src/FeaturesPlugin/Test/Test19066.py

   1 # Copyright (C) 2020-2023  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(19.10387596899224, 5.793798449612405, 19.10387596899224, 27.4031007751938)
  28 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
  29 SketchLine_2 = Sketch_1.addLine(19.10387596899224, 27.4031007751938, 74.84961240310078, 27.4031007751938)
  30 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  31 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_2.result())
  32 SketchLine_3 = Sketch_1.addLine(74.84961240310078, 27.4031007751938, 74.84961240310078, 54.0232558139535)
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  34 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_3.result())
  35 SketchLine_4 = Sketch_1.addLine(74.84961240310078, 54.0232558139535, 102.0961240310078, 54.0232558139535)
  36 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  37 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
  38 SketchLine_5 = Sketch_1.addLine(102.0961240310078, 54.0232558139535, 102.0961240310078, 26.77674418604651)
  39 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  40 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_5.result())
  41 SketchLine_6 = Sketch_1.addLine(102.0961240310078, 26.77674418604651, 136.2325581395349, 26.77674418604651)
  42 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  43 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
  44 SketchLine_7 = Sketch_1.addLine(136.2325581395349, 26.77674418604651, 136.2325581395349, 0.4697674418604749)
  45 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  46 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_7.result())
  47 SketchLine_8 = Sketch_1.addLine(136.2325581395349, 0.4697674418604749, 103.9751937984496, 0.4697674418604749)
  48 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  49 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result())
  50 SketchLine_9 = Sketch_1.addLine(103.9751937984496, 0.4697674418604749, 103.9751937984496, -20.82635658914729)
  51 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  52 SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_9.result())
  53 SketchLine_10 = Sketch_1.addLine(103.9751937984496, -20.82635658914729, 77.35503875968993, -18.63410852713179)
  54 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  55 SketchLine_11 = Sketch_1.addLine(77.35503875968993, -18.63410852713179, 76.10232558139535, 9.238759689922478)
  56 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  57 SketchLine_12 = Sketch_1.addLine(76.10232558139535, 9.238759689922478, 19.10387596899224, 5.793798449612405)
  58 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  59 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_12.endPoint())
  60 SketchPoint_1 = Sketch_1.addPoint(88.97935811509896, 16.06459344588224)
  61 model.do()
  62 Wire_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_7"), model.selection("EDGE", "Sketch_1/SketchLine_9"), model.selection("EDGE", "Sketch_1/SketchLine_6"), model.selection("EDGE", "Sketch_1/SketchLine_8"), model.selection("EDGE", "Sketch_1/SketchLine_10"), model.selection("EDGE", "Sketch_1/SketchLine_5"), model.selection("EDGE", "Sketch_1/SketchLine_11"), model.selection("EDGE", "Sketch_1/SketchLine_4"), model.selection("EDGE", "Sketch_1/SketchLine_2"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchLine_12"), model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("WIRE", "Sketch_1/Face-SketchLine_12r-SketchLine_11r-SketchLine_10r-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r-SketchLine_5r-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r_wire")]
  63 Wire_1 = model.addWire(Part_1_doc, Wire_1_objects, False)
  64 Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), 100, False)
  65 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
  66 SketchLine_13 = Sketch_2.addLine(54.51293454413378, 26.90644687116999, 78.22337943042922, 26.90644687116999)
  67 SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_13.result())
