src/FeaturesPlugin/Test/Test2255.py

   1 # Copyright (C) 2014-2019  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 # -*- coding: utf-8 -*-
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  29 SketchLine_1 = Sketch_1.addLine(40.12837458064153, 0, 0, 0)
  30 SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchPoint_1.result())
  32 SketchLine_2 = Sketch_1.addLine(0, 0, 0, 44.52500071883479)
  33 SketchLine_3 = Sketch_1.addLine(0, 44.52500071883479, 40.12837458064153, 44.52500071883479)
  34 SketchLine_4 = Sketch_1.addLine(40.12837458064153, 44.52500071883479, 40.12837458064153, 0)
  35 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  36 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  37 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  38 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  39 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  40 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  41 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  42 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  43 SketchCircle_1 = Sketch_1.addCircle(0, 0, 24.97092001270093)
  44 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchCircle_1.center())
  45 model.do()
  46 Wire_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_2"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchLine_4"), model.selection("EDGE", "Sketch_1/SketchLine_1")]
  47 Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
  48 Wire_2 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchCircle_1_2")])
  49 Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Wire_1_1")])
  50 Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Wire_2_1")])
  51 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")], model.selection(), 50, 0)
  52 Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("YOZ"))
  53 SketchLine_5 = Sketch_2.addLine(49.62901186301215, 25.3130971701971, 39.15939470736273, 25.3130971701971)
  54 SketchLine_6 = Sketch_2.addLine(39.15939470736273, 25.3130971701971, 39.15939470736273, 38.96586914453801)
  55 SketchLine_7 = Sketch_2.addLine(39.15939470736273, 38.96586914453801, 49.62901186301215, 38.96586914453801)
  56 SketchLine_8 = Sketch_2.addLine(49.62901186301215, 38.96586914453801, 49.62901186301215, 25.3130971701971)
  57 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  58 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  59 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  60 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  61 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_5.result())
  62 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_6.result())
  63 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_7.result())
  64 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
  65 model.do()
  66 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_8r-SketchLine_7r-SketchLine_6r-SketchLine_5r")], model.selection(), 50, 50, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
  67 model.do()
  68 model.end()
  69
  70 from GeomAPI import  GeomAPI_Shape
  71
  72 model.testNbResults(ExtrusionCut_1, 2)
  73 model.testNbSubResults(ExtrusionCut_1, [0, 0])
  74 model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.SOLID, [1, 1])
  75 model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.FACE, [10, 3])
  76 model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.EDGE, [48, 6])
  77 model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.VERTEX, [96, 12])
  78 model.testResultsVolumes(ExtrusionCut_1, [86396.175406624068273231387138367, 97946.509572227776516228914260864])
  79
  80 assert(model.checkPythonDump())