src/FeaturesPlugin/Test/Test1876.py

   1 # Copyright (C) 2014-2023  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21 from ModelAPI import *
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(396.8373493975904, 115.9638554216867, -225.1506024096385, 115.9638554216867)
  29 SketchLine_2 = Sketch_1.addLine(-225.1506024096385, 115.9638554216867, -225.1506024096385, -149.0963855421687)
  30 SketchLine_3 = Sketch_1.addLine(-225.1506024096385, -149.0963855421687, 396.8373493975904, -149.0963855421687)
  31 SketchLine_4 = Sketch_1.addLine(396.8373493975904, -149.0963855421687, 396.8373493975904, 115.9638554216867)
  32 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  34 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  35 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  36 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  37 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  38 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  39 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  40 model.do()
  41 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  42 SketchCircle_1 = Sketch_2.addCircle(-348.644578313253, 155.1204819277109, 207.6894050099908)
  43 model.do()
  44 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f")], model.selection(), 100, 0)
  45 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_1_2r")], model.selection(), 100, 0)
  46 Group_1 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1")])
  47 Group_2 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")])
  48 Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1")])
  49 model.end()
  50
  51 # move groups
  52 model.begin()
  53 Part_1_doc.moveFeature(Group_1.feature(), Partition_1.feature())
  54 Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
  55 model.end()
  56
  57 # check each group contain two results: one is related to original body only, another - common part
  58
  59 aFactory = ModelAPI_Session.get().validators()
  60 assert(aFactory.validate(Group_1.feature()))
  61 assert(aFactory.validate(Group_2.feature()))
  62 aList1 = Group_1.feature().selectionList("group_list")
  63 aList2 = Group_2.feature().selectionList("group_list")
  64 assert(aList1.size() == 2)
  65 assert(aList2.size() == 2)
  66 assert(aList1.value(0).value().shapeTypeStr() == "SOLID")
  67 assert(aList1.value(1).value().shapeTypeStr() == "SOLID")
  68 assert(aList2.value(0).value().shapeTypeStr() == "SOLID")
  69 assert(aList2.value(1).value().shapeTypeStr() == "SOLID")
  70 assert(aList1.value(0).value().isSame(aList2.value(0).value()) or aList1.value(1).value().isSame(aList2.value(0).value()) or
  71 aList1.value(0).value().isSame(aList2.value(1).value()) or aList1.value(1).value().isSame(aList2.value(1).value()))