src/FeaturesPlugin/Test/Test2231.py

   1 # Copyright (C) 2014-2023  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(306.7092651757188, 0, 0, 0)
  28 SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  29 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchPoint_1.result())
  30 SketchLine_2 = Sketch_1.addLine(0, 0, 0, 127.7955271565495)
  31 SketchLine_3 = Sketch_1.addLine(0, 127.7955271565495, 306.7092651757188, 127.7955271565495)
  32 SketchLine_4 = Sketch_1.addLine(306.7092651757188, 127.7955271565495, 306.7092651757188, 0)
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  34 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  35 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  36 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  37 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  38 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  39 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  40 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  41 SketchLine_5 = Sketch_1.addLine(0, 127.7955271565495, -349.8402555910542, 127.7955271565495)
  42 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_5.startPoint())
  43 SketchLine_6 = Sketch_1.addLine(-349.8402555910542, 127.7955271565495, -349.8402555910542, 0)
  44 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  45 SketchLine_7 = Sketch_1.addLine(-349.8402555910542, 0, 0, 0)
  46 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  47 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_7.endPoint())
  48 SketchLine_8 = Sketch_1.addLine(0, 0, 0, -164.5367412140575)
  49 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_8.startPoint())
  50 SketchLine_9 = Sketch_1.addLine(0, -164.5367412140575, -349.8402555910542, -164.5367412140575)
  51 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  52 SketchLine_10 = Sketch_1.addLine(-349.8402555910542, -164.5367412140575, -349.8402555910542, 0)
  53 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  54 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_10.endPoint())
  55 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_7.result())
  56 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_5.result())
  57 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_9.result())
  58 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
  59 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_10.result())
  60 SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_8.result())
  61 SketchLine_11 = Sketch_1.addLine(527.1565495207667, -78.27476038338659, 81.46964856230041, -78.27476038338659)
  62 SketchLine_12 = Sketch_1.addLine(81.46964856230041, -78.27476038338659, 81.46964856230041, -285.9424920127795)
  63 SketchLine_13 = Sketch_1.addLine(81.46964856230041, -285.9424920127795, 527.1565495207667, -285.9424920127795)
  64 SketchLine_14 = Sketch_1.addLine(527.1565495207667, -285.9424920127795, 527.1565495207667, -78.27476038338659)
  65 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
  66 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  67 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  68 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  69 SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_11.result())
  70 SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_12.result())
  71 SketchConstraintHorizontal_7 = Sketch_1.setHorizontal(SketchLine_13.result())
  72 SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_14.result())
  73 model.do()
  74 Extrusion_1_objects = [model.selection("FACE", "Sketch_1/Face-SketchLine_2f-SketchLine_5f-SketchLine_6f-SketchLine_7f"), model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r"), model.selection("FACE", "Sketch_1/Face-SketchLine_10r-SketchLine_9r-SketchLine_8r-SketchLine_7r"), model.selection("FACE", "Sketch_1/Face-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_14f")]
  75 Extrusion_1 = model.addExtrusion(Part_1_doc, Extrusion_1_objects, model.selection(), 10, 0)
  76 Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("COMPSOLID", "Extrusion_1_2")])
  77 model.do()
  78 model.end()
  79
  80 assert(model.checkPythonDump())