-4.745479052513825, 0.2071920899853395, 0.65)
118 SketchConstraintCoincidence_31 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_10.center())
119 SketchCircle_11 = Sketch_2.addCircle(-2.552173139482203, 4.006109367717388, 0.8)
120 SketchConstraintCoincidence_32 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_11.center())
121 SketchCircle_12 = Sketch_2.addCircle(-4.745479052513825, 0.2071920899853395, 0.8)
122 SketchConstraintCoincidence_33 = Sketch_2.setCoincident(SketchCircle_10.center(), SketchCircle_12.center())
123 SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchCircle_9.center(), SketchCircle_11.center())
124 SketchConstraintEqual_5 = Sketch_2.setEqual(SketchCircle_6.results()[1], SketchCircle_11.results()[1])
125 SketchConstraintEqual_6 = Sketch_2.setEqual(SketchCircle_5.results()[1], SketchCircle_9.results()[1])
126 SketchConstraintEqual_7 = Sketch_2.setEqual(SketchCircle_9.results()[1], SketchCircle_10.results()[1])
127 SketchConstraintEqual_8 = Sketch_2.setEqual(SketchCircle_11.results()[1], SketchCircle_12.results()[1])
128 SketchLine_15 = Sketch_2.addLine(-2.552173139482203, 4.006109367717388, 0, 0)
129 SketchLine_15.setAuxiliary(True)
130 SketchConstraintCoincidence_35 = Sketch_2.setCoincident(SketchCircle_9.center(), SketchLine_15.startPoint())
131 SketchConstraintCoincidence_36 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_15.endPoint())
132 SketchLine_16 = Sketch_2.addLine(-4.745479052513825, 0.2071920899853395, 0, 0)
133 SketchLine_16.setAuxiliary(True)
134 SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchCircle_10.center(), SketchLine_16.startPoint())
135 SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_16.endPoint())
136 SketchCircle_13 = Sketch_2.addCircle(-2.193305912870557, -4.213301457594897, 0.8)
137 SketchConstraintCoincidence_39 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_13.center())
138 SketchCircle_14 = Sketch_2.addCircle(2.193305912973027, -4.213301457541542, 0.8)
139 SketchConstraintCoincidence_40 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_14.center())
140 SketchConstraintEqual_9 = Sketch_2.setEqual(SketchCircle_14.results()[1], SketchCircle_13.results()[1])
141 SketchConstraintEqual_10 = Sketch_2.setEqual(SketchCircle_12.results()[1], SketchCircle_13.results()[1])
142 SketchLine_17 = Sketch_2.addLine(0, 0, -2.193305912870557, -4.213301457594897)
143 SketchLine_17.setAuxiliary(True)
144 SketchConstraintCoincidence_41 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_17.startPoint())
145 SketchConstraintCoincidence_42 = Sketch_2.setCoincident(SketchCircle_13.center(), SketchLine_17.endPoint())
146 SketchLine_18 = Sketch_2.addLine(0, 0, 2.193305912973027, -4.213301457541542)
147 SketchLine_18.setAuxiliary(True)
148 SketchConstraintCoincidence_43 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_18.startPoint())
149 SketchConstraintCoincidence_44 = Sketch_2.setCoincident(SketchCircle_14.center(), SketchLine_18.endPoint())
150 SketchConstraintAngle_4 = Sketch_2.setAngleBackward(SketchLine_9.result(), SketchLine_14.result(), "angle")
151 SketchConstraintAngle_5 = Sketch_2.setAngle(SketchLine_9.result(), SketchLine_13.result(), "angle")
152 SketchConstraintAngle_6 = Sketch_2.setAngleBackward(SketchLine_10.result(), SketchLine_15.result(), "angle")
153 SketchConstraintAngle_7 = Sketch_2.setAngleBackward(SketchLine_16.result(), SketchLine_10.result(), "angle")
154 SketchConstraintAngle_8 = Sketch_2.setAngle(SketchLine_17.result(), SketchLine_11.result(), "angle")
155 SketchConstraintAngle_9 = Sketch_2.setAngle(SketchLine_11.result(), SketchLine_18.result(), "angle")
156 SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
157 SketchLine_19 = SketchProjection_5.createdFeature()
158 SketchCircle_15 = Sketch_2.addCircle(0, 5, 0.45)
159 SketchConstraintCoincidence_45 = Sketch_2.setCoincident(SketchLine_19.result(), SketchCircle_15.center())
160 SketchConstraintRadius_4 = Sketch_2.setRadius(SketchCircle_15.results()[1], 0.45)
161 SketchLine_20 = Sketch_2.addLine(0, 0, 4.385635518227006, -2.793957963403483)
162 SketchLine_20.setAuxiliary(True)
163 SketchConstraintCoincidence_46 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_20.startPoint())
