src/FeaturesPlugin/Test/Test2248.py

   1 # Copyright (C) 2014-2019  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 # check that extrusion of sketch with intersected edges produces well-named edges
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  29 SketchLine_1 = Sketch_1.addLine(394.1014919414247, 282.461820162796, -355.0948596332293, 282.461820162796)
  30 SketchLine_2 = Sketch_1.addLine(-355.0948596332293, 282.461820162796, -355.0948596332293, -224.6243998437472)
  31 SketchLine_3 = Sketch_1.addLine(-355.0948596332293, -224.6243998437472, 394.1014919414247, -224.6243998437472)
  32 SketchLine_4 = Sketch_1.addLine(394.1014919414247, -224.6243998437472, 394.1014919414247, 282.461820162796)
  33 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  34 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  35 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  37 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  38 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  39 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  40 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  41 SketchArc_1 = Sketch_1.addArc(-7.174842024158346, 282.461820162796, -355.0948596332293, 282.461820162796, 143.9210226543769, -30.9362945892586, False)
  42 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchArc_1.startPoint())
  43 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchLine_2.result(), SketchArc_1.results()[1])
  44 SketchArc_2 = Sketch_1.addArc(394.1014919414247, 441.436567364073, 394.1014919414247, -224.6243998437472, -125.0902346435239, 24.21101315681109, True)
  45 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_2.startPoint())
  46 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchLine_3.result(), SketchArc_2.results()[1])
  47 SketchCircle_1 = Sketch_1.addCircle(-13.45056286489504, 169.4770920976776, 150.6703210346195)
  48 model.do()
  49 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 0)
  50 Group_1_objects = [
  51 model.selection("EDGE", "[Extrusion_1_1_2/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1_2/To_Face]"),
  52 model.selection("EDGE", "[Extrusion_1_1_2/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1_2/From_Face]"),
  53 model.selection("EDGE", "[Extrusion_1_1_2/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1_2/To_Face]"),
  54 model.selection("EDGE", "[Extrusion_1_1_2/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1_2/From_Face]"),
  55 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_2][Extrusion_1_1_1/To_Face]"),
  56 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_2][Extrusion_1_1_1/From_Face]"),
  57 model.selection("EDGE", "[Extrusion_1_1_2/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1_2/To_Face]"),
  58 model.selection("EDGE", "[Extrusion_1_1_2/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1_2/From_Face]"),
  59 model.selection("EDGE", "[(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4)(Extrusion_1_1_1/From_Face)(Extrusion_1_1_1/To_Face)(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2)2][Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_2]"),
  60 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_2][Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_1]"),
  61 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_1][Extrusion_1_1_1/To_Face]"),
  62 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_1][Extrusion_1_1_1/From_Face]"),
  63 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_1][(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1_1/From_Face)(Extrusion_1_1_1/To_Face)(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4)2]"),
  64 model.selection("EDGE", "[Extrusion_1_1_4/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1_4/Generated_Face&Sketch_1/SketchLine_3]"),
  65 model.selection("EDGE", "[Extrusion_1_1_4/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1_4/To_Face]"),
  66 model.selection("EDGE", "[Extrusion_1_1_4/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1_4/From_Face]"),
  67 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_1_1/From_Face]"),
  68 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_1_1/To_Face]"),
  69 model.selection("EDGE", "[(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1_1/From_Face)(Extrusion_1_1_1/To_Face)(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4)2][Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2]"),
  70 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2]"),
  71 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_1_1_1/From_Face]"),
  72 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_1_1_1/To_Face]"),
  73 model.selection("EDGE", "[Extrusion_1_1_4/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1_4/To_Face]"),
  74 model.selection("EDGE", "[Extrusion_1_1_4/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1_4/From_Face]"),
  75 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4]"),
  76 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1_1/To_Face]"),
  77 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1_1/From_Face]"),
  78 model.selection("EDGE", "[(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4)(Extrusion_1_1_1/From_Face)(Extrusion_1_1_1/To_Face)(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2)2][Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4]"),
  79 model.selection("EDGE", "[(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4)(Extrusion_1_1_1/From_Face)(Extrusion_1_1_1/To_Face)(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2)2][Extrusion_1_1_1/To_Face]"),
  80 model.selection("EDGE", "[(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4)(Extrusion_1_1_1/From_Face)(Extrusion_1_1_1/To_Face)(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2)2][Extrusion_1_1_1/From_Face]"),
  81 model.selection("EDGE", "[(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4)(Extrusion_1_1_1/From_Face)(Extrusion_1_1_1/To_Face)(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2)2][Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_2]"),
  82 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4]"),
  83 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_2][Extrusion_1_1_1/From_Face]"),
  84 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_2][Extrusion_1_1_1/To_Face]"),
  85 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_1_1_1/From_Face]"),
  86 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_1_1_1/To_Face]"),
  87 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2]"),
  88 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_1_1/To_Face]"),
  89 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_1_1/From_Face]"),
  90 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_2][Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_1]"),
  91 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_1][Extrusion_1_1_1/From_Face]"),
  92 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_1][Extrusion_1_1_1/To_Face]"),
  93 model.selection("EDGE", "[Extrusion_1_1_1/Generated_Face&Sketch_1/SketchCircle_1_2&weak_name_1][(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1_1/From_Face)(Extrusion_1_1_1/To_Face)(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4)2]"),
  94 model.selection("EDGE", "[(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1_1/From_Face)(Extrusion_1_1_1/To_Face)(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4)2][Extrusion_1_1_1/To_Face]"),
  95 model.selection("EDGE", "[(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1_1/From_Face)(Extrusion_1_1_1/To_Face)(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4)2][Extrusion_1_1_1/From_Face]"),
  96 model.selection("EDGE", "[(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1_1/From_Face)(Extrusion_1_1_1/To_Face)(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_2_2)2(Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_4)2][Extrusion_1_1_1/Generated_Face&Sketch_1/SketchArc_1_2]")
  97 ]
  98 Group_1 = model.addGroup(Part_1_doc, Group_1_objects)
  99 model.do()
 100 model.end()
 101
 102 # check that resulting group selection is valid
 103 from ModelAPI import *
 104 aFactory = ModelAPI_Session.get().validators()
 105 assert(aFactory.validate(Group_1.feature()))
 106 assert(Group_1.groupList().size() == 46)
 107 for a in range(46):
 108   assert(Group_1.groupList().value(a).value().shapeTypeStr() == "EDGE")
 109   assert(len(Group_1.groupList().value(a).namingName()) > 0)
 110
 111 assert(model.checkPythonDump())