src/FeaturesAPI/FeaturesAPI_Extrusion.cpp

   1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
   2
   3 // File:        FeaturesAPI_Extrusion.cpp
   4 // Created:     09 June 2016
   5 // Author:      Dmitry Bobylev
   6
   7 #include "FeaturesAPI_Extrusion.h"
   8
   9 #include <ModelHighAPI_Double.h>
  10 #include <ModelHighAPI_Dumper.h>
  11 #include <ModelHighAPI_Reference.h>
  12 #include <ModelHighAPI_Tools.h>
  13
  14 //==================================================================================================
  15 FeaturesAPI_Extrusion::FeaturesAPI_Extrusion(const std::shared_ptr<ModelAPI_Feature>& theFeature)
  16 : ModelHighAPI_Interface(theFeature)
  17 {
  18   initialize();
  19 }
  20
  21 //==================================================================================================
  22 FeaturesAPI_Extrusion::FeaturesAPI_Extrusion(const std::shared_ptr<ModelAPI_Feature>& theFeature,
  23                                              const std::list<ModelHighAPI_Selection>& theBaseObjects,
  24                                              const ModelHighAPI_Double& theSize)
  25 : ModelHighAPI_Interface(theFeature)
  26 {
  27   if(initialize()) {
  28     fillAttribute(theBaseObjects, mybaseObjects);
  29     setSizes(theSize, ModelHighAPI_Double());
  30   }
  31 }
  32
  33 //==================================================================================================
  34 FeaturesAPI_Extrusion::FeaturesAPI_Extrusion(const std::shared_ptr<ModelAPI_Feature>& theFeature,
  35                                              const std::list<ModelHighAPI_Selection>& theBaseObjects,
  36                                              const ModelHighAPI_Selection& theDirection,
  37                                              const ModelHighAPI_Double& theSize)
  38 : ModelHighAPI_Interface(theFeature)
  39 {
  40   if(initialize()) {
  41     fillAttribute(theBaseObjects, mybaseObjects);
  42     fillAttribute(theDirection, mydirection);
  43     setSizes(theSize, ModelHighAPI_Double());
  44   }
  45 }
  46
  47 //==================================================================================================
  48 FeaturesAPI_Extrusion::FeaturesAPI_Extrusion(const std::shared_ptr<ModelAPI_Feature>& theFeature,
  49                                              const std::list<ModelHighAPI_Selection>& theBaseObjects,
  50                                              const ModelHighAPI_Double& theToSize,
  51                                              const ModelHighAPI_Double& theFromSize)
  52 : ModelHighAPI_Interface(theFeature)
  53 {
  54   if(initialize()) {
  55     fillAttribute(theBaseObjects, mybaseObjects);
  56     setSizes(theToSize, theFromSize);
  57   }
  58 }
  59
  60 //==================================================================================================
  61 FeaturesAPI_Extrusion::FeaturesAPI_Extrusion(const std::shared_ptr<ModelAPI_Feature>& theFeature,
  62                                              const std::list<ModelHighAPI_Selection>& theBaseObjects,
  63                                              const ModelHighAPI_Selection& theDirection,
  64                                              const ModelHighAPI_Double& theToSize,
  65                                              const ModelHighAPI_Double& theFromSize)
  66 : ModelHighAPI_Interface(theFeature)
  67 {
  68   if(initialize()) {
  69     fillAttribute(theBaseObjects, mybaseObjects);
  70     fillAttribute(theDirection, mydirection);
  71     setSizes(theToSize, theFromSize);
  72   }
  73 }
  74
  75 //==================================================================================================
  76 FeaturesAPI_Extrusion::FeaturesAPI_Extrusion(const std::shared_ptr<ModelAPI_Feature>& theFeature,
  77                                              const std::list<ModelHighAPI_Selection>& theBaseObjects,
  78                                              const ModelHighAPI_Selection& theToObject,
  79                                              const ModelHighAPI_Double& theToOffset,