164 SketchCircle_16 = Sketch_2.addCircle(3.373565783251674, -2.149198433387089, 0.3)
165 SketchConstraintCoincidence_47 = Sketch_2.setCoincident(SketchLine_20.result(), SketchCircle_16.center())
166 SketchCircle_17 = Sketch_2.addCircle(4.385635518227006, -2.793957963403483, 0.5)
167 SketchConstraintCoincidence_48 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchCircle_17.center())
168 SketchConstraintRadius_5 = Sketch_2.setRadius(SketchCircle_16.results()[1], 0.3)
169 SketchConstraintRadius_6 = Sketch_2.setRadius(SketchCircle_17.results()[1], 0.5)
170 SketchConstraintAngle_10 = Sketch_2.setAngleBackward(SketchLine_14.result(), SketchLine_20.result(), 35.00000000000006)
171 SketchConstraintDistance_1 = Sketch_2.setDistance(SketchCircle_15.center(), SketchLine_12.result(), 5, True)
172 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchCircle_16.center(), SketchAPI_Line(SketchLine_19).startPoint(), 4, True)
173 SketchConstraintDistance_3 = Sketch_2.setDistance(SketchAPI_Line(SketchLine_19).startPoint(), SketchCircle_17.center(), 5.2, True)
175 ExtrusionCut_1_objects_1 = [model.selection("FACE", "Sketch_2/Face-SketchCircle_9_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_10_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_17_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_16_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f")]
176 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_1_objects_1, model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
177 ExtrusionCut_2_objects_1 = [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_11_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_12_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_6_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_8_2f")]
178 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_2_objects_1, model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_1_1")])
179 Axis_4 = model.addAxis(Part_1_doc, 0, -1, -10)
180 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_15_2f")], model.selection("EDGE", "Axis_1"), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
181 ExtrusionCut_3.result().setDeflection(1e-005)
182 Sketch_3 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
183 SketchLine_21 = Sketch_3.addLine(3.5, 2.508501119175777, 3.5, 4.934853156880259)
184 SketchLine_22 = Sketch_3.addLine(3.5, 4.934853156880259, 6.2, 4.934853156880259)
185 SketchConstraintCoincidence_49 = Sketch_3.setCoincident(SketchLine_21.endPoint(), SketchLine_22.startPoint())
186 SketchLine_23 = Sketch_3.addLine(6.2, 4.934853156880259, 6.2, 3.008501119175777)
187 SketchConstraintCoincidence_50 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
188 SketchProjection_6 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), False)
189 SketchLine_24 = SketchProjection_6.createdFeature()
190 SketchConstraintCoincidence_51 = Sketch_3.setCoincident(SketchLine_23.endPoint(), SketchLine_24.result())
191 SketchLine_25 = Sketch_3.addLine(6.2, 3.008501119175777, 3.5, 2.508501119175777)
192 SketchConstraintCoincidence_52 = Sketch_3.setCoincident(SketchLine_23.endPoint(), SketchLine_25.startPoint())
193 SketchConstraintCoincidence_53 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_25.endPoint())
194 SketchProjection_7 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_5"), False)
195 SketchLine_26 = SketchProjection_7.createdFeature()
196 SketchConstraintCoincidence_54 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_26.result())
197 SketchConstraintCoincidence_55 = Sketch_3.setCoincident(SketchLine_21.endPoint(), SketchLine_26.result())
198 SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_22.result())
199 SketchConstraintCoincidence_56 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_24.result())
200 SketchProjection_8 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), False)
201 SketchLine_27 = SketchProjection_8.createdFeature()
202 SketchConstraintParallel_1 = Sketch_3.setParallel(SketchLine_25.result(), SketchLine_27.result())
203 SketchProjection_9 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), False)
204 SketchLine_28 = SketchProjection_9.createdFeature()
205 SketchConstraintDistance_4 = Sketch_3.setDistance(SketchLine_21.startPoint(), SketchLine_28.result(), 0.5, True)
