src/FeaturesPlugin/Test/Test1922.py

   1 # Copyright (C) 2014-2023  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(-717.0963364993213, -45.06817090071282, -254.8675173043772, -45.06817090071281)
  28 SketchLine_1.setAuxiliary(True)
  29 SketchLine_2 = Sketch_1.addLine(-254.8675173043772, -45.06817090071281, -254.8675173043772, 193.0685819822336)
  30 SketchLine_2.setAuxiliary(True)
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  32 SketchLine_3 = Sketch_1.addLine(-254.8675173043772, 193.0685819822336, -102.0809741405142, 193.0685819822336)
  33 SketchLine_3.setAuxiliary(True)
  34 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  35 SketchLine_4 = Sketch_1.addLine(-102.0809741405142, 193.0685819822336, -102.0809741405142, -180.9380775505473)
  36 SketchLine_4.setAuxiliary(True)
  37 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  38 SketchLine_5 = Sketch_1.addLine(-102.0809741405142, -180.9380775505473, -717.0963364993213, -180.9380775505473)
  39 SketchLine_5.setAuxiliary(True)
  40 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  41 SketchLine_6 = Sketch_1.addLine(-717.0963364993213, -180.9380775505473, -717.0963364993213, -45.06817090071282)
  42 SketchLine_6.setAuxiliary(True)
  43 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  44 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_6.endPoint())
  45 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_3.result())
  46 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_1.result())
  47 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
  48 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_4.result())
  49 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_2.result())
  50 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
  51 SketchPoint_1 = Sketch_1.addPoint(-684.5318860244231, -45.06817090071282)
  52 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_1.result())
  53 SketchPoint_2 = Sketch_1.addPoint(-599.0502035278153, -45.06817090071282)
  54 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_1.result())
  55 SketchPoint_3 = Sketch_1.addPoint(-509.4979647218452, -45.06817090071282)
  56 SketchPoint_3.setName("SketchPoint_4")
  57 SketchPoint_3.result().setName("SketchPoint_4")
  58 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchPoint_3.coordinates(), SketchLine_1.result())
  59 SketchPoint_4 = Sketch_1.addPoint(-429.4436906377204, -45.06817090071282)
  60 SketchPoint_4.setName("SketchPoint_5")
  61 SketchPoint_4.result().setName("SketchPoint_5")
  62 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchPoint_4.coordinates(), SketchLine_1.result())
  63 SketchPoint_5 = Sketch_1.addPoint(-356.1736770691994, -45.06817090071282)
  64 SketchPoint_5.setName("SketchPoint_6")
  65 SketchPoint_5.result().setName("SketchPoint_6")
  66 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchPoint_5.coordinates(), SketchLine_1.result())
  67 SketchPoint_6 = Sketch_1.addPoint(-254.8675173043772, 25.10176390773411)
  68 SketchPoint_6.setName("SketchPoint_7")
  69 SketchPoint_6.result().setName("SketchPoint_7")
  70 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchPoint_6.coordinates(), SketchLine_2.result())
  71 SketchPoint_7 = Sketch_1.addPoint(-254.8675173043772, 103.7991858887381)
  72 SketchPoint_7.setName("SketchPoint_8")
  73 SketchPoint_7.result().setName("SketchPoint_8")
  74 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchPoint_7.coordinates(), SketchLine_2.result())
  75 SketchPoint_8 = Sketch_1.addPoint(-196.0651289009498, 193.0685819822336)
  76 SketchPoint_8.setName("SketchPoint_9")
  77 SketchPoint_8.result().setName("SketchPoint_9")
  78 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchPoint_8.coordinates(), SketchLine_3.result())
  79 SketchPoint_9 = Sketch_1.addPoint(-102.0809741405142, 116.0108548168249)
  80 SketchPoint_9.setName("SketchPoint_10")
  81 SketchPoint_9.result().setName("SketchPoint_10")
  82 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchPoint_9.coordinates(), SketchLine_4.result())
  83 SketchPoint_10 = Sketch_1.addPoint(-102.0809741405142, -118.7245590230665)
  84 SketchPoint_10.setName("SketchPoint_11")
  85 SketchPoint_10.result().setName("SketchPoint_11")
  86 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchPoint_10.coordinates(), SketchLine_4.result())
  87 SketchPoint_11 = Sketch_1.addPoint(-342.6051560379917, -180.9380775505472)
  88 SketchPoint_11.setName("SketchPoint_13")
  89 SketchPoint_11.result().setName("SketchPoint_13")