  80                                              const ModelHighAPI_Selection& theFromObject,
  81                                              const ModelHighAPI_Double& theFromOffset)
  82 : ModelHighAPI_Interface(theFeature)
  83 {
  84   if(initialize()) {
  85     fillAttribute(theBaseObjects, mybaseObjects);
  86     setPlanesAndOffsets(theToObject, theToOffset, theFromObject, theFromOffset);
  87   }
  88 }
  89
  90 //==================================================================================================
  91 FeaturesAPI_Extrusion::FeaturesAPI_Extrusion(const std::shared_ptr<ModelAPI_Feature>& theFeature,
  92                                              const std::list<ModelHighAPI_Selection>& theBaseObjects,
  93                                              const ModelHighAPI_Selection& theDirection,
  94                                              const ModelHighAPI_Selection& theToObject,
  95                                              const ModelHighAPI_Double& theToOffset,
  96                                              const ModelHighAPI_Selection& theFromObject,
  97                                              const ModelHighAPI_Double& theFromOffset)
  98 : ModelHighAPI_Interface(theFeature)
  99 {
 100   if(initialize()) {
 101     fillAttribute(theBaseObjects, mybaseObjects);
 102     fillAttribute(theDirection, mydirection);
 103     setPlanesAndOffsets(theToObject, theToOffset, theFromObject, theFromOffset);
 104   }
 105 }
 106
 107 //==================================================================================================
 108 FeaturesAPI_Extrusion::~FeaturesAPI_Extrusion()
 109 {
 110 }
 111
 112 //==================================================================================================
 113 void FeaturesAPI_Extrusion::setNestedSketch(const ModelHighAPI_Reference& theSketch)
 114 {
 115   mysketch->setValue(theSketch.feature());
 116
 117   // To make Sketch feature execute and subfeatures execute.
 118   feature()->document()->setCurrentFeature(feature(), false);
 119
 120   // to inform that the history is updated due to the sketch moved under the composite feature
 121   if (theSketch.feature().get()) {
 122     theSketch.feature()->document()->updateHistory(ModelAPI_Feature::group());
 123     if (theSketch.feature()->firstResult().get())
 124       theSketch.feature()->firstResult()->setDisplayed(false);
 125   }
 126   mybaseObjects->clear();
 127   mybaseObjects->append(theSketch.feature()->firstResult(), GeomShapePtr());
 128
 129   execIfBaseNotEmpty();
 130 }
 131
 132 //==================================================================================================
 133 void FeaturesAPI_Extrusion::setBase(const std::list<ModelHighAPI_Selection>& theBaseObjects)
 134 {
 135   mysketch->setValue(ObjectPtr());
 136   mybaseObjects->clear();
 137   fillAttribute(theBaseObjects, mybaseObjects);
 138
 139   execIfBaseNotEmpty();
 140 }
 141
 142 //==================================================================================================
 143 void FeaturesAPI_Extrusion::setDirection(const ModelHighAPI_Selection& theDirection)
 144 {
 145   fillAttribute(theDirection, mydirection);
 146
 147   execIfBaseNotEmpty();
 148 }
 149
 150 //==================================================================================================
 151 void FeaturesAPI_Extrusion::setSizes(const ModelHighAPI_Double& theToSize,
 152                                      const ModelHighAPI_Double& theFromSize)
 153 {
 154   fillAttribute(FeaturesPlugin_Extrusion::CREATION_METHOD_BY_SIZES(), mycreationMethod);
 155   fillAttribute(theToSize, mytoSize);
 156   fillAttribute(theFromSize, myfromSize);
 157
 158   execIfBaseNotEmpty();
 159 }
 160
 161 //==================================================================================================
 162 void FeaturesAPI_Extrusion::setSize(const ModelHighAPI_Double& theSize)
 163 {
 164   fillAttribute(FeaturesPlugin_Extrusion::CREATION_METHOD_BY_SIZES(), mycreationMethod);
 165   fillAttribute(theSize, mytoSize);
 166   fillAttribute(ModelHighAPI_Double(), myfromSize);
 167
 168   execIfBaseNotEmpty();