207 Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
208 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_13_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_14_2f")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 0, model.selection(), 0)
209 Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_2_1")])
210 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_3_1")], [model.selection("SOLID", "Common_1_1"), model.selection("SOLID", "Common_1_2")])
211 # skip 3 vertices, limitation
212 Group_1_objects = [model.selection("VERTEX", "Revolution_1_1/Generated_Face_5&Revolution_1_1/Generated_Face_4"), model.selection("VERTEX", "Revolution_1_1/Generated_Face_4&ExtrusionCut_3_1/Modfied_2"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_2&Revolution_1_1/Generated_Face_2"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_1_1/Modfied_4"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_2_1/Modfied_2"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_3_1/Modfied_3"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_2_1/Modfied_4"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_2_1/Modfied_3"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_1_1/Modfied_3"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_1_1/Modfied_5"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_1_1/Modfied_6"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_1_1/Modfied_8"), model.selection("VERTEX", "Revolution_1_1/Generated_Face_2&Cut_1_1/Modified_Face_1"), model.selection("VERTEX", "ExtrusionCut_2_1/Modfied_5&ExtrusionCut_2_1/Modfied_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Lateral_5095"), model.selection("VERTEX", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_2_1/Modfied_7"), model.selection("VERTEX", "ExtrusionCut_3_1/Lateral_5004"), model.selection("VERTEX", "ExtrusionCut_2_1/Modfied_4&ExtrusionCut_2_1/Modfied_9"), model.selection("VERTEX", "ExtrusionCut_2_1/Modfied_3&ExtrusionCut_2_1/Modfied_8"), model.selection("VERTEX", "ExtrusionCut_1_1/Lateral_5108"), model.selection("VERTEX", "ExtrusionCut_1_1/Lateral_5082"), model.selection("VERTEX", "ExtrusionCut_1_1/Lateral_5069"), model.selection("VERTEX", "ExtrusionCut_1_1/Lateral_5043"), model.selection("VERTEX", "ExtrusionCut_2_1/Vertex_5024"), model.selection("VERTEX", "ExtrusionCut_2_1/Vertex_5006"), model.selection("VERTEX", "ExtrusionCut_2_1/Vertex_5015"), model.selection("VERTEX", "Extrusion_1_1/Lateral_4"), model.selection("VERTEX", "Extrusion_1_2/Lateral_4"), model.selection("VERTEX", "ExtrusionCut_2_1/Vertex_5033"), model.selection("VERTEX", "ExtrusionCut_2_1/Vertex_5031"), model.selection("VERTEX", "ExtrusionCut_2_1/Vertex_5022"), model.selection("VERTEX", "ExtrusionCut_2_1/Vertex_5004"), model.selection("VERTEX", "ExtrusionCut_2_1/Vertex_5013"), model.selection("VERTEX", "Common_1_2/Modified_Face_2&Common_1_2/Modified_Face_1"), model.selection("VERTEX", "Common_1_1/Modified_Face_2&Common_1_1/Modified_Face_1")]
213 Group_1 = model.addGroup(Part_1_doc, Group_1_objects)
214 # skip 3 edges, limitation
215 Group_2_objects = [model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_2_1/Modfied_3"), model.selection("EDGE", "ExtrusionCut_2_1/Modfied_3"), model.selection("EDGE", "Cut_1_1/Modified_Face_1&ExtrusionCut_2_1/Generated_Face_1"), model.selection("EDGE", "ExtrusionCut_2_1/Modfied_3&ExtrusionCut_2_1/Modfied_8"), model.selection("EDGE", "ExtrusionCut_2_1/Lateral_5011"), model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_1_1/Modfied_3"), model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&Cut_1_1/Modified_Face_1"), model.selection("EDGE", "Common_1_2/Modified_Face_2&Common_1_2/Modified_Face_1"), model.selection("EDGE", "Cut_1_1/Modified_Face_1&Common_1_2/Modified_Face_2"), model.selection("EDGE", "Common_1_2/Modified_Edge_1"), model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_1_1/Modfied_4"), model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3"), model.selection("EDGE", "ExtrusionCut_2_1/Modfied_4"), model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_2_1/Modfied_4"), model.selection("EDGE", "ExtrusionCut_2_1/Modfied_4&ExtrusionCut_2_1/Modfied_9"), model.selection("EDGE", "ExtrusionCut_2_1/Modfied_9&ExtrusionCut_2_1/Generated_Face_1"), model.selection("EDGE", "Cut_1_1/Modified_Face_1&ExtrusionCut_2_1/Generated_Face_1"), model.selection("EDGE", "ExtrusionCut_2_1/Lateral_5002"), model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_3_1/Modfied_3"), model.selection("EDGE", "Common_1_1/Modified_Edge_1"), model.selection("EDGE", "Common_1_1/Modified_Face_2&Common_1_1/Modified_Face_1"), model.selection("EDGE", "Cut_1_1/Modified_Face_1&ExtrusionCut_2_1/Generated_Face_1"), model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&Revolution_1_1/Generated_Face_2"), model.selection("EDGE", "Cut_1_1/Modified_Face_1&Common_1_1/Modified_Face_2"), model.selection("EDGE", "Revolution_1_1/Generated_Face_4&ExtrusionCut_3_1/Modfied_2"), model.selection("EDGE", "Revolution_1_1/Generated_Face_5&Revolution_1_1/Generated_Face_4"), model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_2_1/Modfied_2"), model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_2_1/Modfied_7"), model.selection("EDGE", "ExtrusionCut_1_1/Modfied_4&Cut_1_1/Modified_Face_1"), model.selection("EDGE", "ExtrusionCut_1_1/Modfied_4"), model.selection("EDGE", "ExtrusionCut_3_1/Modfied_3"), model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Cut_1_1/Modified_Face_1"), model.selection("EDGE", "ExtrusionCut_3_1/Modfied_3&Cut_1_1/Modified_Face_1"), model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_1_1/Modfied_5"), model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_1_1/Modfied_6"), model.selection("EDGE", "ExtrusionCut_1_1/Modfied_6"), model.selection("EDGE", "ExtrusionCut_1_1/Modfied_5"), model.selection("EDGE", "ExtrusionCut_1_1/Modfied_5&Cut_1_1/Modified_Face_1"), model.selection("EDGE", "ExtrusionCut_1_1/Modfied_6&Cut_1_1/Modified_Face_1"), model.selection("EDGE", "Revolution_1_1/Generated_Face_4"), model.selection("EDGE", "Cut_1_1/Modified_Face_1&ExtrusionCut_2_1/Generated_Face_1"), model.selection("EDGE", "ExtrusionCut_2_1/Modfied_5&ExtrusionCut_2_1/Modfied_6"), model.selection("EDGE", "ExtrusionCut_2_1/Modfied_5"), model.selection("EDGE", "Revolution_1_1/Generated_Face_2"), model.selection("EDGE", "ExtrusionCut_2_1/Lateral_5029"), model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&ExtrusionCut_1_1/Modfied_8"), model.selection("EDGE", "ExtrusionCut_1_1/Modfied_8"), model.selection("EDGE", "ExtrusionCut_1_1/Modfied_8&Cut_1_1/Modified_Face_1"), model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2"), model.selection("EDGE", "ExtrusionCut_2_1/Lateral_5020")]
216 Group_2 = model.addGroup(Part_1_doc, Group_2_objects)
217 Group_3_objects = [model.selection("FACE", "ExtrusionCut_2_1/Modfied_3"), model.selection("FACE", "ExtrusionCut_2_1/Generated_Face_1"), model.selection("FACE", "ExtrusionCut_2_1/Modfied_8"), model.selection("FACE", "ExtrusionCut_1_1/Modfied_3"), model.selection("FACE", "Common_1_2/Modified_Face_1"), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), model.selection("FACE", "ExtrusionCut_2_1/Modfied_4"), model.selection("FACE", "ExtrusionCut_2_1/Modfied_9"), model.selection("FACE", "Common_1_1/Modified_Face_1"), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), model.selection("FACE", "ExtrusionCut_2_1/Generated_Face_1"), model.selection("FACE", "Cut_1_1/Modified_Face_1"), model.selection("FACE", "ExtrusionCut_2_1/Modfied_2"), model.selection("FACE", "ExtrusionCut_2_1/Modfied_7"), model.selection("FACE", "Common_1_1/Modified_Face_2"), model.selection("FACE", "ExtrusionCut_3_1/Modfied_2"), model.selection("FACE", "Revolution_1_1/Generated_Face_4"), model.selection("FACE", "ExtrusionCut_2_1/Generated_Face_1"), model.selection("FACE", "Common_1_2/Modified_Face_2"), model.selection("FACE", "Revolution_1_1/Generated_Face_2"), model.selection("FACE", "ExtrusionCut_3_1/Modfied_3"), model.selection("FACE", "ExtrusionCut_1_1/Modfied_5"), model.selection("FACE", "ExtrusionCut_1_1/Modfied_6"), model.selection("FACE", "ExtrusionCut_2_1/Modfied_5"), model.selection("FACE", "ExtrusionCut_2_1/Generated_Face_1"), model.selection("FACE", "ExtrusionCut_2_1/Modfied_6"), model.selection("FACE", "ExtrusionCut_1_1/Modfied_8")]
218 Group_3 = model.addGroup(Part_1_doc, Group_3_objects)
221 assert(model.checkPythonDump())
