src/FeaturesPlugin/Test/Test2251.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 # check that extrusion of sketch with intersected edges produces well-named faces
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  29 SketchLine_1 = Sketch_1.addLine(500.0000311770457, 317.8294573643411, -308.1395348837211, 317.8294573643411)
  30 SketchLine_2 = Sketch_1.addLine(-308.1395348837211, 317.8294573643411, -308.1395348837211, -263.9724263224183)
  31 SketchLine_3 = Sketch_1.addLine(-308.1395348837211, -263.9724263224183, 500.0000311770457, -263.9724263224183)
  32 SketchLine_4 = Sketch_1.addLine(500.0000311770457, -263.9724263224183, 500.0000311770457, 317.8294573643411)
  33 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  34 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  35 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  37 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  38 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  39 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  40 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  41 SketchCircle_1 = Sketch_1.addCircle(-118.2170542635659, 222.8682170542636, 141.685090902591)
  42 SketchCircle_2 = Sketch_1.addCircle(294.5736434108529, -40.69767441860468, 113.2187726277406)
  43 SketchArc_1 = Sketch_1.addArc(500.0000311770867, -335287.7996679137, 500.0000311770457, -263.9724263224183, -639.534183538502, -265.9104108427558, True)
  44 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
  45 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchLine_3.result(), SketchArc_1.results()[1])
  46 SketchArc_2 = Sketch_1.addArc(-638.1195022375863, -681.8252609710054, -639.534183538502, -265.9104108427558, -316.014851248167, -418.6983758160058, True)
  47 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
  48 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
  49 SketchArc_3 = Sketch_1.addArc(-167.5780303038277, -297.4405230733651, -316.014851248167, -418.6983758160058, -17.4411870157839, -178.2940378070349, False)
  50 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchArc_3.startPoint())
  51 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchArc_3.results()[1])
  52 SketchArc_4 = Sketch_1.addArc(-301.8048538198685, -403.9610406236078, -17.4411870157839, -178.2940378070349, -637.5573748460384, -265.908384788777, False)
  53 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchArc_4.startPoint())
  54 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchArc_4.results()[1])
  55 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_2.results()[1], SketchArc_4.endPoint())
  56 model.do()
  57 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 100, 0)
  58 Group_1_objects = [
  59 model.selection("FACE", "(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4)(Extrusion_1_1_1/From_Face)(Extrusion_1_1_1/To_Face)(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_4_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_3_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_3)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_2_2)2"),
  60 model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_2"),
  61 model.selection("FACE", "(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_2)(Extrusion_1_1_1/From_Face)(Extrusion_1_1_1/To_Face)(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_4_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_3_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_3)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_2_2)2"),
  62 model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_2"),
  63 model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_2"),
  64 model.selection("FACE", "Extrusion_1_1_6/Generated_Face&Sketch_1/SketchArc_3_2"),
  65 model.selection("FACE", "Extrusion_1_1_5/Generated_Face&Sketch_1/SketchLine_3"),
  66 model.selection("FACE", "Extrusion_1_1_3/From_Face"),
  67 model.selection("FACE", "Extrusion_1_1_5/Generated_Face&Sketch_1/SketchLine_2"),
