1 # Copyright (C) 2020 CEA/DEN, EDF R&D
3 # This library is free software; you can redistribute it and/or
4 # modify it under the terms of the GNU Lesser General Public
5 # License as published by the Free Software Foundation; either
6 # version 2.1 of the License, or (at your option) any later version.
8 # This library is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 # Lesser General Public License for more details.
13 # You should have received a copy of the GNU Lesser General Public
14 # License along with this library; if not, write to the Free Software
15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 from SketchAPI import *
22 from salome.shaper import model
25 partSet = model.moduleDocument()
26 Part_1 = model.addPart(partSet)
27 Part_1_doc = Part_1.document()
28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
29 SketchLine_1 = Sketch_1.addLine(0, 0, 0, -99)
30 SketchLine_1.setAuxiliary(True)
31 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
32 SketchPoint_1 = SketchProjection_1.createdFeature()
33 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchPoint_1.result())
34 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
35 SketchLine_2 = Sketch_1.addLine(0, 0, -44, 0)
36 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.startPoint())
37 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_2.result())
38 SketchLine_3 = Sketch_1.addLine(-44, 0, -44, -57.48528137423859)
39 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
40 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_3.result())
41 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), 44)
42 SketchArc_1 = Sketch_1.addArc(-31, -57.48528137423859, -44, -57.48528137423859, -40.19238815542511, -66.6776695296637, False)
43 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
44 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchLine_3.result(), SketchArc_1.results()[1])
45 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 13)
46 SketchLine_4 = Sketch_1.addLine(-40.19238815542511, -66.6776695296637, -13.4350288425444, -93.43502884254441)
47 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_4.startPoint())
48 SketchArc_2 = Sketch_1.addArc(0, -80, -13.4350288425444, -93.43502884254441, 0, -99, False)
49 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_2.center())
50 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchArc_2.startPoint())
51 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_2.endPoint())
52 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_4.result())
53 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchLine_4.result(), SketchArc_2.results()[1])
54 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchArc_2.endPoint())
55 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 19)
56 SketchLine_5 = Sketch_1.addLine(0, -80, -13.4350288425444, -93.43502884254441)
57 SketchLine_5.setName("SketchLine_6")
58 SketchLine_5.result().setName("SketchLine_6")
59 SketchLine_5.setAuxiliary(True)
60 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_5.startPoint())
61 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_12")
62 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.endPoint())
63 SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_13")
64 SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_5.result(), SketchLine_1.result(), 45, type = "Supplementary")
65 SketchConstraintMirror_1_objects = [SketchLine_2.result(), SketchLine_3.result(), SketchArc_1.results()[1], SketchLine_4.result(), SketchArc_2.results()[1]]
66 SketchConstraintMirror_1 = Sketch_1.addMirror(SketchLine_1.result(), SketchConstraintMirror_1_objects)
67 [SketchLine_6, SketchLine_7, SketchArc_3, SketchLine_8, SketchArc_4] = SketchConstraintMirror_1.mirrored()
68 SketchLine_8.setName("SketchLine_9")
69 SketchLine_8.result().setName("SketchLine_9")
70 SketchLine_7.setName("SketchLine_8")
71 SketchLine_7.result().setName("SketchLine_8")
72 SketchLine_6.setName("SketchLine_7")
73 SketchLine_6.result().setName("SketchLine_7")
74 SketchCircle_1 = Sketch_1.addCircle(-25, -44, 5)
75 SketchCircle_1.setName("SketchCircle_2")
76 SketchCircle_1.result().setName("SketchCircle_2")
77 SketchCircle_1.results()[1].setName("SketchCircle_2_2")
78 SketchCircle_2 = Sketch_1.addCircle(25, -44, 5)
79 SketchCircle_2.setName("SketchCircle_3")
80 SketchCircle_2.result().setName("SketchCircle_3")
81 SketchCircle_2.results()[1].setName("SketchCircle_3_2")
82 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchCircle_1.results()[1], SketchCircle_2.results()[1])
83 SketchConstraintRadius_3 = Sketch_1.setRadius(SketchCircle_1.results()[1], 5)