 169 }
 170
 171 //==================================================================================================
 172 void FeaturesAPI_Extrusion::setPlanesAndOffsets(const ModelHighAPI_Selection& theToObject,
 173                                                 const ModelHighAPI_Double& theToOffset,
 174                                                 const ModelHighAPI_Selection& theFromObject,
 175                                                 const ModelHighAPI_Double& theFromOffset)
 176 {
 177   fillAttribute(FeaturesPlugin_Extrusion::CREATION_METHOD_BY_PLANES(), mycreationMethod);
 178   fillAttribute(theToObject, mytoObject);
 179   fillAttribute(theToOffset, mytoOffset);
 180   fillAttribute(theFromObject, myfromObject);
 181   fillAttribute(theFromOffset, myfromOffset);
 182
 183   execIfBaseNotEmpty();
 184 }
 185
 186 //==================================================================================================
 187 void FeaturesAPI_Extrusion::dump(ModelHighAPI_Dumper& theDumper) const
 188 {
 189   FeaturePtr aBase = feature();
 190   const std::string& aDocName = theDumper.name(aBase->document());
 191
 192   AttributeReferencePtr anAttrSketch = aBase->reference(FeaturesPlugin_Extrusion::SKETCH_ID());
 193   AttributeSelectionListPtr anAttrObjects = aBase->selectionList(FeaturesPlugin_Extrusion::BASE_OBJECTS_ID());
 194   AttributeSelectionPtr anAttrDirection = aBase->selection(FeaturesPlugin_Extrusion::DIRECTION_OBJECT_ID());
 195
 196   theDumper << aBase << " = model.addExtrusion(" << aDocName << ", ";
 197   anAttrSketch->isInitialized() ? theDumper << "[]" : theDumper << anAttrObjects;
 198   theDumper << ", " << anAttrDirection;
 199
 200   std::string aCreationMethod = aBase->string(FeaturesPlugin_Extrusion::CREATION_METHOD())->value();
 201
 202   if(aCreationMethod == FeaturesPlugin_Extrusion::CREATION_METHOD_BY_SIZES()) {
 203     AttributeDoublePtr anAttrToSize = aBase->real(FeaturesPlugin_Extrusion::TO_SIZE_ID());
 204     AttributeDoublePtr anAttrFromSize = aBase->real(FeaturesPlugin_Extrusion::FROM_SIZE_ID());
 205
 206     theDumper << ", " << anAttrToSize << ", " << anAttrFromSize;
 207   } else if(aCreationMethod == FeaturesPlugin_Extrusion::CREATION_METHOD_BY_PLANES()) {
 208     AttributeSelectionPtr anAttrToObject = aBase->selection(FeaturesPlugin_Extrusion::TO_OBJECT_ID());
 209     AttributeDoublePtr anAttrToOffset = aBase->real(FeaturesPlugin_Extrusion::TO_OFFSET_ID());
 210     AttributeSelectionPtr anAttrFromObject = aBase->selection(FeaturesPlugin_Extrusion::FROM_OBJECT_ID());
 211     AttributeDoublePtr anAttrFromOffset = aBase->real(FeaturesPlugin_Extrusion::FROM_OFFSET_ID());
 212
 213     theDumper << ", " << anAttrToObject << ", " << anAttrToOffset << ", " << anAttrFromObject << ", " << anAttrFromOffset;
 214   }
 215
 216   theDumper << ")" << std::endl;
 217
 218   if(anAttrSketch->isInitialized()) {
 219     theDumper << aBase << ".setNestedSketch(" << anAttrSketch << ")" << std::endl;
 220   }
 221 }
 222
 223 //==================================================================================================
 224 void FeaturesAPI_Extrusion::execIfBaseNotEmpty()
 225 {
 226   if(mybaseObjects->size() > 0) {
 227     execute();
 228   }
 229 }
 230
 231 //==================================================================================================
 232 ExtrusionPtr addExtrusion(const std::shared_ptr<ModelAPI_Document>& thePart,
 233                           const std::list<ModelHighAPI_Selection>& theBaseObjects,
 234                           const ModelHighAPI_Double& theSize)
 235 {
 236   std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_Extrusion::ID());
 237   return ExtrusionPtr(new FeaturesAPI_Extrusion(aFeature, theBaseObjects, theSize));
 238 }
 239
 240 //==================================================================================================
 241 ExtrusionPtr addExtrusion(const std::shared_ptr<ModelAPI_Document>& thePart,
 242                           const std::list<ModelHighAPI_Selection>& theBaseObjects,
 243                           const ModelHighAPI_Selection& theDirection,