  68 model.selection("FACE", "Extrusion_1_1_3/To_Face"),
  69 model.selection("FACE", "(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4)(Extrusion_1_1_1/From_Face)(Extrusion_1_1_1/To_Face)(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_4_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_3_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_3)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_2_2)2"),
  70 model.selection("FACE", "Extrusion_1_1_5/Generated_Face&Sketch_1/SketchLine_3"),
  71 model.selection("FACE", "Extrusion_1_1_4/From_Face"),
  72 model.selection("FACE", "Extrusion_1_1_4/To_Face"),
  73 model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchLine_1"),
  74 model.selection("FACE", "Extrusion_1_1_5/Generated_Face&Sketch_1/SketchLine_2"),
  75 model.selection("FACE", "Extrusion_1_1_2/Generated_Face&Sketch_1/SketchCircle_1_2"),
  76 model.selection("FACE", "Extrusion_1_1_6/From_Face"),
  77 model.selection("FACE", "Extrusion_1_1_5/Generated_Face&Sketch_1/SketchArc_3_2"),
  78 model.selection("FACE", "Extrusion_1_1_6/To_Face"),
  79 model.selection("FACE", "Extrusion_1_1_6/Generated_Face&Sketch_1/SketchArc_1_2"),
  80 model.selection("FACE", "Extrusion_1_1_6/Generated_Face&Sketch_1/SketchLine_3"),
  81 model.selection("FACE", "Extrusion_1_1_5/To_Face"),
  82 model.selection("FACE", "(Extrusion_1_1_6/Generated_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1_6/From_Face)(Extrusion_1_1_6/To_Face)(Extrusion_1_1_6/Generated_Face&Sketch_1/SketchArc_3_2)2(Extrusion_1_1_6/Generated_Face&Sketch_1/SketchLine_3)2"),
  83 model.selection("FACE", "Extrusion_1_1_5/From_Face"),
  84 model.selection("FACE", "Extrusion_1_1_6/Generated_Face&Sketch_1/SketchArc_1_2"),
  85 model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchLine_1"),
  86 model.selection("FACE", "Extrusion_1_1_2/Generated_Face&Sketch_1/SketchCircle_1_2"),
  87 model.selection("FACE", "Extrusion_1_1_5/Generated_Face&Sketch_1/SketchArc_3_2"),
  88 model.selection("FACE", "Extrusion_1_1_4/Generated_Face&Sketch_1/SketchArc_4_2"),
  89 model.selection("FACE", "Extrusion_1_1_5/Generated_Face&Sketch_1/SketchArc_4_2"),
  90 model.selection("FACE", "Extrusion_1_1_6/Generated_Face&Sketch_1/SketchLine_3"),
  91 model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_2"),
  92 model.selection("FACE", "Extrusion_1_1_2/From_Face"),
  93 model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4"),
  94 model.selection("FACE", "(Extrusion_1_1_6/Generated_Face&Sketch_1/SketchArc_3_2)(Extrusion_1_1_6/From_Face)(Extrusion_1_1_6/To_Face)(Extrusion_1_1_6/Generated_Face&Sketch_1/SketchArc_1_2)2(Extrusion_1_1_6/Generated_Face&Sketch_1/SketchLine_3)2"),
  95 model.selection("FACE", "Extrusion_1_1_2/To_Face"),
  96 model.selection("FACE", "Extrusion_1_1_7/Generated_Face&Sketch_1/SketchCircle_2_2"),
  97 model.selection("FACE", "(Extrusion_1_1_6/Generated_Face&Sketch_1/SketchArc_3_2)(Extrusion_1_1_6/From_Face)(Extrusion_1_1_6/To_Face)(Extrusion_1_1_6/Generated_Face&Sketch_1/SketchArc_1_2)2(Extrusion_1_1_6/Generated_Face&Sketch_1/SketchLine_3)2"),
  98 model.selection("FACE", "Extrusion_1_1_7/To_Face"),
  99 model.selection("FACE", "Extrusion_1_1_7/From_Face"),
 100 model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_1"),
 101 model.selection("FACE", "Extrusion_1_1_1/From_Face"),
 102 model.selection("FACE", "Extrusion_1_1_1/To_Face")
 103 ]
 104 Group_1 = model.addGroup(Part_1_doc, Group_1_objects)
 105 model.do()
 106 model.end()
 107
 108 # check that resulting group selection is valid
 109 from ModelAPI import *
 110 aFactory = ModelAPI_Session.get().validators()
 111 assert(aFactory.validate(Group_1.feature()))
 112 assert(Group_1.groupList().size() == 44)
 113 for a in range(44):
 114   assert(Group_1.groupList().value(a).value().shapeTypeStr() == "FACE")
 115   assert(len(Group_1.groupList().value(a).namingName()) > 0)
 116
 117 assert(model.checkPythonDump())