src/FeaturesPlugin/Test/Test18836.py

   1 # Copyright (C) 2014-2023  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(141.7325102880659, 0, 0, 0)
  28 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
  29 SketchPoint_1 = SketchProjection_1.createdFeature()
  30 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchPoint_1.result())
  31 SketchLine_2 = Sketch_1.addLine(0, 0, 0, 87.1454046639232)
  32 SketchLine_3 = Sketch_1.addLine(0, 87.1454046639232, 141.7325102880659, 87.1454046639232)
  33 SketchLine_4 = Sketch_1.addLine(141.7325102880659, 87.1454046639232, 141.7325102880659, 0)
  34 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  35 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  37 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  38 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  39 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  40 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  41 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  42 SketchLine_5 = Sketch_1.addLine(48.25918560939968, 36.68732867484031, -63.06551064348577, 36.68732867484031)
  43 SketchLine_6 = Sketch_1.addLine(-63.06551064348577, 36.68732867484031, -63.06551064348577, -40.64885412030576)
  44 SketchLine_7 = Sketch_1.addLine(-63.06551064348577, -40.64885412030576, 48.25918560939968, -40.64885412030576)
  45 SketchLine_8 = Sketch_1.addLine(48.25918560939968, -40.64885412030576, 48.25918560939968, 36.68732867484031)
  46 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  47 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  48 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  49 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  50 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
  51 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
  52 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
  53 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
  54 SketchLine_9 = Sketch_1.addLine(-12.82162118421888, 83.48310807317709, -70.45431791690731, 83.48310807317709)
  55 SketchLine_10 = Sketch_1.addLine(-70.45431791690731, 83.48310807317709, -70.45431791690731, 46.53907170606908)
  56 SketchLine_11 = Sketch_1.addLine(-70.45431791690731, 46.53907170606908, -12.82162118421888, 46.53907170606908)
  57 SketchLine_12 = Sketch_1.addLine(-12.82162118421888, 46.53907170606908, -12.82162118421888, 83.48310807317709)
  58 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
  59 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  60 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  61 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  62 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_9.result())
  63 SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_10.result())
  64 SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_11.result())
  65 SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_12.result())
  66 model.do()
  67 Wire_1 = model.addWire(Part_1_doc, [model.selection("COMPOUND", "all-in-Sketch_1")], True)
  68 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "all-in-Wire_1")], model.selection("EDGE", "PartSet/OZ"), 10, 0)
  69 Edge_1 = model.addEdge(Part_1_doc, [model.selection("COMPOUND", "all-in-Sketch_1")], True)
  70 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "all-in-Edge_1")], model.selection("EDGE", "PartSet/OZ"), -10, 0)
  71 model.end()
  72
  73 from GeomAPI import *
  74
  75 model.testNbResults(Extrusion_1, 1)
  76 model.testNbSubResults(Extrusion_1, [3])
  77 model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.SOLID, [0])
  78 model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.FACE, [16])
  79 model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.EDGE, [64])
  80 model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.VERTEX, [128])
  81 model.testResultsAreas(Extrusion_1, [10242.31054])
  82
  83 model.testNbResults(Extrusion_2, 1)
  84 model.testNbSubResults(Extrusion_2, [16])
  85 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.SOLID, [0])
  86 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.FACE, [16])
  87 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.EDGE, [64])
  88 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.VERTEX, [128])
  89 model.testResultsAreas(Extrusion_2, [10242.31054])
  90
  91 assert(model.checkPythonDump())