 244                           const ModelHighAPI_Double& theSize)
 245 {
 246   std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_Extrusion::ID());
 247   return ExtrusionPtr(new FeaturesAPI_Extrusion(aFeature, theBaseObjects, theDirection, theSize));
 248 }
 249
 250 //==================================================================================================
 251 ExtrusionPtr addExtrusion(const std::shared_ptr<ModelAPI_Document>& thePart,
 252                           const std::list<ModelHighAPI_Selection>& theBaseObjects,
 253                           const ModelHighAPI_Double& theToSize,
 254                           const ModelHighAPI_Double& theFromSize)
 255 {
 256   std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_Extrusion::ID());
 257   return ExtrusionPtr(new FeaturesAPI_Extrusion(aFeature, theBaseObjects, theToSize, theFromSize));
 258 }
 259
 260 //==================================================================================================
 261 ExtrusionPtr addExtrusion(const std::shared_ptr<ModelAPI_Document>& thePart,
 262                           const std::list<ModelHighAPI_Selection>& theBaseObjects,
 263                           const ModelHighAPI_Selection& theDirection,
 264                           const ModelHighAPI_Double& theToSize,
 265                           const ModelHighAPI_Double& theFromSize)
 266 {
 267   std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_Extrusion::ID());
 268   return ExtrusionPtr(new FeaturesAPI_Extrusion(aFeature,
 269                                                 theBaseObjects,
 270                                                 theDirection,
 271                                                 theToSize,
 272                                                 theFromSize));
 273 }
 274
 275 //==================================================================================================
 276 ExtrusionPtr addExtrusion(const std::shared_ptr<ModelAPI_Document>& thePart,
 277                           const std::list<ModelHighAPI_Selection>& theBaseObjects,
 278                           const ModelHighAPI_Selection& theToObject,
 279                           const ModelHighAPI_Double& theToOffset,
 280                           const ModelHighAPI_Selection& theFromObject,
 281                           const ModelHighAPI_Double& theFromOffset)
 282 {
 283   std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_Extrusion::ID());
 284   return ExtrusionPtr(new FeaturesAPI_Extrusion(aFeature,
 285                                                 theBaseObjects,
 286                                                 theToObject,
 287                                                 theToOffset,
 288                                                 theFromObject,
 289                                                 theFromOffset));
 290 }
 291
 292 //==================================================================================================
 293 ExtrusionPtr addExtrusion(const std::shared_ptr<ModelAPI_Document>& thePart,
 294                           const std::list<ModelHighAPI_Selection>& theBaseObjects,
 295                           const ModelHighAPI_Selection& theDirection,
 296                           const ModelHighAPI_Selection& theToObject,
 297                           const ModelHighAPI_Double& theToOffset,
 298                           const ModelHighAPI_Selection& theFromObject,
 299                           const ModelHighAPI_Double& theFromOffset)
 300 {
 301   std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_Extrusion::ID());
 302   return ExtrusionPtr(new FeaturesAPI_Extrusion(aFeature,
 303                                                 theBaseObjects,
 304                                                 theDirection,
 305                                                 theToObject,
 306                                                 theToOffset,
 307                                                 theFromObject,
 308                                                 theFromOffset));
 309 }