84 SketchConstraintRadius_3.setName("SketchConstraintRadius_7")
85 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchCircle_1.center(), SketchCircle_2.center(), 50, True)
86 SketchConstraintDistance_1.setName("SketchConstraintDistance_4")
87 SketchLine_9 = Sketch_1.addLine(-25, -44, 25, -44)
88 SketchLine_9.setName("SketchLine_21")
89 SketchLine_9.result().setName("SketchLine_21")
90 SketchLine_9.setAuxiliary(True)
91 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchCircle_1.center(), SketchLine_9.startPoint())
92 SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_28")
93 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchLine_9.endPoint())
94 SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_29")
95 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_9.result())
96 SketchConstraintHorizontal_2.setName("SketchConstraintHorizontal_4")
97 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchAPI_Arc(SketchArc_4).center(), SketchLine_9.result(), 36, True)
98 SketchConstraintDistance_2.setName("SketchConstraintDistance_5")
99 SketchPoint_2 = Sketch_1.addPoint(2.896598636358403e-31, -44)
100 SketchPoint_2.setName("SketchPoint_4")
101 SketchPoint_2.result().setName("SketchPoint_4")
102 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_9.result())
103 SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_30")
104 SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchLine_9.result(), SketchPoint_2.coordinates())
105 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_1.result())
106 SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_31")
107 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_6.result(), SketchLine_5.startPoint(), 80, True)
108 SketchConstraintDistance_3.setName("SketchConstraintDistance_8")
110 Sketch_1.changeFacesOrder([[SketchLine_2.result(), SketchLine_3.result(), SketchArc_1.results()[1], SketchLine_4.result(), SketchArc_2.results()[1], SketchArc_4.results()[1], SketchLine_8.result(), SketchArc_3.results()[1], SketchLine_7.result(), SketchLine_6.result(), SketchCircle_1.results()[1], SketchCircle_2.results()[1]],
111 [SketchCircle_2.results()[1]],
112 [SketchCircle_1.results()[1]]
115 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_2f-SketchLine_3f-SketchArc_1_2f-SketchLine_4f-SketchArc_2_2f-SketchArc_4_2f-SketchLine_9r-SketchArc_3_2f-SketchLine_8r-SketchLine_7r-SketchCircle_2_2r-SketchCircle_3_2r")], model.selection(), 10, 0)
116 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
117 SketchLine_10 = Sketch_2.addLine(0, 0, 0, -16)
118 SketchLine_10.setName("SketchLine_10")
119 SketchLine_10.result().setName("SketchLine_10")
120 SketchLine_10.setAuxiliary(True)
121 SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_1/To_Face]"), False)
122 SketchPoint_3 = SketchProjection_2.createdFeature()
123 SketchPoint_3.setName("SketchPoint_2")
124 SketchPoint_3.result().setName("SketchPoint_2")
125 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchPoint_3.result())
126 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_14")
127 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_10.result())
128 SketchLine_11 = Sketch_2.addLine(-44, 0, -44, -13)
129 SketchLine_11.setName("SketchLine_11")
130 SketchLine_11.result().setName("SketchLine_11")
131 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]"), False)
132 SketchPoint_4 = SketchProjection_3.createdFeature()
133 SketchPoint_4.setName("SketchPoint_3")
134 SketchPoint_4.result().setName("SketchPoint_3")
135 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchPoint_4.result())
136 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_15")
137 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_11.result())
138 SketchLine_12 = Sketch_2.addLine(-44, -13, -21.99999999999997, -13)
139 SketchLine_12.setName("SketchLine_12")
140 SketchLine_12.result().setName("SketchLine_12")
141 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
142 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_16")
143 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_12.result())
144 SketchConstraintHorizontal_3.setName("SketchConstraintHorizontal_2")
145 SketchArc_5 = Sketch_2.addArc(-22, -16.00000000000039, -21.99999999999997, -13, -19, -16, True)
146 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchArc_5.startPoint())
147 SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_17")
148 SketchConstraintTangent_4 = Sketch_2.setTangent(SketchLine_12.result(), SketchArc_5.results()[1])
149 SketchLine_13 = Sketch_2.addLine(-19, -16, 0, -16)
150 SketchLine_13.setName("SketchLine_13")
151 SketchLine_13.result().setName("SketchLine_13")
