src/FeaturesPlugin/Test/Test2023.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(178.3876500857632, 167.2384219554031, -133.7907375643225, 167.2384219554031)
  29 SketchLine_2 = Sketch_1.addLine(-133.7907375643225, 167.2384219554031, -133.7907375643225, -134.6483704974271)
  30 SketchLine_3 = Sketch_1.addLine(-133.7907375643225, -134.6483704974271, 178.3876500857632, -134.6483704974271)
  31 SketchLine_4 = Sketch_1.addLine(178.3876500857632, -134.6483704974271, 178.3876500857632, 167.2384219554031)
  32 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  34 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  35 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  36 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  37 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  38 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  39 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  40 model.do()
  41 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f")], model.selection(), 100, 0)
  42 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1"))
  43 SketchLine_5 = Sketch_2.addLine(99.48542024013722, 69.46826758147516, -34.30531732418524, 69.46826758147516)
  44 SketchLine_6 = Sketch_2.addLine(-34.30531732418524, 69.46826758147516, -34.30531732418524, -62.60720411663805)
  45 SketchLine_7 = Sketch_2.addLine(-34.30531732418524, -62.60720411663805, 99.48542024013722, -62.60720411663805)
  46 SketchLine_8 = Sketch_2.addLine(99.48542024013722, -62.60720411663805, 99.48542024013722, 69.46826758147516)
  47 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  48 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  49 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  50 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  51 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_5.result())
  52 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_6.result())
  53 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_7.result())
  54 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
  55 model.do()
  56 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f")], model.selection(), 10, 110)
  57 Intersection_1 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1")])
  58 Rotation_1 = model.addRotation(Part_1_doc, [model.selection("COMPOUND", "Intersection_1_1")], model.selection("EDGE", "PartSet/OZ"), 45)
  59 model.end()
  60
  61 assert(model.checkPythonDump())