  90 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchPoint_11.coordinates(), SketchLine_5.result())
  91 SketchPoint_12 = Sketch_1.addPoint(-584.1248303934869, -180.9380775505472)
  92 SketchPoint_12.setName("SketchPoint_14")
  93 SketchPoint_12.result().setName("SketchPoint_14")
  94 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchPoint_12.coordinates(), SketchLine_5.result())
  95 model.do()
  96 Vertex_1_objects = [model.selection("VERTEX", "Sketch_1/SketchLine_5_EndVertex"), model.selection("VERTEX", "Sketch_1/SketchPoint_7"), model.selection("VERTEX", "Sketch_1/SketchLine_4_EndVertex"), model.selection("VERTEX", "Sketch_1/SketchPoint_11"), model.selection("VERTEX", "Sketch_1/SketchLine_2_EndVertex"), model.selection("VERTEX", "Sketch_1/SketchPoint_10"), model.selection("VERTEX", "Sketch_1/SketchPoint_8"), model.selection("VERTEX", "Sketch_1/SketchPoint_9"), model.selection("VERTEX", "Sketch_1/SketchLine_1_EndVertex"), model.selection("VERTEX", "Sketch_1/SketchLine_3_EndVertex"), model.selection("VERTEX", "Sketch_1/SketchPoint_13"), model.selection("VERTEX", "Sketch_1/SketchLine_1_StartVertex"), model.selection("VERTEX", "Sketch_1/SketchPoint_14"), model.selection("VERTEX", "Sketch_1/SketchPoint_2"), model.selection("VERTEX", "Sketch_1/SketchPoint_6"), model.selection("VERTEX", "Sketch_1/SketchPoint_1"), model.selection("VERTEX", "Sketch_1/SketchPoint_4"), model.selection("VERTEX", "Sketch_1/SketchPoint_5")]
  97 Vertex_1 = model.addVertex(Part_1_doc, Vertex_1_objects)
  98 Extrusion_1_objects = [model.selection("VERTEX", "Vertex_1_1"), model.selection("VERTEX", "Vertex_1_2"), model.selection("VERTEX", "Vertex_1_3"), model.selection("VERTEX", "Vertex_1_4"), model.selection("VERTEX", "Vertex_1_5"), model.selection("VERTEX", "Vertex_1_6"), model.selection("VERTEX", "Vertex_1_7"), model.selection("VERTEX", "Vertex_1_8"), model.selection("VERTEX", "Vertex_1_9"), model.selection("VERTEX", "Vertex_1_10"), model.selection("VERTEX", "Vertex_1_11"), model.selection("VERTEX", "Vertex_1_12"), model.selection("VERTEX", "Vertex_1_13"), model.selection("VERTEX", "Vertex_1_14"), model.selection("VERTEX", "Vertex_1_15"), model.selection("VERTEX", "Vertex_1_16"), model.selection("VERTEX", "Vertex_1_17"), model.selection("VERTEX", "Vertex_1_18")]
  99 Extrusion_1 = model.addExtrusion(Part_1_doc, Extrusion_1_objects, model.selection("EDGE", "PartSet/OZ"), 100, 0)
 100 Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_1_12/To_Vertex"), model.selection("VERTEX", "Extrusion_1_13/To_Vertex"), model.selection("VERTEX", "Extrusion_1_3/To_Vertex"))
 101 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 102 SketchLine_7 = Sketch_2.addLine(-717.0963364993213, -45.06817090071282, -717.0963364993213, -180.9380775505473)
 103 SketchPoint_13 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_12/To_Vertex"))
 104 SketchPoint_13.setName("SketchPoint_15")
 105 SketchPoint_13.result().setName("SketchPoint_15")
 106 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_7.startPoint(), SketchPoint_13.result())
 107 SketchPoint_14 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/To_Vertex"))
 108 SketchPoint_14.setName("SketchPoint_16")
 109 SketchPoint_14.result().setName("SketchPoint_16")
 110 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchPoint_14.result())
 111 SketchLine_8 = Sketch_2.addLine(-717.0963364993213, -180.9380775505473, -102.0809741405142, -180.9380775505473)
 112 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
 113 SketchPoint_15 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_3/To_Vertex"))
 114 SketchPoint_15.setName("SketchPoint_17")
 115 SketchPoint_15.result().setName("SketchPoint_17")
 116 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchPoint_15.result())
 117 SketchLine_9 = Sketch_2.addLine(-102.0809741405142, -180.9380775505473, -102.0809741405142, 193.0685819822336)
 118 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
 119 SketchPoint_16 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_10/To_Vertex"))
 120 SketchPoint_16.setName("SketchPoint_18")
 121 SketchPoint_16.result().setName("SketchPoint_18")
 122 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchPoint_16.result())
 123 SketchLine_10 = Sketch_2.addLine(-102.0809741405142, 193.0685819822336, -254.8675173043772, 193.0685819822336)
 124 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
 125 SketchPoint_17 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_5/To_Vertex"))
 126 SketchPoint_17.setName("SketchPoint_19")
 127 SketchPoint_17.result().setName("SketchPoint_19")