152 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchArc_5.endPoint(), SketchLine_13.startPoint())
153 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_18")
154 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_10.result())
155 SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_19")
156 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_13.result())
157 SketchConstraintHorizontal_4.setName("SketchConstraintHorizontal_3")
158 SketchConstraintRadius_4 = Sketch_2.setRadius(SketchArc_5.results()[1], 3)
159 SketchConstraintRadius_4.setName("SketchConstraintRadius_3")
160 SketchConstraintLength_2 = Sketch_2.setLength(SketchLine_13.result(), "38/2")
161 SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_13.result(), SketchLine_12.endPoint(), 3, True)
162 SketchConstraintDistance_4.setName("SketchConstraintDistance_2")
163 SketchConstraintLength_3 = Sketch_2.setLength(SketchLine_11.result(), 13)
164 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_10.endPoint())
165 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_20")
166 SketchLine_14 = Sketch_2.addLine(-44, 0, -25, 0)
167 SketchLine_14.setName("SketchLine_14")
168 SketchLine_14.result().setName("SketchLine_14")
169 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_14.startPoint())
170 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_21")
171 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/To_Face]"), False)
172 SketchLine_15 = SketchProjection_4.createdFeature()
173 SketchLine_15.setName("SketchLine_15")
174 SketchLine_15.result().setName("SketchLine_15")
175 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.result())
176 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_22")
177 SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
178 SketchLine_16 = SketchProjection_5.createdFeature()
179 SketchLine_16.setName("SketchLine_16")
180 SketchLine_16.result().setName("SketchLine_16")
181 SketchArc_6 = Sketch_2.addArc(-25, 6, -25, 0, -19, 6, False)
182 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchArc_6.startPoint())
183 SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_23")
184 SketchConstraintTangent_5 = Sketch_2.setTangent(SketchLine_14.result(), SketchArc_6.results()[1])
185 SketchArc_7 = Sketch_2.addArc(0, 5.999999999999997, -19, 6, 0, 25, True)
186 SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchArc_6.endPoint(), SketchArc_7.startPoint())
187 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_24")
188 SketchConstraintTangent_6 = Sketch_2.setTangent(SketchArc_6.results()[1], SketchArc_7.results()[1])
189 SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchArc_7.endPoint(), SketchLine_16.result())
190 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_25")
191 SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchArc_7.center(), SketchLine_16.result())
192 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_26")
193 SketchConstraintRadius_5 = Sketch_2.setRadius(SketchArc_7.results()[1], 19)
194 SketchConstraintRadius_5.setName("SketchConstraintRadius_4")
195 SketchConstraintRadius_6 = Sketch_2.setRadius(SketchArc_6.results()[1], 6)
196 SketchConstraintRadius_6.setName("SketchConstraintRadius_5")
197 SketchConstraintDistance_5 = Sketch_2.setDistance(SketchArc_7.center(), SketchLine_12.result(), 19, True)
198 SketchConstraintDistance_5.setName("SketchConstraintDistance_3")
199 SketchConstraintMirror_2_objects = [SketchArc_5.results()[1], SketchLine_12.result(), SketchLine_11.result(), SketchArc_6.results()[1], SketchArc_7.results()[1], SketchLine_13.result(), SketchLine_14.result()]
200 SketchConstraintMirror_2 = Sketch_2.addMirror(SketchLine_10.result(), SketchConstraintMirror_2_objects)
201 [SketchArc_8, SketchLine_17, SketchLine_18, SketchArc_9, SketchArc_10, SketchLine_19, SketchLine_20] = SketchConstraintMirror_2.mirrored()
202 SketchLine_20.setName("SketchLine_20")
203 SketchLine_20.result().setName("SketchLine_20")
204 SketchLine_19.setName("SketchLine_19")
205 SketchLine_19.result().setName("SketchLine_19")
206 SketchLine_18.setName("SketchLine_18")
207 SketchLine_18.result().setName("SketchLine_18")
208 SketchLine_17.setName("SketchLine_17")
209 SketchLine_17.result().setName("SketchLine_17")
210 SketchCircle_3 = Sketch_2.addCircle(0, 5.999999999999997, 9.5)
211 SketchCircle_3.setName("SketchCircle_1")
212 SketchCircle_3.result().setName("SketchCircle_1")
213 SketchCircle_3.results()[1].setName("SketchCircle_1_2")
214 SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchArc_7.center(), SketchCircle_3.center())
215 SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_27")
216 SketchConstraintRadius_7 = Sketch_2.setRadius(SketchCircle_3.results()[1], "19/2")
