src/FeaturesPlugin/Test/Test2231.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 # -*- coding: utf-8 -*-
  22
  23 from salome.shaper import model
  24
  25 model.begin()
  26 partSet = model.moduleDocument()
  27 Part_1 = model.addPart(partSet)
  28 Part_1_doc = Part_1.document()
  29 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  30 SketchLine_1 = Sketch_1.addLine(306.7092651757188, 0, 0, 0)
  31 SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  32 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchPoint_1.result())
  33 SketchLine_2 = Sketch_1.addLine(0, 0, 0, 127.7955271565495)
  34 SketchLine_3 = Sketch_1.addLine(0, 127.7955271565495, 306.7092651757188, 127.7955271565495)
  35 SketchLine_4 = Sketch_1.addLine(306.7092651757188, 127.7955271565495, 306.7092651757188, 0)
  36 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  37 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  38 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  39 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  40 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  41 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  42 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  43 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  44 SketchLine_5 = Sketch_1.addLine(0, 127.7955271565495, -349.8402555910542, 127.7955271565495)
  45 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_5.startPoint())
  46 SketchLine_6 = Sketch_1.addLine(-349.8402555910542, 127.7955271565495, -349.8402555910542, 0)
  47 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  48 SketchLine_7 = Sketch_1.addLine(-349.8402555910542, 0, 0, 0)
  49 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  50 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_7.endPoint())
  51 SketchLine_8 = Sketch_1.addLine(0, 0, 0, -164.5367412140575)
  52 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_8.startPoint())
  53 SketchLine_9 = Sketch_1.addLine(0, -164.5367412140575, -349.8402555910542, -164.5367412140575)
  54 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  55 SketchLine_10 = Sketch_1.addLine(-349.8402555910542, -164.5367412140575, -349.8402555910542, 0)
  56 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  57 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_10.endPoint())
  58 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_7.result())
  59 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_5.result())
  60 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_9.result())
  61 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
  62 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_10.result())
  63 SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_8.result())
  64 SketchLine_11 = Sketch_1.addLine(527.1565495207667, -78.27476038338659, 81.46964856230041, -78.27476038338659)
  65 SketchLine_12 = Sketch_1.addLine(81.46964856230041, -78.27476038338659, 81.46964856230041, -285.9424920127795)
  66 SketchLine_13 = Sketch_1.addLine(81.46964856230041, -285.9424920127795, 527.1565495207667, -285.9424920127795)
  67 SketchLine_14 = Sketch_1.addLine(527.1565495207667, -285.9424920127795, 527.1565495207667, -78.27476038338659)
  68 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
  69 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  70 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  71 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  72 SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_11.result())
  73 SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_12.result())
  74 SketchConstraintHorizontal_7 = Sketch_1.setHorizontal(SketchLine_13.result())
  75 SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_14.result())
  76 model.do()
  77 Extrusion_1_objects = [model.selection("FACE", "Sketch_1/Face-SketchLine_2f-SketchLine_5f-SketchLine_6f-SketchLine_7f"), model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r"), model.selection("FACE", "Sketch_1/Face-SketchLine_10r-SketchLine_9r-SketchLine_8r-SketchLine_7r"), model.selection("FACE", "Sketch_1/Face-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_14f")]
  78 Extrusion_1 = model.addExtrusion(Part_1_doc, Extrusion_1_objects, model.selection(), 10, 0)
  79 Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("COMPSOLID", "Extrusion_1_2")])
  80 model.do()
  81 model.end()
  82
  83 assert(model.checkPythonDump())