src/FeaturesPlugin/Test/Test1467.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 # Create document
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28
  29 # Create base and path for pipe
  30 Point_2 = model.addPoint(Part_1_doc, 5, 20, 0)
  31 Point_3 = model.addPoint(Part_1_doc, 0, 40, 30)
  32 Point_4 = model.addPoint(Part_1_doc, 10, 50, 70)
  33 Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_1")])
  34 Vertex_2 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "PartSet/Origin")])
  35 Vertex_3 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_2")])
  36 Vertex_4 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_3")])
  37 Sketch_1 = model.addSketch(Part_1_doc, model.standardPlane("YOZ"))
  38 SketchLine_1 = Sketch_1.addLine(14.65001594578831, -16.75950688440132, 21.53989436538019, 4.084511469683225)
  39 SketchLine_1.setName("SketchLine_2")
  40 SketchLine_1.result().setName("SketchLine_1")
  41 SketchLine_1.result().setColor(225, 0, 0)
  42 SketchLine_2 = Sketch_1.addLine(21.53989436538019, 4.084511469683225, 17.92440575878417, 20.67042582762886)
  43 SketchLine_2.setName("SketchLine_3")
  44 SketchLine_2.result().setName("SketchLine_3")
  45 SketchLine_2.result().setColor(225, 0, 0)
  46 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  47 SketchConstraintCoincidence_1.setName("SketchConstraintCoincidence_2")
  48 SketchLine_3 = Sketch_1.addLine(17.92440575878417, 20.67042582762886, 6.041293582700577, 31.26820121140768)
  49 SketchLine_3.setName("SketchLine_4")
  50 SketchLine_3.result().setName("SketchLine_4")
  51 SketchLine_3.result().setColor(225, 0, 0)
  52 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  53 SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_3")
  54 SketchArc_1 = Sketch_1.addArc(15.73021805614924, 42.13223372900752, 6.041293582700577, 31.26820121140768, 1.302016307518145, 40.2010542198842, True)
  55 SketchArc_1.result().setColor(225, 0, 0)
  56 SketchArc_1.results()[1].setColor(225, 0, 0)
  57 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.endPoint())
  58 SketchConstraintCoincidence_3.setName("SketchConstraintCoincidence_4")
  59 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_3.result())
  60 SketchArc_2 = Sketch_1.addArc(5.884297127208473, -13.86204556507233, 14.65001594578831, -16.75950688440132, -3.31891814825968, -14.59275556007859, True)
  61 SketchArc_2.result().setColor(225, 0, 0)
  62 SketchArc_2.results()[1].setColor(225, 0, 0)
  63 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_1.startPoint())
  64 SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_9")
  65 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_1.result())
  66 SketchConstraintRigid_1 = Sketch_1.setFixed(SketchArc_1.startPoint())
  67 SketchConstraintRigid_2 = Sketch_1.setFixed(SketchLine_2.endPoint())
  68 model.do()
  69 Wire_1_objects = [model.selection("EDGE", "Sketch_1/Edge-SketchArc_2_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), model.selection("EDGE", "Sketch_1/Edge-SketchArc_1_2")]
  70 Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
  71 Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
  72 SketchLine_4 = Sketch_2.addLine(9.525599451781, 2.539525405208, -21.231656152164, 2.539525405208)
  73 SketchLine_4.setName("SketchLine_5")
  74 SketchLine_4.result().setName("SketchLine_5")
  75 SketchLine_5 = Sketch_2.addLine(-21.231656152164, 2.539525405208, -21.231656152164, -7.57049842757)
  76 SketchLine_5.setName("SketchLine_6")
  77 SketchLine_5.result().setName("SketchLine_6")
  78 SketchLine_6 = Sketch_2.addLine(-21.231656152164, -7.57049842757, 9.525599451781, -7.57049842757)
  79 SketchLine_6.setName("SketchLine_7")
  80 SketchLine_6.result().setName("SketchLine_7")
  81 SketchLine_7 = Sketch_2.addLine(9.525599451781, -7.57049842757, 9.525599451781, 2.539525405208)
  82 SketchLine_7.setName("SketchLine_8")
  83 SketchLine_7.result().setName("SketchLine_8")
  84 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_4.startPoint())
  85 SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_5")
  86 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  87 SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_6")
  88 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  89 SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_7")
  90 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  91 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_8")
  92 SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_4.result())
  93 SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_5.result())
  94 SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_6.result())
  95 SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_7.result())
  96 model.do()
  97
  98 # Create pipe on the entire path (big pipe)
  99 Pipe_1 = model.addPipe(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection("WIRE", "Wire_1_1"))
 100
 101 # Create pipe on the fisrt segment of the path (small pipe)
 102 Pipe_2 = model.addPipe(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection("EDGE", "Sketch_1/Edge-SketchArc_2_2"))
 103
 104 # Cut big pipe from the small pipe
 105 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Pipe_2_1")], [model.selection("SOLID", "Pipe_1_1")])
 106 model.do()
 107
 108 # Check that the small pipe is a part of the big one
 109 assert(len(Cut_1.results()) == 0)
 110
 111 model.end()