 128 SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchPoint_17.result())
 129 SketchLine_11 = Sketch_2.addLine(-254.8675173043772, 193.0685819822336, -254.8675173043772, -45.06817090071281)
 130 SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
 131 SketchPoint_18 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_9/To_Vertex"))
 132 SketchPoint_18.setName("SketchPoint_20")
 133 SketchPoint_18.result().setName("SketchPoint_20")
 134 SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchPoint_18.result())
 135 SketchLine_12 = Sketch_2.addLine(-254.8675173043772, -45.06817090071281, -717.0963364993213, -45.06817090071282)
 136 SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
 137 SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchLine_7.startPoint(), SketchLine_12.endPoint())
 138 SketchConstraintCoincidence_31 = Sketch_2.setCoincident(SketchPoint_13.coordinates(), SketchLine_12.endPoint())
 139 SketchLine_13 = Sketch_2.addLine(-599.2405881202537, -45.06817090071282, -584.1248303934869, -180.9380775505472)
 140 SketchConstraintCoincidence_32 = Sketch_2.setCoincident(SketchLine_13.startPoint(), SketchLine_12.result())
 141 SketchPoint_19 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_13/To_Vertex"))
 142 SketchPoint_19.setName("SketchPoint_21")
 143 SketchPoint_19.result().setName("SketchPoint_21")
 144 SketchConstraintCoincidence_33 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchPoint_19.result())
 145 SketchLine_14 = Sketch_2.addLine(-356.1736770691994, -45.06817090071282, -342.6051560379917, -180.9380775505472)
 146 SketchPoint_20 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_15/To_Vertex"))
 147 SketchPoint_20.setName("SketchPoint_22")
 148 SketchPoint_20.result().setName("SketchPoint_22")
 149 SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchLine_14.startPoint(), SketchPoint_20.result())
 150 SketchPoint_21 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_11/To_Vertex"))
 151 SketchPoint_21.setName("SketchPoint_23")
 152 SketchPoint_21.result().setName("SketchPoint_23")
 153 SketchConstraintCoincidence_35 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchPoint_21.result())
 154 SketchLine_15 = Sketch_2.addLine(-254.8675173043772, -45.06817090071281, -102.0809741405142, -49.89915168208545)
 155 SketchConstraintCoincidence_36 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_15.startPoint())
 156 SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchPoint_18.coordinates(), SketchLine_15.startPoint())
 157 SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchLine_12.startPoint(), SketchLine_15.startPoint())
 158 SketchConstraintCoincidence_39 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_9.result())
 159 model.do()
 160 Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_7r-SketchLine_8f-SketchLine_13r-SketchLine_12f_wire")])
 161 Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_8f-SketchLine_14r-SketchLine_12f-SketchLine_13f_wire")])
 162 Face_3 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_8f-SketchLine_9f-SketchLine_15r-SketchLine_12f-SketchLine_14f_wire")])
 163 Face_4 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_9f-SketchLine_10f-SketchLine_11f-SketchLine_15f_wire")])
 164 Partition_1_objects = [model.selection("EDGE", "Extrusion_1_1"), model.selection("EDGE", "Extrusion_1_2"), model.selection("EDGE", "Extrusion_1_3"), model.selection("EDGE", "Extrusion_1_4"), model.selection("EDGE", "Extrusion_1_5"), model.selection("EDGE", "Extrusion_1_6"), model.selection("EDGE", "Extrusion_1_7"), model.selection("EDGE", "Extrusion_1_8"), model.selection("EDGE", "Extrusion_1_9"), model.selection("EDGE", "Extrusion_1_10"), model.selection("EDGE", "Extrusion_1_11"), model.selection("EDGE", "Extrusion_1_12"), model.selection("EDGE", "Extrusion_1_13"), model.selection("EDGE", "Extrusion_1_14"), model.selection("EDGE", "Extrusion_1_15"), model.selection("EDGE", "Extrusion_1_16"), model.selection("EDGE", "Extrusion_1_17"), model.selection("EDGE", "Extrusion_1_18"), model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1"), model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_4_1")]
 165 Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects)
 166 model.do()
 167 model.end()
 168
 169 from ModelAPI import *
 170
 171 PartitionFeature = Partition_1.feature()
 172 assert(len(PartitionFeature.results()) == 1)
 173 PartitionResult = modelAPI_ResultBody(PartitionFeature.firstResult())
 174 assert(PartitionResult.numberOfSubs() == 22)
 175
 176 assert(model.checkPythonDump())
 177