1 # Copyright (C) 2014-2019 CEA/DEN, EDF R&D
3 # This library is free software; you can redistribute it and/or
4 # modify it under the terms of the GNU Lesser General Public
5 # License as published by the Free Software Foundation; either
6 # version 2.1 of the License, or (at your option) any later version.
8 # This library is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 # Lesser General Public License for more details.
13 # You should have received a copy of the GNU Lesser General Public
14 # License along with this library; if not, write to the Free Software
15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 from salome.shaper import model
23 partSet = model.moduleDocument()
24 Part_1 = model.addPart(partSet)
25 Part_1_doc = Part_1.document()
26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
27 SketchLine_1 = Sketch_1.addLine(0, 0, 0, 50)
28 SketchLine_2 = Sketch_1.addLine(0, 50, 50, 50)
29 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
30 SketchLine_3 = Sketch_1.addLine(50, 50, 50, 0)
31 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
32 SketchLine_4 = Sketch_1.addLine(50, 0, 0, 0)
33 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
34 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
35 SketchConstraintRigid_1 = Sketch_1.setFixed(SketchLine_1.startPoint())
36 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
37 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_4.result(), 50)
38 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_1.result(), 50)
39 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_1.result(), SketchLine_3.result())
40 SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_2.result(), SketchLine_4.result())
41 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_4.result())
43 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 50, 0)
44 Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/From_Face"), 25, True)
45 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
46 SketchLine_5 = Sketch_2.addLine(84.67753244325934, -72.65003691291119, -28.95543815719345, -72.65003691291119)
47 SketchLine_6 = Sketch_2.addLine(-28.95543815719345, -72.65003691291119, -28.95543815719345, 10.01640181835304)
48 SketchLine_7 = Sketch_2.addLine(-28.95543815719345, 10.01640181835304, 84.67753244325934, 10.01640181835304)
49 SketchLine_8 = Sketch_2.addLine(84.67753244325934, 10.01640181835304, 84.67753244325934, -72.65003691291119)
50 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
51 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
52 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
53 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
54 SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_5.result())
55 SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_6.result())
56 SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_7.result())
57 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_8.result())
59 Wire_1_objects = [model.selection("EDGE", "Sketch_2/SketchLine_6"), model.selection("EDGE", "Sketch_2/SketchLine_8"), model.selection("EDGE", "Sketch_2/SketchLine_5"), model.selection("EDGE", "Sketch_2/SketchLine_7")]
60 Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
61 Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Wire_1_1")])
62 Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("FACE", "Face_1_1")])
63 Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
64 SketchLine_9 = Sketch_3.addLine(0, 0, 0, 10)
65 SketchLine_10 = Sketch_3.addLine(0, 10, 10, 10)
66 SketchConstraintCoincidence_9 = Sketch_3.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
67 SketchLine_11 = Sketch_3.addLine(10, 10, 10, 0)
68 SketchConstraintCoincidence_10 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
69 SketchLine_12 = Sketch_3.addLine(10, 0, 0, 0)
70 SketchConstraintCoincidence_11 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
71 SketchConstraintCoincidence_12 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
72 SketchConstraintRigid_2 = Sketch_3.setFixed(SketchLine_9.startPoint())
73 SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_9.result())
74 SketchConstraintLength_3 = Sketch_3.setLength(SketchLine_12.result(), 10)
75 SketchConstraintLength_4 = Sketch_3.setLength(SketchLine_9.result(), 10)
76 SketchConstraintParallel_3 = Sketch_3.setParallel(SketchLine_9.result(), SketchLine_11.result())
77 SketchConstraintParallel_4 = Sketch_3.setParallel(SketchLine_10.result(), SketchLine_12.result())
78 SketchConstraintPerpendicular_2 = Sketch_3.setPerpendicular(SketchLine_9.result(), SketchLine_12.result())
80 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_12r-SketchLine_11r-SketchLine_10r-SketchLine_9r")], model.selection(), 50, 0)
81 Cut_1 = model.addCut(Part_1_doc, [model.selection("COMPSOLID", "Partition_1_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