217 SketchConstraintRadius_7.setName("SketchConstraintRadius_6")
219 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_11f-SketchLine_12f-SketchArc_5_2r-SketchLine_13f-SketchLine_19r-SketchArc_8_2r-SketchLine_17r-SketchLine_18r-SketchLine_20f-SketchArc_9_2r-SketchArc_10_2f-SketchArc_7_2f-SketchArc_6_2r-SketchLine_14r-SketchCircle_1_2r")], model.selection(), 40, 10)
220 Sketch_3 = model.addSketch(Part_1_doc, model.standardPlane("YOZ"))
221 SketchLine_21 = Sketch_3.addLine(-16, 50, -20, 50)
222 SketchLine_21.setName("SketchLine_22")
223 SketchLine_21.result().setName("SketchLine_22")
224 SketchProjection_6 = Sketch_3.addProjection(model.selection("VERTEX", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_13][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_19][Extrusion_2_1/To_Face]"), False)
225 SketchPoint_5 = SketchProjection_6.createdFeature()
226 SketchConstraintCoincidence_30 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchPoint_5.result())
227 SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_32")
228 SketchConstraintHorizontal_5 = Sketch_3.setHorizontal(SketchLine_21.result())
229 SketchLine_22 = Sketch_3.addLine(-20, 50, -80, 10)
230 SketchLine_22.setName("SketchLine_23")
231 SketchLine_22.result().setName("SketchLine_23")
232 SketchConstraintCoincidence_31 = Sketch_3.setCoincident(SketchLine_21.endPoint(), SketchLine_22.startPoint())
233 SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_33")
234 SketchProjection_7 = Sketch_3.addProjection(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchArc_5_2][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_13]"), True)
235 SketchLine_23 = SketchProjection_7.createdFeature()
236 SketchLine_23.setName("SketchLine_24")
237 SketchLine_23.result().setName("SketchLine_24")
238 SketchLine_24 = Sketch_3.addLine(-16, 9.999999999999996, -80, 10)
239 SketchLine_24.setName("SketchLine_25")
240 SketchLine_24.result().setName("SketchLine_25")
241 SketchConstraintCoincidence_32 = Sketch_3.setCoincident(SketchLine_24.startPoint(), SketchLine_23.result())
242 SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_34")
243 SketchConstraintHorizontal_6 = Sketch_3.setHorizontal(SketchLine_24.result())
244 SketchConstraintCoincidence_33 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_24.endPoint())
245 SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_35")
246 SketchProjection_8 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
247 SketchLine_25 = SketchProjection_8.createdFeature()
248 SketchLine_25.setName("SketchLine_26")
249 SketchLine_25.result().setName("SketchLine_26")
250 SketchConstraintDistance_6 = Sketch_3.setDistance(SketchLine_22.startPoint(), SketchLine_25.result(), 20, True)
251 SketchConstraintDistance_6.setName("SketchConstraintDistance_6")
252 SketchConstraintDistance_7 = Sketch_3.setDistance(SketchAPI_Point(SketchPoint_5).coordinates(), SketchLine_24.startPoint(), 40, True)
253 SketchConstraintDistance_7.setName("SketchConstraintDistance_7")
254 SketchConstraintLength_4 = Sketch_3.setLength(SketchLine_24.result(), "67-3")
256 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_22r-SketchLine_23f-SketchLine_25r-SketchProjection_7f")], model.selection(), 5, 5)
257 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_1_2f")], model.selection(), [model.selection("SOLID", "Extrusion_1_1")])
258 Fuse_1_objects_1 = [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_1_1"), model.selection("SOLID", "Extrusion_3_1")]
259 Fuse_1 = model.addFuse(Part_1_doc, Fuse_1_objects_1, removeEdges = True, keepSubResults = True)
260 model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
263 from GeomAPI import GeomAPI_Shape
264 model.testNbResults(Fuse_1, 1)
265 model.testNbSubResults(Fuse_1, [0])
266 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [1])
267 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [27])
268 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [150])
269 model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [300])
270 model.testResultsVolumes(Fuse_1, [162690.939657109178369864821434021])
272 from ModelAPI import *
273 aFactory = ModelAPI_Session.get().validators()
275 # Check that the features are not in error
276 for i in range(Part_1_doc.size("Features")):
277 feature = objectToFeature(Part_1_doc.object("Features", i))
278 name = feature.name()
279 error = feature.error()
280 assert(error == ''), "The feature {0} is in error: {1}".format(name, error)
281 assert(aFactory.validate(feature)), "The feature {0} is in error: {1}".format(name, error)
283 assert(Part_1_doc.size("Groups") == 3)
285 assert(model.checkPythonDump())
