src/FeaturesPlugin/Test/Test2172.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  28 SketchLine_1 = Sketch_1.addLine(-85.62958302127123, 51.64856737222455, 159.4430553521271, 401.6485673722245)
  29 SketchLine_2 = Sketch_1.addLine(159.4430553521271, 401.6485673722245, 909.4430553521272, 401.6485673722245)
  30 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  31 SketchLine_3 = Sketch_1.addLine(909.4430553521272, 401.6485673722245, 909.4430553521272, -98.35143262777548)
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  33 SketchLine_4 = Sketch_1.addLine(909.4430553521272, -98.35143262777548, 551.916977573864, -398.3514326277755)
  34 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  35 SketchLine_5 = Sketch_1.addLine(551.916977573864, -398.3514326277755, -18.08302242613596, -398.3514326277755)
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  37 SketchLine_6 = Sketch_1.addLine(-18.08302242613596, -398.3514326277755, -18.08302242613596, -98.35143262777552)
  38 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  39 SketchArc_1 = Sketch_1.addArc(0, -7.626897158721915e-023, -85.62958302127123, 51.64856737222455, -18.08302242613596, -98.35143262777552, False)
  40 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchArc_1.endPoint())
  41 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.startPoint())
  42 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_2.result())
  43 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_5.result())
  44 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
  45 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_6.result())
  46 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 100)
  47 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), 750)
  48 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_3.result(), 500)
  49 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_5.result(), 570)
  50 SketchConstraintAngle_1 = Sketch_1.setAngleBackward(SketchLine_5.result(), SketchLine_4.result(), 139.9999999999999)
  51 SketchConstraintAngle_2 = Sketch_1.setAngle(SketchLine_1.result(), SketchLine_2.result(), 124.9999999999987)
  52 SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_6.result(), 300)
  53 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_1.startPoint(), SketchLine_2.result(), 350)
  54 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_5.result(), 300)
  55 SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  56 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_1.center(), SketchPoint_1.coordinates())
  57 SketchCircle_1 = Sketch_1.addCircle(623.3624504738834, 247.4315530304268, 75)
  58 SketchCircle_2 = Sketch_1.addCircle(267.9975824521076, 55.86558171402226, 100)
  59 SketchLine_7 = Sketch_1.addLine(-18.08302242613596, -98.35143262777552, 356.0223839531057, 103.3169707422677)
  60 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  61 SketchLine_8 = Sketch_1.addLine(557.3438493481349, 211.8430112592427, 909.4430553521272, 401.6485673722245)
  62 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_8.endPoint())
  63 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchLine_7.result())
  64 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchCircle_1.center(), SketchLine_7.result())
  65 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchCircle_2.results()[1], 100)
  66 SketchConstraintRadius_3 = Sketch_1.setRadius(SketchCircle_1.results()[1], 75)
  67 SketchPoint_2 = Sketch_1.addPoint(557.3438493481349, 211.8430112592427)
  68 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_8.startPoint())
  69 SketchConstraintCollinear_1 = Sketch_1.setCollinear(SketchLine_7.result(), SketchLine_8.result())
  70 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchCircle_2.results()[1])
  71 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchCircle_2.center(), SketchLine_6.endPoint(), 325)
  72 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchCircle_1.results()[1])
  73 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchCircle_1.center(), SketchLine_2.endPoint(), 325)
  74 model.do()
  75 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f-SketchLine_8f")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
  76 Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_2_2f-SketchLine_7r")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
  77 Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Revolution_1_1/Lateral_Edge_1"), model.selection("EDGE", "Revolution_1_1/Lateral_Edge_2"), model.selection("EDGE", "Revolution_1_1/Base_Edge_1"), model.selection("EDGE", "Revolution_1_1/Base_Edge_2"), model.selection("EDGE", "Revolution_2_1/Lateral_Edge_1"), model.selection("EDGE", "Revolution_2_1/Lateral_Edge_2"), model.selection("EDGE", "Revolution_2_1/Lateral_Edge_3"), model.selection("EDGE", "Revolution_2_1/Base_Edge_2"), model.selection("EDGE", "Revolution_2_1/Base_Edge_3"), model.selection("EDGE", "Revolution_2_1/Base_Edge_1")])
  78 model.end()
  79
  80 # check that resulting group selection is valid
  81 from ModelAPI import *
  82 aFactory = ModelAPI_Session.get().validators()
  83 assert(aFactory.validate(Group_1.feature()))
  84 assert(Group_1.groupList().size() == 10)
  85 for a in range(3):
  86   assert(Group_1.groupList().value(a).value().shapeTypeStr() == "EDGE")
  87   assert(len(Group_1.groupList().value(a).namingName()) > 0)
  88
  89 assert(model.checkPythonDump())