src/FeaturesPlugin/Test/Test1467.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Point_2 = model.addPoint(Part_1_doc, 5, 20, 0)
  27 Point_3 = model.addPoint(Part_1_doc, 0, 40, 30)
  28 Point_4 = model.addPoint(Part_1_doc, 10, 50, 70)
  29 Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_1")])
  30 Vertex_2 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "PartSet/Origin")])
  31 Vertex_3 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_2")])
  32 Vertex_4 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_3")])
  33 Sketch_1 = model.addSketch(Part_1_doc, model.standardPlane("YOZ"))
  34 SketchLine_1 = Sketch_1.addLine(14.65001594578831, -16.75950688440132, 21.53989436538019, 4.084511469683225)
  35 SketchLine_1.setName("SketchLine_2")
  36 SketchLine_1.result().setName("SketchLine_1")
  37 SketchLine_2 = Sketch_1.addLine(21.53989436538019, 4.084511469683225, 17.92440575878417, 20.67042582762886)
  38 SketchLine_2.setName("SketchLine_3")
  39 SketchLine_2.result().setName("SketchLine_3")
  40 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  41 SketchConstraintCoincidence_1.setName("SketchConstraintCoincidence_2")
  42 SketchLine_3 = Sketch_1.addLine(17.92440575878417, 20.67042582762886, 6.041293582700577, 31.26820121140768)
  43 SketchLine_3.setName("SketchLine_4")
  44 SketchLine_3.result().setName("SketchLine_4")
  45 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  46 SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_3")
  47 SketchArc_1 = Sketch_1.addArc(15.73021805614924, 42.13223372900752, 6.041293582700577, 31.26820121140768, 1.302016307518145, 40.2010542198842, True)
  48 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.endPoint())
  49 SketchConstraintCoincidence_3.setName("SketchConstraintCoincidence_4")
  50 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_3.result())
  51 SketchArc_2 = Sketch_1.addArc(5.884297127208473, -13.86204556507233, 14.65001594578831, -16.75950688440132, -3.31891814825968, -14.59275556007859, True)
  52 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_1.startPoint())
  53 SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_9")
  54 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_1.result())
  55 SketchConstraintRigid_1 = Sketch_1.setFixed(SketchArc_1.startPoint())
  56 SketchConstraintRigid_2 = Sketch_1.setFixed(SketchLine_2.endPoint())
  57 model.do()
  58 Wire_1_objects = [model.selection("EDGE", "Sketch_1/SketchArc_2_2"), model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchLine_4"), model.selection("EDGE", "Sketch_1/SketchArc_1_2")]
  59 Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
  60 Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
  61 SketchLine_4 = Sketch_2.addLine(9.525599451781, 2.539525405208, -21.231656152164, 2.539525405208)
  62 SketchLine_4.setName("SketchLine_5")
  63 SketchLine_4.result().setName("SketchLine_5")
  64 SketchLine_5 = Sketch_2.addLine(-21.231656152164, 2.539525405208, -21.231656152164, -7.57049842757)
  65 SketchLine_5.setName("SketchLine_6")
  66 SketchLine_5.result().setName("SketchLine_6")
  67 SketchLine_6 = Sketch_2.addLine(-21.231656152164, -7.57049842757, 9.525599451781, -7.57049842757)
  68 SketchLine_6.setName("SketchLine_7")
  69 SketchLine_6.result().setName("SketchLine_7")
  70 SketchLine_7 = Sketch_2.addLine(9.525599451781, -7.57049842757, 9.525599451781, 2.539525405208)
  71 SketchLine_7.setName("SketchLine_8")
  72 SketchLine_7.result().setName("SketchLine_8")
  73 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_4.startPoint())
  74 SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_5")
  75 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  76 SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_6")
  77 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  78 SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_7")
  79 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  80 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_8")
  81 SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_4.result())
  82 SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_5.result())
  83 SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_6.result())
  84 SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_7.result())
  85 model.do()
  86 Pipe_1 = model.addPipe(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection("WIRE", "Wire_1_1"))
  87 Pipe_2 = model.addPipe(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection("EDGE", "Sketch_1/SketchArc_2_2"))
  88 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Pipe_2_1")], [model.selection("SOLID", "Pipe_1_1")])
  89 model.do()
  90 model.end()
  91
  92 # Check that the small pipe is a part of the big one
  93 assert(len(Cut_1.results()) == 0)