  68 SketchLine_14 = Sketch_2.addLine(78.22337943042922, 26.90644687116999, 78.22337943042922, 42.49687638544646)
  69 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  70 SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_14.result())
  71 SketchLine_15 = Sketch_2.addLine(78.22337943042922, 42.49687638544646, 92.18980587030188, 42.49687638544646)
  72 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
  73 SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_15.result())
  74 SketchLine_16 = Sketch_2.addLine(92.18980587030188, 42.49687638544646, 92.18980587030188, 26.25684564140846)
  75 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
  76 SketchConstraintVertical_7 = Sketch_2.setVertical(SketchLine_16.result())
  77 SketchLine_17 = Sketch_2.addLine(92.18980587030188, 26.25684564140846, 103.5578273911285, 24.63284256700466)
  78 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
  79 SketchLine_18 = Sketch_2.addLine(103.5578273911285, 24.63284256700466, 103.5578273911285, 15.21362473546265)
  80 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
  81 SketchConstraintVertical_8 = Sketch_2.setVertical(SketchLine_18.result())
  82 SketchLine_19 = Sketch_2.addLine(103.5578273911285, 15.21362473546265, 94.13860955958643, 16.83762780986643)
  83 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
  84 SketchLine_20 = Sketch_2.addLine(94.13860955958643, 16.83762780986643, 94.78821078934796, 9.367213667608976)
  85 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
  86 SketchLine_21 = Sketch_2.addLine(94.78821078934796, 9.367213667608976, 83.42018926852137, 11.96561858665505)
  87 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
  88 SketchLine_22 = Sketch_2.addLine(83.42018926852137, 11.96561858665505, 83.09538865364063, 18.13683026938948)
  89 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_21.endPoint(), SketchLine_22.startPoint())
  90 SketchLine_23 = Sketch_2.addLine(83.09538865364063, 18.13683026938948, 60.03454499710668, 20.08563395867403)
  91 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
  92 SketchLine_24 = Sketch_2.addLine(60.03454499710668, 20.08563395867403, 54.51293454413378, 26.90644687116999)
  93 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_23.endPoint(), SketchLine_24.startPoint())
  94 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_13.startPoint(), SketchLine_24.endPoint())
  95 SketchPoint_2 = Sketch_2.addPoint(86.98316963342577, 22.7185550514595)
  96 model.do()
  97 Wire_2_objects = [model.selection("EDGE", "Sketch_2/SketchLine_13"), model.selection("EDGE", "Sketch_2/SketchLine_24"), model.selection("EDGE", "Sketch_2/SketchLine_23"), model.selection("EDGE", "Sketch_2/SketchLine_22"), model.selection("EDGE", "Sketch_2/SketchLine_21"), model.selection("EDGE", "Sketch_2/SketchLine_20"), model.selection("EDGE", "Sketch_2/SketchLine_19"), model.selection("EDGE", "Sketch_2/SketchLine_18"), model.selection("EDGE", "Sketch_2/SketchLine_17"), model.selection("EDGE", "Sketch_2/SketchLine_16"), model.selection("EDGE", "Sketch_2/SketchLine_15"), model.selection("EDGE", "Sketch_2/SketchLine_14")]
  98 Wire_2 = model.addWire(Part_1_doc, Wire_2_objects, False)
  99 Edge_1 = model.addEdge(Part_1_doc, model.selection("VERTEX", "Sketch_1/SketchPoint_1"), model.selection("VERTEX", "Sketch_2/SketchPoint_2"))
 100 Pipe_1 = model.addPipe(Part_1_doc, [model.selection("WIRE", "Wire_1_1"), model.selection("WIRE", "Wire_2_1")], model.selection("EDGE", "Edge_1_1"), [])
 101
 102 model.end()
 103
 104 from GeomAPI import *
 105
 106 model.testNbResults(Pipe_1, 1)
 107 model.testNbSubResults(Pipe_1, [0])
 108 model.testNbSubShapes(Pipe_1, GeomAPI_Shape.SOLID, [0])
 109 model.testNbSubShapes(Pipe_1, GeomAPI_Shape.FACE, [12])
 110 model.testNbSubShapes(Pipe_1, GeomAPI_Shape.EDGE, [48])
 111 model.testNbSubShapes(Pipe_1, GeomAPI_Shape.VERTEX, [96])
 112 model.testResultsAreas(Pipe_1, [27370.29819])
 113
 114 assert(model.checkPythonDump())